Other Name:Switch - Window And Door Lock; Door Window Switch, Front Left; Switch Window And Door Lock Left Hand Drive; Switch Window And Door Lock; Door Window Switch
Other Name:Switch - Window And Door Lock; Door Window Switch, Front Left; Switch Window And Door Lock; Switch Power Window; Door Window Switch
Position:Front Driver Side
Replaces:4602736AA
Item Weight:0.80 Pounds
Item Dimensions:2.7 x 2.8 x 6.8 inches
Condition:New
Fitment Type:Direct Replacement
SKU:4602781AA
Warranty:This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Avenger Submodels:
Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
2010 Dodge Avenger Power Window Switch Parts and Q&A
Q: How to Repair and Maintain a Power Window Switch on 2010 Dodge Avenger?
A: You should take care of the battery first by disconnecting and isolating the negative cable to work on the power window switch. With the front door, pull off the door trim panel, remove the switch wire connector and take out the switch assembly next. After that, break the negative battery connection for the rear door, unscrew the interior handle, disconnect its electrical cable and remove the switch from the handle.