Other Name: Handle - Door Pull; Interior Door Pull Handle, Front; Handle Door Pull Carbon Leather; Handle Door Pull
Position: Front
Item Weight: 0.90 Pounds
Item Dimensions: 6.2 x 2.0 x 1.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68054650AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
SRT8 | 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS
2010 Dodge Challenger Door Handle Parts and Q&A
Q: How to Install a Door Handle and Its Related Components on 2010 Dodge Challenger?
A: Make sure the front exterior handle is in place and hold it there with the exterior handle mounting screws, set to 5 Nm (44 in. lbs.). For the driver side, match the lock cylinder link with its retainer, add the door handle release link and finally add the plastic retainer for the release link. After that, apply the watershield, fit the speaker and clip on the trim panel. If there is Automatic Express Up, recalibration of the feature becomes necessary after any disruption to door module power.