Other Name: Antenna - Base Cable And Bracket; Radio Antenna Base; Radio Antenna Mast; Antenna Assembly; Base; Antenna; Cable; Antenna Base Cable And Bracket
Other Name: Antenna - Keyless Entry; Antenna Keyless Entry
Replaced by: 5026236AE
Item Weight: 0.50 Pounds
Item Dimensions: 8.3 x 7.7 x 0.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5026236AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2010 Dodge Avenger Submodels:
Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
2010 Dodge Avenger Antenna Parts and Q&A
Q: How to Detach the Antenna from Both a Sedan and a Convertible on 2010 Dodge Avenger?
A: Before removing the radio antenna, disconnect the battery negative cable and isolate it. With the sedan, pull down the headliner and then remove both of the antenna's loosened connections, unfasten the antenna base and take it out. When dealing with a convertible, pull the battery negative cable out and away from the battery, remove the decklid liner as needed, detach the electrical connectors, remove the antenna base screw and then take out the antenna.