How to Remove an Antenna Mast on 2010 Dodge Caliber?

The first step in disconnecting the Navigation Antenna Mast is to remove the battery negative wire from the cable. After that, remove the cover of the instrument panel. Once that's done, use the recommended method to remove the radio. After you have the nuts, remove them from the antenna mounts and disconnect the antenna cable from the wire harness.

OEM 2010 Dodge Caliber Antenna Mast

Radio Antenna Mast

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Antenna Mast found

View related parts
2010 Dodge Caliber Antenna Mast Part Number: 56043311AC
$41.30 MSRP: $61.60
You Save: $20.30 (33%)
ADD TO CART
Product Specifications
- Other Name: Mast - Antenna; Radio Antenna Mast; Antenna Assembly; Mast; Mast Antenna
- Replaces: 4685574AF, 56043311AA, 56043311AB, 4794176AE, 4685574AE, 4685574AH
- Item Weight: 1.40 Pounds
- Item Dimensions: 0.4 x 0.5 x 33.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56043311AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2010 Dodge Caliber Antenna Mast Parts and Q&A

Q: How to Remove an Antenna Mast on 2010 Dodge Caliber?
A: The first step in disconnecting the Navigation Antenna Mast is to remove the battery negative wire from the cable. After that, remove the cover of the instrument panel. Once that's done, use the recommended method to remove the radio. After you have the nuts, remove them from the antenna mounts and disconnect the antenna cable from the wire harness.