How to Remove a Wiper Motor on 2010 Dodge Challenger?

To remove the wiper motor, remove the negative battery cable and remove the front wiper module. Keep the bellcrank nut in place so there are no timing problems. Pry the linkage off the bellcrank, remove the motor mounting bolts and store the pocket nuts for reinstallation before separating the motor.

OEM 2010 Dodge Challenger Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Motor found

View related parts
2010 Dodge Challenger Wiper Motor Part Number: 68044164AA
$173.35 MSRP: $255.00
You Save: $81.65 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Windshield Wiper; Windshield Wiper Motor; Motor Kit Windshield Wiper
- Item Weight: 3.00 Pounds
- Item Dimensions: 10.5 x 6.4 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68044164AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, Rallye Redline, SE, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

2010 Dodge Challenger Wiper Motor Parts and Q&A

Q: How to Remove a Wiper Motor on 2010 Dodge Challenger?
A: To remove the wiper motor, remove the negative battery cable and remove the front wiper module. Keep the bellcrank nut in place so there are no timing problems. Pry the linkage off the bellcrank, remove the motor mounting bolts and store the pocket nuts for reinstallation before separating the motor.