Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2010 Dodge Avenger Shift Cable

Transmission Shift Cable
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Shift Cables found

  • 2010 Dodge Avenger Shift Cable - 5273214AG
    2010 Dodge Avenger Shift Cable - 5273214AG
    2010 Dodge Avenger Shift Cable - 5273214AG
    2010 Dodge Avenger Shift Cable - 5273214AG
    2010 Dodge Avenger Shift Cable - 5273214AG
    2010 Dodge Avenger Shift Cable Diagram - 5273214AG
    View related parts

    2010 Dodge Avenger Shift Control Cable Part Number: 5273214AG

    $230.00 MSRP: $343.00
    You Save: $113.00 (33%)
    ADD TO CART
    Product Specifications
    • Other Name: Cable - Gearshift Control; Automatic Transmission Shifter Cable; Cable Gearshift Control
    • Replaces: 5273214AD, 5273214AF, 5273214AE
    • Item Weight: 1.40 Pounds
    • Item Dimensions: 3.0 x 12.9 x 14.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5273214AG
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2010 Dodge Avenger Submodels:
    • Express, Heat, Lux, Mainstreet, R/T, SE, SXT | 2.4L L4, 2.7L V6, 3.5L V6, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX
  • 2010 Dodge Avenger Shift Cable - 68105824AB
    2010 Dodge Avenger Shift Cable Diagram - 68105824AB
    View related parts

    2010 Dodge Avenger Shift Control Cable Part Number: 68105824AB

    Product Specifications
    • Other Name: Cable - Gearshift Control; Automatic Transmission Shifter Cable; Cable Gearshift Control
    • Replaces: 68037777AA, 68037777AB, 68105824AA
    • Item Weight: 1.50 Pounds
    • Item Dimensions: 58.8 x 4.0 x 3.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 68105824AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2010 Dodge Avenger Submodels:
    • Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX

2010 Dodge Avenger Shift Cable Parts and Q&A

  • Q: How to Install and Adjust a Shift Cable Properly on 2010 Dodge Avenger?
    A: Begin installation by fitting the shift cable assembly into the floor pan tunnel hole and then securing grommet 3 with a little synthetic-based oil. Pass the cable through retainer clip 2, close the clip to fix it in place and run the cable up to the transaxle shift lever. Pull the car back down and fit cable 1 to bracket 2, then put the other end onto transaxle shift lever 3. Secure cable 2 to the bracket for the shifter conduit, attach cable 2 to shift pin 4 and insert cable retaining clip 1. Send the shift lever on the floor to the Park position and the one on the transaxle to N position and tighten the cable adjuster nut to 23 Nm (200 ft. lbs.). First, install center console assembly 1, then gearshift bezel 2 and finally tighten set screw 2 on gearshift knob 1 to 2 Nm (20 in. lbs.). Make certain the engine starter works properly by only engaging when the gear shifter is set to Park and Neutral. Take care of any adjustments needed.

Related 2010 Dodge Avenger Parts

Alternate Year Models

+
2009 Dodge Avenger Shift Cable 2011 Dodge Avenger Shift Cable