Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2010 Dodge Caliber Center Console Base

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Center Console Bases found

  • 2010 Dodge Caliber Center Console Base - 1QW52XDVAA
    2010 Dodge Caliber Center Console Base Diagram - 1QW52XDVAA
    View related parts

    2010 Dodge Caliber Console Base, Gray, Center Part Number: 1QW52XDVAA

    Product Specifications
    • Other Name: Console - Base; Center Console, Center
    • Position: Center
    • Item Weight: 4.50 Pounds
    • Item Dimensions: 33.7 x 17.9 x 9.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 1QW52XDVAA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2010 Dodge Caliber Submodels:
    • Express, Heat, Mainstreet, R/T, Rush, SE, SXT, Uptown | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
  • 2010 Dodge Caliber Center Console Base - 1QW52BD3AA
    2010 Dodge Caliber Center Console Base Diagram - 1QW52BD3AA
    View related parts

    2010 Dodge Caliber Console Base, Beige, Center Part Number: 1QW52BD3AA

    Product Specifications
    • Other Name: Console - Base; Center Console, Center
    • Position: Center
    • Item Weight: 4.50 Pounds
    • Item Dimensions: 32.6 x 16.5 x 9.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 1QW52BD3AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2010 Dodge Caliber Submodels:
    • Express, Heat, Mainstreet, R/T, Rush, SE, SXT, Uptown | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2010 Dodge Caliber Center Console Base Parts and Q&A

  • Q: How to install the Center Console Base on 2010 Dodge Caliber?
    A: If you are going to use a shifter, install it before moving on. Carry the center console over the parking brake in the center and make sure to put the parking brake up. Link the console connector to the insect panel connector. Tighten the front of the retainers until they find the position behind the front floor bracket where they click. Slide in and secure two rear screws into the rear floor bracket. Install the front console shifter housing for the front shifter housing and use two rear screws to secure it. Connect all the electrical connections, put the accessory switch bank back into place and confirm the clips are all seated. After all that, install the shift bezel to your console.

Related 2010 Dodge Caliber Parts

Alternate Year Models

+
2009 Dodge Caliber Center Console Base