How Does the Wiper Pivot Influence the Installation of the Wiper Motor Linkage on 2010 Dodge Challenger?

Installation of the wiper motor linkage involves checking the grommet and changing it in case it is damaged. Install the wiper module and fit the dowel. Fit and tighten the retaining bolts to 8 Nm, fit the electrical connector, fit the cowl panel, wiper arms and tighten the nuts to 18 Nm. Connect the negative cable of the battery again.

OEM 2010 Dodge Challenger Wiper Pivot

Windshield Wiper Pivot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Pivot found

View related parts
2010 Dodge Challenger Wiper Transmission Part Number: 68044165AA
$314.97 MSRP: $464.00
You Save: $149.03 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pivot - Wiper; Windshield Wiper Linkage; Linkage Assembly; Pivot And Linkage Wiper; Wiper Linkage
- Item Weight: 6.30 Pounds
- Item Dimensions: 39.8 x 10.2 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68044165AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Challenger Submodels:
- 392 Hemi Scat Pack Shaker, GT, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, Rallye Redline, SE, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, SXT, SXT Plus, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

2010 Dodge Challenger Wiper Pivot Parts and Q&A

Q: How Does the Wiper Pivot Influence the Installation of the Wiper Motor Linkage on 2010 Dodge Challenger?
A: Installation of the wiper motor linkage involves checking the grommet and changing it in case it is damaged. Install the wiper module and fit the dowel. Fit and tighten the retaining bolts to 8 Nm, fit the electrical connector, fit the cowl panel, wiper arms and tighten the nuts to 18 Nm. Connect the negative cable of the battery again.