How to Correctly Install a Drive Shaft on Chrysler Aspen?

To place in the drive/propeller shaft, put the slip yoke onto the automatic transmission/transfer case output shaft, making sure that the marks are lined up. After that, bring the reference marks on the propeller shaft flange into contact with those on the pinion flange. Place and tighten the new flange bolts to 115 Nm (85 ft. lbs.) and include a Loctite patch with these bolts. If you can't find new bolts, make sure the old ones are clean and coated with Mopar Lock & Seal Adhesive or a similar product. A driveline vibration may occur if these instructions are not followed.

How to Remove the Drive Shaft on Chrysler Aspen?

Always start the removal of the propeller shaft by parking the car in neutral and mounting it on a hoist. Add a reference line to the space between these two flanges. After that, use a wrench to remove the bolts holding the pinion flange to the propeller shaft flange. Take the propeller shaft off the transmission/transfer case output shaft and write on both parts for where they will go back. Then, remove the propeller shaft while preventing actions that might cause driveline vibration.

OEM Chrysler Aspen Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Drive Shafts found

View related parts
Chrysler Aspen Drive Shaft Part Number: 52853039AF
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 52853039AE, 52853039AC, 52853039AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Drive Shaft Part Number: 52853017AF
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 52853017AC, 52853017AE, 52853017AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Drive Shaft Part Number: 52123197AB
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 52123197AA, 52853038AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Drive Shaft Part Number: 52123196AB
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 52853019AB, 52123196AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Drive Shaft Part Number: 52853018AF
Product Specifications
- Other Name: Shaft - Drive; Driveshaft
- Replaces: 52853018AC, 52853018AD, 52853018AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

Chrysler Aspen Drive Shaft

Choose OEM Drive Shaft that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Drive Shaft follows strict manufacturing steps to lock in quality and fit. If your Chrysler Aspen matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Aspen parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Aspen Drive Shaft is an essential part familiar for its quality and efficiency that assists in the performance of Chrysler Aspen vehicles. The Drive Shaft is an assembly whose principal function is to convey mechanical power and torque from the engine to the drive wheels to enable the smooth running of the Aspen under different driving conditions. It has a low specific mass that reduces its rotationalmass moment while hugely offering the torsion and sheer stress that form the basic the safety andperfromance gauge. The Chrysler Aspen Drive Shaft is used in different models of Chrysler's Aspen where the various models provide the car with four-wheel and all-wheel drive systems differing in one piece and two pieces designs. It improves the vehicle total performance since the power is readily distributed between the front and rear axles. As for the Chrysler Aspen Drive Shaft, it has the universal or splined join that allows for such alignment difference, which also adds to the dependability of the part. However, the Drive Shaft is not only functional but also has an aesthetic component in conjunction with driving; it serves to deliver power smoothly which is ideal for superior engines of the Aspen especially the 5.7L Hemi V8. That is why the Chrysler Aspen equipped with strong Drive Shaft, has a large carrying capacity and a well thought out interior, can be considered as the car of the automotive market that offers drivers a combination of comfort, powerfulFine acceleration, and protection from accidents that is difficult to find.

Chrysler Aspen Drive Shaft Parts and Q&A

Drive Shaft
52123196AB
Q: How to Correctly Install a Drive Shaft on Chrysler Aspen?
A:
To place in the drive/propeller shaft, put the slip yoke onto the automatic transmission/transfer case output shaft, making sure that the marks are lined up. After that, bring the reference marks on the propeller shaft flange into contact with those on the pinion flange. Place and tighten the new flange bolts to 115 Nm (85 ft. lbs.) and include a Loctite patch with these bolts. If you can't find new bolts, make sure the old ones are clean and coated with Mopar Lock & Seal Adhesive or a similar product. A driveline vibration may occur if these instructions are not followed.
Drive Shaft
52853017AF
Q: How to Remove the Drive Shaft on Chrysler Aspen?
A:
Always start the removal of the propeller shaft by parking the car in neutral and mounting it on a hoist. Add a reference line to the space between these two flanges. After that, use a wrench to remove the bolts holding the pinion flange to the propeller shaft flange. Take the propeller shaft off the transmission/transfer case output shaft and write on both parts for where they will go back. Then, remove the propeller shaft while preventing actions that might cause driveline vibration.