How to Service and Repair a Front Door Window Regulator on Chrysler 300M?

For service and repair of the front door window regulator, first cover the flag, take out the door trim panel, water shield and the pull cup support bracket. After that, pull out the glass from the regulator channel and disconnect the wire to the power window motor. Loose the screw holding the regulator support brace to the door panel and then take out the screw and bolt heads from the cuts in the door panel. Unbolt the regulator from the door panel and take the regulator out. Pull the regulator toward you and turn the front part of the roller channel through the door's access hole. Insert the roller channel into the access hole above the door panel and put the bolt heads on the regulator into the keyhole slots in the panel. Fasten the bolts holding the regulator to the door panel, attach the regulator support brace to the door panel with its bolt and attach the regulator scissors channel to the door panel with its screw. Connect the window motor to the regulator, guide the glass into the regulator roller, center it and see if everything works properly. After that, you should install the pull cup support bracket, water shield, door trim panel and flag cover.

How to Service and Repair a Window Regulator for the Rear Door on Chrysler 300M?

Start by taking off the flag cover, then uncover the door trim panel, water shield if needed and the support bracket for the pull cup. After that, move the glass out of the regulator roller channel and take out the power window motor wire connector. Untighten the screw joining the regulator scissor channel to the door panel and then take out the screw and bolt heads from the keyhole holes. First loosen the bolt holding the regulator support brace to the door panel and then loosen the bolts that secure the regulator to the door panel. To get rid of the regulator, pull it straight back and turn the front section of the roller channel through the hole cut into the door panel. To fix the strike plate, slip the roller channel into the door's access hole, then put the bolt and screw through the keyhole slots. Secure the regulator to the door panel by tightening the bolts and afterward screw in the bolt holding the regulator support brace and the screw for the regulator scissor channel. Attach the power window motor wire connector, bring the door glass onto the regulator channel, adjust it and operate the glass to confirm it works. After that, put back the pull cup support bracket, water shield, door trim panel and flag cover.

OEM Chrysler 300M Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Window Regulators found

View related parts
Chrysler 300M Window Regulator, Front Driver Side Part Number: 4574093AS
$296.40 MSRP: $538.00
You Save: $241.60 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Left; Regulator
- Position: Front Driver Side
- Replaces: 4574093AO, 4574093AR, 4574093AN, 4574093AI, 4574093AQ, 4574093AP, 4574093AM, 4574093AG, 4574093AJ, 4574093AK, 4574093AL
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chrysler 300M | Base, Pro-Am, Special | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler 300M Window Regulator, Front Driver Side Part Number: 4574093AI
$368.69 MSRP: $538.00
You Save: $169.31 (32%)
ADD TO CART
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Left
- Position: Front Driver Side
- Replaced by: 4574093AS
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler 300M | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler 300M Window Regulator, Front Passenger Side Part Number: 4574092AS
$166.99 MSRP: $192.00
You Save: $25.01 (14%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Right; Regulator
- Position: Front Passenger Side
- Replaces: 4574092AG, 4574092AQ, 4574092AP, 4574092AL, 4574092AO, 4574092AJ, 4574092AN, 4574092AM, 4574092AK, 4574092AI, 4574092AR
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chrysler 300M | Base, Pro-Am, Special | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler 300M Window Regulator, Rear Passenger Side Part Number: 4574100AH
$174.48 MSRP: $201.00
You Save: $26.52 (14%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Rear Door Window; Window Regulator, Rear Right
- Position: Rear Passenger Side
- Replaced by: 4574100AR
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler 300M | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler 300M Window Regulator, Rear Passenger Side Part Number: 4574100AR
$174.49 MSRP: $201.00
You Save: $26.51 (14%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Rear Door Window; Window Regulator, Rear Right; Regulator
- Position: Rear Passenger Side
- Replaces: 4574100AP, 4574100AN, 4574100AQ, 4574100AM, 4574100AI, 4574100AL, 4574100AK, 4574100AJ, 4574100AH, 4574100AF, 4574100AO
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chrysler 300M | Base, Pro-Am, Special | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler 300M Window Regulator, Rear Driver Side Part Number: 4574101AR
$186.72 MSRP: $215.00
You Save: $28.28 (14%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Rear Door Window; Window Regulator, Rear Left; Regulator
- Position: Rear Driver Side
- Replaces: 4574101AF, 4574101AH, 4574101AO, 4574101AI, 4574101AP, 4574101AL, 4574101AN, 4574101AJ, 4574101AM, 4574101AQ, 4574101AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2004 Chrysler 300M | Base, Pro-Am, Special | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler 300M Window Regulator, Rear Driver Side Part Number: 4574101AH
$186.95 MSRP: $215.00
You Save: $28.05 (14%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Rear Door Window; Window Regulator, Rear Left
- Position: Rear Driver Side
- Replaced by: 4574101AR
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler 300M | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler 300M Window Regulator, Front Passenger Side Part Number: 4574092AI
$167.68 MSRP: $192.00
You Save: $24.32 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator - Front Door Window; Window Regulator, Front Right
- Position: Front Passenger Side
- Replaced by: 4574092AS
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler 300M | Base | 6 Cyl 3.5 L GAS

