How to Install a Wiper Motor on 2010 Dodge Caliber?

First, pop a new rubber grommet into the clearance hole in the liftgate glass using the rear wiper motor output shaft, to ensure it is installed properly. Make sure the three U-nuts are placed correctly and in good shape inside the liftgate inner panel. Once you have taken out the wiper motor, add Mopar(R) Nye Synthetic Lubricant or Fluorocarbon Gel 880 Synthetic Lubricant, to the shaft just below the taper to contact the grommet before setting it back in place to avoid early grommet wear, added loads on the motor and leaks of any water. Then, direct the rear wiper motor shaft through the rubber grommet on the liftgate glass, screw the motor and bracket together as one to the appropriate U-nuts inside the liftgate and attach the bracket to the liftgate with three screws. Connect the wire harness, clip the trim onto the liftgate and place the rear wiper arm onto its output shaft. After that, reattach the negative battery cable to the battery terminal.

OEM 2010 Dodge Caliber Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Motors found

View related parts
2010 Dodge Caliber Wiper Transmission Part Number: 5303780AG
$60.94 MSRP: $159.00
You Save: $98.06 (62%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Windshield Wiper; Wiper Linkage; Motor & Linkage
- Replaces: 5303780AB, 5303780AE, 5303780AC, 5303780AD, 5303780AF
- Item Weight: 7.10 Pounds
- Item Dimensions: 36.0 x 12.2 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5303780AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Dodge Caliber Wiper Motor Part Number: 5183273AB
$107.29 MSRP: $185.00
You Save: $77.71 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Windshield Wiper; Windshield Wiper Motor; Motor Kit Windshield Wiper
- Replaces: 5183273AA
- Item Weight: 3.30 Pounds
- Item Dimensions: 10.8 x 6.0 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5183273AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 1.8L L4, 2.0L L4, 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Dodge Caliber Wiper Motor Part Number: 5116146AE
$95.89 MSRP: $144.00
You Save: $48.11 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor, Liftgate Wiper; Back Glass Wiper Motor; Rear Motor; Motor Liftgate Wiper
- Replaces: 5116146AD, 5116146AC
- Item Weight: 2.40 Pounds
- Item Dimensions: 10.4 x 6.3 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5116146AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2010 Dodge Caliber Wiper Motor Parts and Q&A

Q: How to Install a Wiper Motor on 2010 Dodge Caliber?
A: First, pop a new rubber grommet into the clearance hole in the liftgate glass using the rear wiper motor output shaft, to ensure it is installed properly. Make sure the three U-nuts are placed correctly and in good shape inside the liftgate inner panel. Once you have taken out the wiper motor, add Mopar(R) Nye Synthetic Lubricant or Fluorocarbon Gel 880 Synthetic Lubricant, to the shaft just below the taper to contact the grommet before setting it back in place to avoid early grommet wear, added loads on the motor and leaks of any water. Then, direct the rear wiper motor shaft through the rubber grommet on the liftgate glass, screw the motor and bracket together as one to the appropriate U-nuts inside the liftgate and attach the bracket to the liftgate with three screws. Connect the wire harness, clip the trim onto the liftgate and place the rear wiper arm onto its output shaft. After that, reattach the negative battery cable to the battery terminal.