How to Service and Repair a Front Door Hinge on Chrysler 300M?

Before starting, mark where the hinge is located on the hinge pillar. First remove the bolt and nut connecting the hinge to the front door, next take out the hinge bolts and finally free the hinge from the vehicle. First, take out the door hinge if you have a double ended stud mechanism. Double up the nut on the stud and take it out of the door frame; if it's broken, use locking pliers at the shoulder to back it out. For installation, put the hinge bracket on the car and tighten the bolt and nut after it's in place, so the bolt reaches a torque of 28 N.m (250 in.lbs.). After that, connect the hinge to the front door with the included bolt and nut, Allowing for a torque of 28 N.m (250 in.lbs.). If you have changed the double ended stud, be sure to tighten it to 14 N.m (120 in.lbs.). When the door is installed, inspect it to ensure it is both aligned and working properly; improve alignment as needed. If using a double ended stud, make sure replacement studs have been coated in thread sealer. If you are using the original studs, apply Mopar® Lock and Seal Adhesive or something similar to the threads before installing. Hold the double ended stud against the frame, tighten it to 14 N.m (120 in.lbs.) and then mount the hinge and tighten the hinge bolt and nut to 28 N.m (250 in.lbs.). Confirm the door operates well and makes no strange sounds and if it does, readjust it.

How to Service and Repair a Rear Door Hinge on Chrysler 300M?

To service and repair the rear door hinge mark fist the outline of the hinge on the B-pillar and door end frame. Remove the nut and bolt that holds hinge to B pillar then remove the nut and bolt that attach hinge to door end frame. Once the hinge has been removed from the door realign the new hinge to the marks on the end of the door frame and position it in place. Install all the nuts and bolts which attach the hinge to the door end frame, aligning the hinge to the marks on the B pillar then finally installing all the nuts and bolts which attach the hinge to the B pillar. Finally, check the door alignment and operation and make any adjustments.

OEM Chrysler 300M Door Hinge

Interior Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Door Hinges found

View related parts
Chrysler 300M Hinge, Rear Driver Side Part Number: 4575657AE
$28.17 MSRP: $162.00
You Save: $133.83 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Deck Lid; Deck Lid Hinge, Rear Left; Door Hinge
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chrysler 300M | Base, Pro-Am, Special | 6 Cyl 3.5 L GAS
View related parts
Chrysler 300M Lower Hinge, Rear Passenger Side Part Number: 4574436
$6.21 MSRP: $7.87
You Save: $1.66 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Rear Door Lower; Door Hinge, Rear Right Lower; Hinge Rear Door Lower; Door Hinge
- Position: Rear Lower Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chrysler 300M | Base, Pro-Am, Special | 6 Cyl 3.5 L GAS
View related parts
Chrysler 300M Upper Hinge, Front Passenger Side Part Number: 4574274AB
Product Specifications
- Other Name: Hinge - Front Door Upper; Door Hinge, Front Right Upper; Hinge Front Door Upper; Door Hinge
- Position: Front Upper Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chrysler 300M | Base, Pro-Am, Special | 6 Cyl 3.5 L GAS
View related parts
Chrysler 300M Lower Hinge, Front Passenger Side Part Number: 4574300AB
Product Specifications
- Other Name: Hinge - Front Door Lower; Door Hinge, Front Right Lower; Hinge Front Door Lower; Door Hinge
- Position: Front Lower Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chrysler 300M | Base, Pro-Am, Special | 6 Cyl 3.5 L GAS
View related parts
Chrysler 300M Lower Hinge, Rear Driver Side Part Number: 4574437
Product Specifications
- Other Name: Hinge - Rear Door Lower; Door Hinge, Rear Left Lower; Hinge Rear Door Lower; Door Hinge
- Position: Rear Lower Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chrysler 300M | Base, Pro-Am, Special | 6 Cyl 3.5 L GAS
View related parts
Chrysler 300M Upper Hinge, Rear Driver Side Part Number: 4574429
Product Specifications
- Other Name: Hinge - Rear Door Upper; Door Hinge, Rear Left Upper; Hinge Rear Door Upper; Door Hinge
- Position: Rear Upper Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chrysler 300M | Base, Pro-Am, Special | 6 Cyl 3.5 L GAS
View related parts
Chrysler 300M Upper Hinge, Rear Passenger Side Part Number: 4574428
Product Specifications
- Other Name: Hinge - Rear Door Upper; Door Hinge, Rear Right Upper; Hinge Rear Door Upper; Door Hinge
- Position: Rear Upper Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chrysler 300M | Base, Pro-Am, Special | 6 Cyl 3.5 L GAS
View related parts
Chrysler 300M Upper Hinge, Front Driver Side Part Number: 4574275AB
Product Specifications
- Other Name: Hinge - Front Door Upper; Door Hinge, Front Left Upper; Hinge Front Door Upper; Door Hinge
- Position: Front Upper Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chrysler 300M | Base, Pro-Am, Special | 6 Cyl 3.5 L GAS
View related parts
Chrysler 300M Lower Hinge, Front Driver Side Part Number: 4574301AB
Product Specifications
- Other Name: Hinge - Front Door Lower; Door Hinge, Front Left Lower; Hinge Front Door Lower; Door Hinge
- Position: Front Lower Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chrysler 300M | Base, Pro-Am, Special | 6 Cyl 3.5 L GAS
View related parts
Chrysler 300M Hinge, Rear Passenger Side Part Number: 4575656AE
Product Specifications
- Other Name: Hinge - Deck Lid; Deck Lid Hinge, Rear Right; Door Hinge
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chrysler 300M | Base, Pro-Am, Special | 6 Cyl 3.5 L GAS

