How to Ensure Proper Maintenance and Installation of a Drive Belt in a Poly-V Belt System on Chrysler Cirrus?

Clear any particles from the belt pulleys, then make sure they do not contain grease, oil or coolants. Once the belt becomes worn, has damaged cords or has severe glazing, it needs to be swapped out. Vertical cracks across the ribbed side of the Poly-V Belt are considered acceptable, unlike straight cracks. No belt dressing or restorers should be applied to Poly-V Belts.

How to Service and Repair a Drive Belt System on Chrysler Cirrus?

For service or repair of the accessory drive belt system, begin by freeing the T-Bolt and pivot bolt to access the belt, replace it and use the Belt Tension Chart to check that the belt is correctly secured. Once the adjustment is done, turn the T-Bolt locking nut and pivot bolt to 54 Nm (40 ft. lbs.). At the top of the car, undo the pivot bolt and under it, undo the locking bolts on the steering column. Connect the belt and use a 1/2 in. breaker bar in the adjusting bracket, keeping the numbers from the Belt Tension Chart in mind. Finish by turning the locking bolt to 54 Nm (40 ft. lbs.) and the other locking bolt to 28 Nm (250 in. lbs.), after which tighten the pivot bolt to 54 Nm (40 ft. lbs.).

OEM Chrysler Cirrus Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Drive Belts found

View related parts
Chrysler Cirrus Serpentine Belt Part Number: 4892479AB
$48.28 MSRP: $70.90
You Save: $22.62 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Accessory Drive; Drive Belt; Alternator Belt; Belt; Belt Accessory Drive
- Replaces: 4573013AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Cirrus | LX
- 1997 Chrysler Cirrus
View related parts
Chrysler Cirrus Serpentine Belt Part Number: 4663199AC
$34.19 MSRP: $59.45
You Save: $25.26 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Accessory Drive; Drive Belt
- Replaces: 4663199, 4663199AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chrysler Cirrus | 2.0L L4, 2.4L L4, 2.5L V6
View related parts
Chrysler Cirrus Serpentine Belt Part Number: 4573727AB
Product Specifications
- Other Name: Belt - Accessory Drive; Serpentine Belt Drive Kit; Drive Belt; V-Belt
- Replaces: 4573727
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chrysler Cirrus | LX, LXi | 2.0L L4, 2.4L L4, 2.5L V6, 6 Cyl 2.5 L GAS
View related parts
Chrysler Cirrus Serpentine Belt Part Number: 4668324AC
Product Specifications
- Other Name: Belt - Accessory Drive; Serpentine Belt Drive Kit; Drive Belt; V-Belt
- Replaces: 4668324AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2000 Chrysler Cirrus | LX, LXi | 6 Cyl 2.5 L GAS
View related parts
Chrysler Cirrus Serpentine Belt Part Number: 4573974AG
Product Specifications
- Other Name: Belt - Accessory Drive; Serpentine Belt Drive Kit; Drive Belt; V-Belt
- Replaces: 4573974AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Cirrus | LX

Chrysler Cirrus Drive Belt

Choose OEM Drive Belt that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Drive Belt follows strict manufacturing steps to lock in quality and fit. If your Chrysler Cirrus matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Cirrus parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Drive Belt in Chrysler Cirrus automobiles is used to link the engine to other machines, which include the alternator as well as the A/C compressor. Usually a serpentine belt is used and it passes around these parts and connects them to the crankshaft pulley. This design also facilitates power transmission, meaning that most Drive Belts should be good for about 100000 miles however they can be replaced earlier if they are faulty. As it shall be seen, Chrysler Cirrus has over the years used the V-belts as well as the multi-groove belts and each has its merits. V-belts are special for their strong traction and good wearing resistance, while multi-groove belts for flexibility and improved effect. Different types of Drive Belt have varied levels of performance and recurrent necessity of change, hence the Chrysler Cirrus owners should consider their status serious enough that may cause severe damage to both the engine and other parts.

Chrysler Cirrus Drive Belt Parts and Q&A

Serpentine Belt
4663199AC
Q: How to Ensure Proper Maintenance and Installation of a Drive Belt in a Poly-V Belt System on Chrysler Cirrus?
A:
Clear any particles from the belt pulleys, then make sure they do not contain grease, oil or coolants. Once the belt becomes worn, has damaged cords or has severe glazing, it needs to be swapped out. Vertical cracks across the ribbed side of the Poly-V Belt are considered acceptable, unlike straight cracks. No belt dressing or restorers should be applied to Poly-V Belts.
Serpentine Belt
4892479AB
Q: How to Service and Repair a Drive Belt System on Chrysler Cirrus?
A:
For service or repair of the accessory drive belt system, begin by freeing the T-Bolt and pivot bolt to access the belt, replace it and use the Belt Tension Chart to check that the belt is correctly secured. Once the adjustment is done, turn the T-Bolt locking nut and pivot bolt to 54 Nm (40 ft. lbs.). At the top of the car, undo the pivot bolt and under it, undo the locking bolts on the steering column. Connect the belt and use a 1/2 in. breaker bar in the adjusting bracket, keeping the numbers from the Belt Tension Chart in mind. Finish by turning the locking bolt to 54 Nm (40 ft. lbs.) and the other locking bolt to 28 Nm (250 in. lbs.), after which tighten the pivot bolt to 54 Nm (40 ft. lbs.).