How to install a shift cable on 2010 Dodge Grand Caravan?

See that the rubber grommet in the bulkhead is pushed in all the way before you attach the shift cable to stop water leaks. Then, fit the shift cable through the bulkhead (1), coming through from the passenger compartment and seat the rubber grommet there. Once the gearshift cable has been attached to the bracket, connect it to the manual valve lever inside the transaxle. Be sure the cable's lock tab (2) ends up fitted to the shifter housing after everything is attached. At last, put the cable onto the shifter and place the knee blocker.

OEM 2010 Dodge Grand Caravan Shift Cable

Transmission Shift Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Shift Cable found

View related parts
2010 Dodge Grand Caravan Shift Control Cable Part Number: 4880207AH
Product Specifications
- Other Name: Cable - Gearshift Control; Automatic Transmission Shifter Cable
- Replaces: 4880207AD, 4880207AC, 4880207AF, 4880207AE, 4880207AG
- Item Weight: 1.30 Pounds
- Item Dimensions: 50.2 x 1.8 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4880207AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2010 Dodge Grand Caravan Submodels:
- C/V, SE, SXT | 3.3L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2010 Dodge Grand Caravan Shift Cable Parts and Q&A

Q: How to install a shift cable on 2010 Dodge Grand Caravan?
A: See that the rubber grommet in the bulkhead is pushed in all the way before you attach the shift cable to stop water leaks. Then, fit the shift cable through the bulkhead (1), coming through from the passenger compartment and seat the rubber grommet there. Once the gearshift cable has been attached to the bracket, connect it to the manual valve lever inside the transaxle. Be sure the cable's lock tab (2) ends up fitted to the shifter housing after everything is attached. At last, put the cable onto the shifter and place the knee blocker.