Chrysler 300M Window Regulator

Choose OEM Window Regulator that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Window Regulator follows strict manufacturing steps to lock in quality and fit. If your Chrysler 300M matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine 300M parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Thus, the importance of the Chrysler 300M Window Regulator makes contributions to improving the Chrysler 300M's performance and safety, which was a front-wheel-drive sports sedan manufactured and marketed since 1999. The intended functionality of this Window Regulator is to effectively open and close the windows, and grant easy access to the occupants thru the use of the window while at the same time fitting appropriately at the center of the door panel. Chrysler 300M models come with different Window Regulators namely scissor and cable types that are manufactured to have superior quality for efficiency. The Chrysler 300M Window Regulator is also reliable, as it is a product designed to last long without undergoing a lot of wear and tear, that is why one does not often find 300M Windows stuck. Chrysler 300M owners can resolve this problem by rigorously acquiring original Window Regulators and install these fresh, superior components in order to maintain window's normal operation for an efficient driving experience and safety. The Chrysler 300M Window Regulator is not just a simple part that performs a mechanical work, they signify conscientiousness that the Chrysler brand has made peculiar for itself. Additional properties like electric motor powering and secure fixated of the Chrysler 300M Window Regulator make this piece prominent in the automotive market to fit the needs of today's automobile users. As this Window Regulator is suitable for shifting between the most recent and previous Chrysler 300M models, this part should be considered critical in supporting the vehicle's internal and external structures to uphold the vehicle's integrity and functionality to reflect the company's reliability factor.

Chrysler 300M Window Regulator Parts and Q&A

Window Regulator, Front Passenger Side
4574092AS
Q: How to Service and Repair a Front Door Window Regulator on Chrysler 300M?
A:
For service and repair of the front door window regulator, first cover the flag, take out the door trim panel, water shield and the pull cup support bracket. After that, pull out the glass from the regulator channel and disconnect the wire to the power window motor. Loose the screw holding the regulator support brace to the door panel and then take out the screw and bolt heads from the cuts in the door panel. Unbolt the regulator from the door panel and take the regulator out. Pull the regulator toward you and turn the front part of the roller channel through the door's access hole. Insert the roller channel into the access hole above the door panel and put the bolt heads on the regulator into the keyhole slots in the panel. Fasten the bolts holding the regulator to the door panel, attach the regulator support brace to the door panel with its bolt and attach the regulator scissors channel to the door panel with its screw. Connect the window motor to the regulator, guide the glass into the regulator roller, center it and see if everything works properly. After that, you should install the pull cup support bracket, water shield, door trim panel and flag cover.
Window Regulator, Rear Driver Side
4574101AR
Q: How to Service and Repair a Window Regulator for the Rear Door on Chrysler 300M?
A:
Start by taking off the flag cover, then uncover the door trim panel, water shield if needed and the support bracket for the pull cup. After that, move the glass out of the regulator roller channel and take out the power window motor wire connector. Untighten the screw joining the regulator scissor channel to the door panel and then take out the screw and bolt heads from the keyhole holes. First loosen the bolt holding the regulator support brace to the door panel and then loosen the bolts that secure the regulator to the door panel. To get rid of the regulator, pull it straight back and turn the front section of the roller channel through the hole cut into the door panel. To fix the strike plate, slip the roller channel into the door's access hole, then put the bolt and screw through the keyhole slots. Secure the regulator to the door panel by tightening the bolts and afterward screw in the bolt holding the regulator support brace and the screw for the regulator scissor channel. Attach the power window motor wire connector, bring the door glass onto the regulator channel, adjust it and operate the glass to confirm it works. After that, put back the pull cup support bracket, water shield, door trim panel and flag cover.