How to Service and Repair a Front Door Hinge on Chrysler Concorde?

Before starting, mark where the hinge is located on the hinge pillar. First remove the bolt and nut connecting the hinge to the front door, next take out the hinge bolts and finally free the hinge from the vehicle. First, take out the door hinge if you have a double ended stud mechanism. Double up the nut on the stud and take it out of the door frame; if it's broken, use locking pliers at the shoulder to back it out. For installation, put the hinge bracket on the car and tighten the bolt and nut after it's in place, so the bolt reaches a torque of 28 N.m (250 in.lbs.). After that, connect the hinge to the front door with the included bolt and nut, Allowing for a torque of 28 N.m (250 in.lbs.). If you have changed the double ended stud, be sure to tighten it to 14 N.m (120 in.lbs.). When the door is installed, inspect it to ensure it is both aligned and working properly; improve alignment as needed. If using a double ended stud, make sure replacement studs have been coated in thread sealer. If you are using the original studs, apply Mopar® Lock and Seal Adhesive or something similar to the threads before installing. Hold the double ended stud against the frame, tighten it to 14 N.m (120 in.lbs.) and then mount the hinge and tighten the hinge bolt and nut to 28 N.m (250 in.lbs.). Confirm the door operates well and makes no strange sounds and if it does, readjust it.

How to Service and Repair a Rear Door Hinge on Chrysler Concorde?

To service and repair the rear door hinge mark fist the outline of the hinge on the B-pillar and door end frame. Remove the nut and bolt that holds hinge to B pillar then remove the nut and bolt that attach hinge to door end frame. Once the hinge has been removed from the door realign the new hinge to the marks on the end of the door frame and position it in place. Install all the nuts and bolts which attach the hinge to the door end frame, aligning the hinge to the marks on the B pillar then finally installing all the nuts and bolts which attach the hinge to the B pillar. Finally, check the door alignment and operation and make any adjustments.

