How to Service a Brake Light Switch on 2010 Dodge Grand Caravan?

First, turn off the SRS to stop anything from triggering the air bag by disconnecting the negative cable of the battery and waiting for two minutes. The brake lamp switch is (3) on the pedal support bracket (1) under the steering column. Press and hold the brake pedal after finding it. Move the brake lamp switch housing (2) by turning it counterclockwise 30 degrees to bring the switch locking collar over the keyed square hole on the brake pedal mounting bracket (1). Pull the switch all the way back so it breaks contact with the bracket and once that's done, release the brake pedal. At this point, disconnect the body wire harness connector (2) from the brake lamp switch.

OEM 2010 Dodge Grand Caravan Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2010 Dodge Grand Caravan Brake Switch Part Number: 4671336AD
$39.68 MSRP: $53.75
You Save: $14.07 (27%)
ADD TO CART
Product Specifications
- Other Name: Switch - Stop Lamp; Brake Light Switch; Stop Light Switch; Brake Pedal Switch; Lamp Switch; Release Switch; Stoplamp Switch; Switch; Switch Stop Lamp
- Replaces: 4671336, 4671336AC, 4671336AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.6 x 2.0 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4671336AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Grand Caravan Submodels:
- American Value Package, Base, C/V, Crew, ES, Express, GT, LE, Mainstreet, R/T, SE, SE 30th Anniversary Edition, SE Plus, SXT, SXT 30th Anniversary Edition, Sport | 3.3L V6, 3.6L V6, 3.8L V6, 4 Cyl 2.4 L GAS, 4.0L V6, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2010 Dodge Grand Caravan Brake Light Switch Parts and Q&A

Q: How to Service a Brake Light Switch on 2010 Dodge Grand Caravan?
A: First, turn off the SRS to stop anything from triggering the air bag by disconnecting the negative cable of the battery and waiting for two minutes. The brake lamp switch is (3) on the pedal support bracket (1) under the steering column. Press and hold the brake pedal after finding it. Move the brake lamp switch housing (2) by turning it counterclockwise 30 degrees to bring the switch locking collar over the keyed square hole on the brake pedal mounting bracket (1). Pull the switch all the way back so it breaks contact with the bracket and once that's done, release the brake pedal. At this point, disconnect the body wire harness connector (2) from the brake lamp switch.