Are the left- and right-side Torsion Bars interchangeable, and how to install them on Chrysler Aspen?

The left and right side torsion bars are not interchangeable, as they are identified and stamped R or L for right or left, and can be installed with either end facing forward. Begin by inserting the torsion bar ends into the anchor and suspension arm, then position the anchor in the crossmember frame. Use loader/unloader tool 8686 to connect the anchor to the crossmember and increase the tension on the anchor to load the torsion bar. Next, install the adjustment bolt and adjuster nut, turning the adjustment bolt clockwise the recorded amount of turns. Afterward, remove the loader/unloader tool 8686 from the torsion bar crossmember. Install the transfer case skid plate, lower the vehicle, and adjust the front suspension height. Finally, perform a wheel alignment.

How can the front Torsion Bar be removed on Chrysler Aspen?

To remove the front torsion bar, first raise and support the vehicle with the front suspension hanging. Note that left and right side torsion bars are not interchangeable. They are stamped "R" or "L" for this purpose. Start by removing the transfer case skid plate, keeping track of the count and number of turns to put it back. Make a note of the adjustment bolt setting, then install the loader/unloader tool 8686 on the anchor arm and the cross member. Tighten the loader/unloader tool 8686 until the load separates from the adjustment bolt and the adjuster nut. To remove the adjustment bolt and nut, turn the adjusting bolt in an anticlockwise direction. Finally, remove the loader/unloader tool 8686 so the torsion bar unloads.

OEM Chrysler Aspen Torsion Bar

Suspension Torsion Bar

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Torsion Bars found

View related parts
Chrysler Aspen Torsion Bar, Front Part Number: 52113160AA
$175.87 MSRP: $179.00
You Save: $3.13 (2%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Torsion; Torsion Bar, Front; Bar Torsion
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Torsion Bar, Front Part Number: 52855406AA
$180.80
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Torsion; Torsion Bar, Front; Bar Torsion
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Torsion Bar Anchor End, Front Driver Side Part Number: 52005145AB
$72.84 MSRP: $91.85
You Save: $19.01 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Torsion Bar; Torsion Bar Adjusting Arm, Front Left; Torsion Bar Mount; Anchor; Anchor Torsion Bar
- Position: Front Driver Side
- Replaces: 52005145AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Torsion Bar, Front Part Number: 52855407AA
Product Specifications
- Other Name: Spring - Torsion; Torsion Bar, Front; Bar Torsion
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Torsion Bar, Front Part Number: 52113161AA
Product Specifications
- Other Name: Spring - Torsion; Torsion Bar, Front; Bar Torsion
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Torsion Bar Anchor End, Front Passenger Side Part Number: 52005144AB
Product Specifications
- Other Name: Bracket - Torsion Bar; Torsion Bar Adjusting Arm, Front Right; Torsion Bar Mount; Anchor; Anchor Torsion Bar
- Position: Front Passenger Side
- Replaces: 52005144AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Torsion Bar, Front Part Number: 52113305AA
Product Specifications
- Other Name: Spring - Torsion; Torsion Bar, Front; Bar Torsion
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Torsion Bar, Front Part Number: 52113302AA
Product Specifications
- Other Name: Spring - Torsion; Torsion Bar, Front; Bar Torsion
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chrysler Aspen | Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Torsion Bar, Front Part Number: 52855909AB
Product Specifications
- Other Name: Spring - Torsion; Torsion Bar, Front; Bar Torsion
- Position: Front
- Replaces: 52855909AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Chrysler Aspen | Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
Chrysler Aspen Torsion Bar, Front Part Number: 52855908AB
Product Specifications
- Other Name: Spring - Torsion; Torsion Bar, Front; Bar Torsion
- Position: Front
- Replaces: 52855908AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009 Chrysler Aspen | Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

Chrysler Aspen Torsion Bar

Choose OEM Torsion Bar that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Torsion Bar follows strict manufacturing steps to lock in quality and fit. If your Chrysler Aspen matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Aspen parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Aspen Torsion Bar Parts and Q&A

Torsion Bar, Front
52855407AA
Q:
Are the left- and right-side Torsion Bars interchangeable, and how to install them on Chrysler Aspen?
A:
The left and right side torsion bars are not interchangeable, as they are identified and stamped R or L for right or left, and can be installed with either end facing forward. Begin by inserting the torsion bar ends into the anchor and suspension arm, then position the anchor in the crossmember frame. Use loader/unloader tool 8686 to connect the anchor to the crossmember and increase the tension on the anchor to load the torsion bar. Next, install the adjustment bolt and adjuster nut, turning the adjustment bolt clockwise the recorded amount of turns. Afterward, remove the loader/unloader tool 8686 from the torsion bar crossmember. Install the transfer case skid plate, lower the vehicle, and adjust the front suspension height. Finally, perform a wheel alignment.
Torsion Bar, Front
52113160AA
Q:
How can the front Torsion Bar be removed on Chrysler Aspen?
A:
To remove the front torsion bar, first raise and support the vehicle with the front suspension hanging. Note that left and right side torsion bars are not interchangeable. They are stamped "R" or "L" for this purpose. Start by removing the transfer case skid plate, keeping track of the count and number of turns to put it back. Make a note of the adjustment bolt setting, then install the loader/unloader tool 8686 on the anchor arm and the cross member. Tighten the loader/unloader tool 8686 until the load separates from the adjustment bolt and the adjuster nut. To remove the adjustment bolt and nut, turn the adjusting bolt in an anticlockwise direction. Finally, remove the loader/unloader tool 8686 so the torsion bar unloads.