How to Install a Serpentine Belt on 3.7L/4.7L Engines on Chrysler Aspen?

In 3.7L/4.7L engines, check that all of the pulleys are not damaged before fitting the serpentine accessory drive belt. Route the belt around all pulleys except the idler pulley 5. Rotate the tensioner arm until it contacts its stop position and route the belt around the idler 5. Slowly let the tensioner rotate into the belt and check that the belt is seated onto all the pulleys. Following the installation of the accessory drive belt, check the belt wear indicator. For 4.7L engines, the dimension "A" measured from the tang to the housing stop must not exceed 24mm (0.94"). Replace the accessory drive belt if this measurement is acceptable.

How to Remove and Replace the Serpentine Belt on a 3.7L/4.7L Engine on Chrysler Aspen?

To disconnect the negative battery cable remove and replace the serpentine accessory drive belt on a 3.7L/4.7L engine. After that, turn the belt tensioner 6 until it hits the stop. After that, remove accessory drive belt 2. Then slowly rotate tensioner 6 back into its free arm position, making sure that the tensioner arm does not snap back as this will severely damage the tensioner.

OEM Chrysler Aspen Serpentine Belt

Serpentine Drive Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Serpentine Belts found

View related parts
Chrysler Aspen Serpentine Belt Part Number: 4593852AB
$42.92 MSRP: $61.70
You Save: $18.78 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
- Replaces: 4593852AA, 4593665AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Chrysler Aspen | Limited | 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Serpentine Belt Part Number: 53032805AB
$74.51 MSRP: $104.00
You Save: $29.49 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Aspen | Limited | 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Serpentine Belt Part Number: 53032817AB
$67.87 MSRP: $89.75
You Save: $21.88 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Replaces: 53032817AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007 Chrysler Aspen | Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Chrysler Aspen Belt - Serpentine Part Number: 68027636AB
$52.90 MSRP: $71.70
You Save: $18.80 (27%)
ADD TO CART
Product Specifications
- Other Name: BELT-SERPENTINE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chrysler Aspen | Limited | 4.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
Chrysler Aspen Serpentine Belt Part Number: 5192067AC
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Chrysler Aspen | Limited Hybrid | 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV)

Chrysler Aspen Serpentine Belt

Choose OEM Serpentine Belt that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Serpentine Belt follows strict manufacturing steps to lock in quality and fit. If your Chrysler Aspen matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Aspen parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Aspen Serpentine Belt Parts and Q&A

Belt - Serpentine
68027636AB
Q:
How to Install a Serpentine Belt on 3.7L/4.7L Engines on Chrysler Aspen?
A:
In 3.7L/4.7L engines, check that all of the pulleys are not damaged before fitting the serpentine accessory drive belt. Route the belt around all pulleys except the idler pulley 5. Rotate the tensioner arm until it contacts its stop position and route the belt around the idler 5. Slowly let the tensioner rotate into the belt and check that the belt is seated onto all the pulleys. Following the installation of the accessory drive belt, check the belt wear indicator. For 4.7L engines, the dimension "A" measured from the tang to the housing stop must not exceed 24mm (0.94"). Replace the accessory drive belt if this measurement is acceptable.
Serpentine Belt
4593852AB
Q:
How to Remove and Replace the Serpentine Belt on a 3.7L/4.7L Engine on Chrysler Aspen?
A:
To disconnect the negative battery cable remove and replace the serpentine accessory drive belt on a 3.7L/4.7L engine. After that, turn the Belt Tensioner 6 until it hits the stop. After that, remove accessory drive belt 2. Then slowly rotate tensioner 6 back into its free arm position, making sure that the tensioner arm does not snap back as this will severely damage the tensioner.