How to Service and Repair a Brake Light Switch on Dodge Avenger?

The first step in brake light switch service is disconnecting and separating the battery negative cable from its spot on the battery. If the car has a silencer pad, take it out from below the steering column. After that, detach the wire from the connector on the switch (4). Rotate the stop lamp switch toward the back of the bracket 30 degrees and at the same time, pull it slowly. Lose the stop lamp switch and do not try to reuse it.

How to Install a Brake Light Switch on Dodge Avenger?

To install the stop lamp switch, hold the switch tightly and then pull outwards on the plunger. After that, attach the wiring harness connector (1) to the stop lamp switch (2). Place the stop lamp switch into the bracket attached to the brake pedal assembly (6) by pressing the brake all the way down, aligning its index key with the notch in the square hole and twisting the switch clockwise. Avoid applying too much force when you pull back on the brake pedal, because it could break the stop lamp switch or striker. After that, apply the brake slowly and watch until it stops moving, allowing the switch plunger to ratchet backward and verify that both the brake lamps and speed control function as expected.

OEM Dodge Avenger Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Light Switches found

View related parts
Dodge Avenger Lamp Switch Part Number: 56054001AD
$37.64 MSRP: $54.10
You Save: $16.46 (31%)
ADD TO CART
Product Specifications
- Other Name: Switch - Stop Lamp; Brake Light Switch; Stoplamp Switch; Switch; Switch Stop Lamp
- Replaces: 56054001AB, 56054001AC, 56054001AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2014 Dodge Avenger | Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 2.4L L4, 2.7L V6, 3.5L V6, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Dodge Avenger Brake Switch Part Number: MB596608
$23.33 MSRP: $29.57
You Save: $6.24 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Stop Lamp; Brake Light Switch; Stop Light Switch; Brake Pedal Switch; Stoplamp Switch, 2 Contact Points, with Speed Control.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Dodge Avenger | Base, ES | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Avenger Stoplamp Switch Part Number: MR122560
Product Specifications
- Other Name: Switch - Stop Lamp; Brake Light Switch; Switch, Stop Lamp W/O Speed Control; Switch, Stop Lamp
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Dodge Avenger | Base, ES | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Dodge Avenger Stoplamp Switch Part Number: 8614A023
Product Specifications
- Other Name: Switch - Stop Lamp; Brake Light Switch
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Dodge Avenger | Base, ES | 6 Cyl 2.5 L GAS
View related parts
Dodge Avenger Switch Package - Stop Lamp Part Number: 5083344AB
Product Specifications
- Other Name: SW PKG-STOP LAMP
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Avenger | R/T, SE, SXT | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

Dodge Avenger Brake Light Switch

Choose OEM Brake Light Switch that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Brake Light Switch follows strict manufacturing steps to lock in quality and fit. If your Dodge Avenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Avenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Brake Light Switch in Dodge Avenger vehicles is an important part and this is to relay a signal to the brake lights to turn on when the brake pedal is pressed. This function is important as it informs drivers behind the Dodge Avenger that this car is slowing down or coming to a stop. The working of the Brake Light Switch revolves around the identification of force exerted on the brake pedal and then the switching on of the brake lights so that other vehicles behind can see them. It is understood with regard to the Dodge Avenger that over the years it might have included several types of Brake Light Switches but the differences are not clearly outlined in the presented data. Every Brake Light Switch model that is fitted in the Dodge Avenger is built on the key principle of increasing the level of road safety by providing clear signals to other road users of the driver's intention to reduce speed or halt completely. Altogether, it is imperative to understand that the Brake Light Switch as an essential safety mechanism is installed in Dodge Avenger models. The Brake Light Switch assists in avoiding such collision by making sure that the rear brake lights switch on each time the vehicular brakes are engaged.

Dodge Avenger Brake Light Switch Parts and Q&A

Switch Package - Stop Lamp
5083344AB
Q: How to Service and Repair a Brake Light Switch on Dodge Avenger?
A:
The first step in brake light switch service is disconnecting and separating the battery negative cable from its spot on the battery. If the car has a silencer pad, take it out from below the steering column. After that, detach the wire from the connector on the switch (4). Rotate the stop lamp switch toward the back of the bracket 30 degrees and at the same time, pull it slowly. Lose the stop lamp switch and do not try to reuse it.
Lamp Switch
56054001AD
Q: How to Install a Brake Light Switch on Dodge Avenger?
A:
To install the stop lamp switch, hold the switch tightly and then pull outwards on the plunger. After that, attach the wiring harness connector (1) to the stop lamp switch (2). Place the stop lamp switch into the bracket attached to the brake pedal assembly (6) by pressing the brake all the way down, aligning its index key with the notch in the square hole and twisting the switch clockwise. Avoid applying too much force when you pull back on the brake pedal, because it could break the stop lamp switch or striker. After that, apply the brake slowly and watch until it stops moving, allowing the switch plunger to ratchet backward and verify that both the brake lamps and speed control function as expected.