How to Remove a Seat Heater Pad from a Heated Seat on 2010 Dodge Caliber?

To take the heater pad off, disconnect the negative cable from the battery, then take off the seat cushion or back trim cover. Disconnect the electrical connectors for the heated seat element, and carefully peel the heating element of the foam cushions using the adhesive lines, without excessive foam.

OEM 2010 Dodge Caliber Seat Heater

Seat Warmer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Seat Heaters found

View related parts
2010 Dodge Caliber Seat Back Heater, Front Driver Side Part Number: 5183316AA
Product Specifications
- Other Name: Pad - Heater; Seat Heater Pad, Front Left; Element; Pad Heater Seat Back; Pad Heater Back; Seat Heater
- Position: Front Driver Side
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.6 x 7.1 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5183316AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Dodge Caliber Seat Cushion Heater, Front Passenger Side Part Number: 5183317AA
Product Specifications
- Other Name: Pad - Heater; Seat Heater Pad, Front Left Lower, Front Right, Front Right Upper; Seat Back Heater; Element; Pad Heater Seat Back; Pad Heater Cushion; Pad Heater Back; Seat Heater
- Position: Front Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 10.3 x 6.4 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5183317AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Dodge Caliber Seat Cushion Heater, Front Driver Side Part Number: 5183318AA
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Heater Pad, Front Left, Front Right; Element; Heated Pad Seat Cushion; Pad Heater Cushion; Pad Heater; Seat Heater
- Position: Front Driver Side
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.4 x 6.1 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5183318AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2010 Dodge Caliber Seat Heater Parts and Q&A

Q: How to Remove a Seat Heater Pad from a Heated Seat on 2010 Dodge Caliber?
A: To take the heater pad off, disconnect the negative cable from the battery, then take off the seat cushion or back trim cover. Disconnect the electrical connectors for the heated seat element, and carefully peel the heating element of the foam cushions using the adhesive lines, without excessive foam.