How to Install a Brake Light Switch on 2010 Dodge Avenger?

Installation of the stop lamp switch will require extension of the plunger, and connection of the wiring harness and fitting the switch by pressing the brake pedal and fitting it between the bracket and the switch. Do not press too hard at the brake pedal, and then test the brake lamps and speed control are operating.

OEM 2010 Dodge Avenger Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2010 Dodge Avenger Lamp Switch Part Number: 56054001AD
$37.64 MSRP: $54.10
You Save: $16.46 (31%)
ADD TO CART
Product Specifications
- Other Name: Switch - Stop Lamp; Brake Light Switch; Stoplamp Switch; Switch; Switch Stop Lamp
- Replaces: 56054001AB, 56054001AC, 56054001AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 2.3 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56054001AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Avenger Submodels:
- Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 2.4L L4, 2.7L V6, 3.5L V6, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX

2010 Dodge Avenger Brake Light Switch Parts and Q&A

Q: How to Install a Brake Light Switch on 2010 Dodge Avenger?
A: Installation of the stop lamp switch will require extension of the plunger, and connection of the wiring harness and fitting the switch by pressing the brake pedal and fitting it between the bracket and the switch. Do not press too hard at the brake pedal, and then test the brake lamps and speed control are operating.