Chrysler 300M Door Hinge

Choose OEM Door Hinge that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Door Hinge follows strict manufacturing steps to lock in quality and fit. If your Chrysler 300M matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine 300M parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Thus, the Chrysler 300M Door Hinge is an indispensable component with a decisive influence on the comfort parameters and safety of the Chrysler 300M vehicles. It is the part designed to fasten the door to the vehicle frame and allow seamless swinging that grants the passengers easy access. Chrysler 300M Door Hinge is of reliable build, which is used steel for construction and the product may be coated for adding corrosion protection. Different models of Chrysler 300M can be easily fitted which means that the performance of each car is not compromised in any way. With time, the use of a Door Hinge results in problems like depreciated door firmness; in fact, it can get to a stage where the door sags compromising on safety, thus appropriate maintenance on the Door Hinge is important. Notably, the Chrysler 300M Door Hinge may have the additional features of hardened steel pins and brass bushings making it even easier to replace worn out components. Furthermore, contemporary doors come with door check straps that help to increase the amplitude of the door's swing and eliminate possible harm. This attention paid to miniscule aspects not only enhances the functionality of the Chrysler 300M but at the same time, greatly enhances the safety of the car's occupants. It's a great apparatus that is built to withstand much force and is also designed uniquely to complement the Chrysler brand of cars in the market. All in all, the Chrysler 300M Door Hinge is one more evidence of the vehicle's sophisticated design and fulfilling all the client's expectations to provide safe and comfortable ride.

Chrysler 300M Door Hinge Parts and Q&A

Lower Hinge, Front Passenger Side
4574300AB
Q: How to Service and Repair a Front Door Hinge on Chrysler 300M?
A:
Before starting, mark where the hinge is located on the hinge pillar. First remove the bolt and nut connecting the hinge to the front door, next take out the hinge bolts and finally free the hinge from the vehicle. First, take out the door hinge if you have a double ended stud mechanism. Double up the nut on the stud and take it out of the door frame; if it's broken, use locking pliers at the shoulder to back it out. For installation, put the hinge bracket on the car and tighten the bolt and nut after it's in place, so the bolt reaches a torque of 28 N.m (250 in.lbs.). After that, connect the hinge to the front door with the included bolt and nut, Allowing for a torque of 28 N.m (250 in.lbs.). If you have changed the double ended stud, be sure to tighten it to 14 N.m (120 in.lbs.). When the door is installed, inspect it to ensure it is both aligned and working properly; improve alignment as needed. If using a double ended stud, make sure replacement studs have been coated in thread sealer. If you are using the original studs, apply Mopar® Lock and Seal Adhesive or something similar to the threads before installing. Hold the double ended stud against the frame, tighten it to 14 N.m (120 in.lbs.) and then mount the hinge and tighten the hinge bolt and nut to 28 N.m (250 in.lbs.). Confirm the door operates well and makes no strange sounds and if it does, readjust it.
Lower Hinge, Rear Passenger Side
4574436
Q: How to Service and Repair a Rear Door Hinge on Chrysler 300M?
A:
To service and repair the rear door hinge mark fist the outline of the hinge on the B-pillar and door end frame. Remove the nut and bolt that holds hinge to B pillar then remove the nut and bolt that attach hinge to door end frame. Once the hinge has been removed from the door realign the new hinge to the marks on the end of the door frame and position it in place. Install all the nuts and bolts which attach the hinge to the door end frame, aligning the hinge to the marks on the B pillar then finally installing all the nuts and bolts which attach the hinge to the B pillar. Finally, check the door alignment and operation and make any adjustments.