OEM 2010 Chrysler PT Cruiser Radiator Support

2010 Chrysler PT Cruiser Radiator Support Parts and Q&A

• Q: How to install a radiator support on 2010 Chrysler PT Cruiser?

  A: Mount the upper radiator support in front of the car and attach it to the fenders by using six bolts you need to tighten well. After that, put the bolt through the support bracket and the upper radiator support to secure them and tighten it securely. If the kit contains the ambient temperature sensor, fit it onto the support bracket accordingly. Should you remove both options, nail the hood latch down once again onto the upper radiator support. Go ahead and install the upper grille. Should you decide to remove the hood, fit the adjustment bumpers to the upper part of the radiator support. Also, in case you take out the radiator, put on the support brackets for the radiator's upper mounting brackets. Place the seal onto the outer edge of the upper radiator support bracket and inspect that the hood closes properly and is aligned with a gap of 4 mm (0.160 in.) on all sides of the vehicle.