OEM Chrysler Aspen Seat Heater

Chrysler Aspen Seat Heater Parts and Q&A

• Seat Cushion Heater, Lower
  5000013AB
  Q: How to Install a Seat Heater and Ensure Proper Functionality of the Heated Rear Seat System on Chrysler Aspen?

  A:

  Remove the backing of the replacement heating element and attach it right on top of the heating element already built into the chair. Plug in the heating connection from the Seat Cushion and attach the small plastic clip to the bottom of the dash in the rear center. Then, fit the central floor console in the back and connect the battery's negative cable. Make sure the heated rear seat system is working properly and next, fit the correct seat cushion cover, securing any iPhone screen repair extra wire under the foam and below the rear flap of the seat's trim cover. Next, take off the backing from the heating replacement and mount it on top of the existing heating element on the seat back. Park the second row seat back heating element wires and fasten the Basalt routing clip. After connecting the negative battery cable to the heated rear seat system, test the operation of that system and make sure to fit the correct seat back cover and the seat wire harness is correctly routed with any wire excess tucked away neatly.
• Element
  68019020AA
  Q: How to Safely Remove and Service a Seat Heater Without Causing Damage on Chrysler Aspen?

  A:

  Always begin the servicing of the seat heater by separating and isolating the battery negative cable. For that part, remove the Seat Cushion cover and the rear center floor console. Take apart the connection for the heat element in the second row, then remove the clip fastening the harness from the console bracket. Cut the wires from the inoperative heating element so they end at the edge of the main heating element. When moving on to the seat back, turn off the negative battery cable and remove the seat back trim cover along with the inner second row seat cushion to bracket cover. Detach the electric connector from the back of the unresponsive heated seat and then remove the harness clip. After that, identify the wires from the broken heating element and cut them as close as possible to the edge of the original element.