OEM Chrysler Concorde Door Hinge

Interior Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Door Hinges found

View related parts
Chrysler Concorde Hinge, Lower Part Number: 4756269
$3.21 MSRP: $4.07
You Save: $0.86 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Front Door Lower Door Half; Hinge Front Door Half With Bushings; Hinge, Door Half
- Position: Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1997 Chrysler Concorde | Base, LX, LXi | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Lower Hinge, Rear Passenger Side Part Number: 4574436
$6.21 MSRP: $7.87
You Save: $1.66 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Rear Door Lower; Door Hinge, Rear Right Lower; Hinge Rear Door Lower; Door Hinge
- Position: Rear Lower Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chrysler Concorde | LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Hinge, Lower Part Number: 4756268
Product Specifications
- Other Name: Hinge Front Door Lower Door Half; Hinge Front Door Half With Bushings; Hinge, Door Half
- Position: Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1997 Chrysler Concorde | Base, LX, LXi | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Upper Hinge, Front Passenger Side Part Number: 4574274AB
Product Specifications
- Other Name: Hinge - Front Door Upper; Door Hinge, Front Right Upper; Hinge Front Door Upper; Door Hinge
- Position: Front Upper Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chrysler Concorde | LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Lower Hinge, Front Passenger Side Part Number: 4574300AB
Product Specifications
- Other Name: Hinge - Front Door Lower; Door Hinge, Front Right Lower; Hinge Front Door Lower; Door Hinge
- Position: Front Lower Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chrysler Concorde | LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Hinge, Rear Lower Part Number: 4756278
Product Specifications
- Other Name: Hinge Ft Lower Rear Up Body Ha; Hinge Front Door Body Half; Hinge, Body Half
- Position: Rear Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chrysler Concorde | Base, LX, LXi | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Hinge Part Number: 4756265
Product Specifications
- Other Name: Hinge Front Door Upper Door Half; Door Hinge; Hinge Front Door Door Half With Bushings; Hinge, Door Half
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1997 Chrysler Concorde | Base, LX, LXi | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Hinge Part Number: 4696319AB
Product Specifications
- Other Name: Hinge Deck Lid; Door Hinge; Lock
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1997 Chrysler Concorde | Base, LX, LXi | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Lower Hinge, Rear Driver Side Part Number: 4574437
Product Specifications
- Other Name: Hinge - Rear Door Lower; Door Hinge, Rear Left Lower; Hinge Rear Door Lower; Door Hinge
- Position: Rear Lower Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chrysler Concorde | LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Upper Hinge, Rear Driver Side Part Number: 4574429
Product Specifications
- Other Name: Hinge - Rear Door Upper; Door Hinge, Rear Left Upper; Hinge Rear Door Upper; Door Hinge
- Position: Rear Upper Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chrysler Concorde | LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Upper Hinge, Rear Passenger Side Part Number: 4574428
Product Specifications
- Other Name: Hinge - Rear Door Upper; Door Hinge, Rear Right Upper; Hinge Rear Door Upper; Door Hinge
- Position: Rear Upper Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chrysler Concorde | LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Upper Hinge, Front Driver Side Part Number: 4574275AB
Product Specifications
- Other Name: Hinge - Front Door Upper; Door Hinge, Front Left Upper; Hinge Front Door Upper; Door Hinge
- Position: Front Upper Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chrysler Concorde | LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Hinge Part Number: 4756980
Product Specifications
- Other Name: Hinge - Front Upper Body Half Right; Door Hinge; Hinge Front Door Body Half
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chrysler Concorde | Base, LX, LXi | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Lower Hinge, Front Driver Side Part Number: 4574301AB
Product Specifications
- Other Name: Hinge - Front Door Lower; Door Hinge, Front Left Lower; Hinge Front Door Lower; Door Hinge
- Position: Front Lower Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chrysler Concorde | LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Hinge, Rear Passenger Side Part Number: 4575144AG
Product Specifications
- Other Name: Hinge - Deck Lid; Deck Lid Hinge, Rear Right; Door Hinge
- Position: Rear Passenger Side
- Replaces: 4575144AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chrysler Concorde | LX, LXi, Limited | 2.7L V6, 3.2L V6, 3.5L V6, 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Hinge, Rear Driver Side Part Number: 4575145AG
Product Specifications
- Other Name: Hinge - Deck Lid; Deck Lid Hinge, Rear Left; Door Hinge
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chrysler Concorde | LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Hinge Part Number: 4696318AB
Product Specifications
- Other Name: Hinge - Deck Lid; Door Hinge; Lock
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1997 Chrysler Concorde | Base, LX, LXi | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

Chrysler Concorde Door Hinge

Choose OEM Door Hinge that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Door Hinge follows strict manufacturing steps to lock in quality and fit. If your Chrysler Concorde matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Concorde parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Concorde Door Hinge is every bit an essential ingredient that speaks volume about the Chrysler Concorde, which is a full sized sedan and much appreciated due to excellent engineering. Responsibility for successfully connecting the door to the car frame while allowing for smooth opening and closing for passengers' access, the Chrysler Concorde Door Hinge was made for that purpose. These are made from steel material and coated to prevent corrosion These door hinges offer long- lasting solution to Chrysler concorde making it efficient and safe to use. The fitment guarantee for the array of Concorde models implies that owners can preserve the quality of their vehicles, because rusty hinges negatively affect the stability that contributes to door sagging and misalignment of the entire car structure. The Chrysler Concorde Door Hinge involves new designs such as bolted design for easier replacement of the hinge and modern door check straps that increases its freedom of movement but not vulnerable to harm. This attention to the detailing not only accentuates the users pleasure when operating the car but also helps in enhancing the safety of the car since door functions well. These door hinges are equally reliable and enhance comfort and performance making Chrysler Concorde one of the most sought after vehicle in the market. The one responsible for the car's excellent performance is Chrysler Concorde Door Hinge, which has heavy duty construction and aesthetically appealing look, proving that Chrysler Concorde is one of the best and stylish cars that a driver can own.

Chrysler Concorde Door Hinge Parts and Q&A

Lower Hinge, Front Passenger Side
4574300AB
Q: How to Service and Repair a Front Door Hinge on Chrysler Concorde?
A:
Before starting, mark where the hinge is located on the hinge pillar. First remove the bolt and nut connecting the hinge to the front door, next take out the hinge bolts and finally free the hinge from the vehicle. First, take out the door hinge if you have a double ended stud mechanism. Double up the nut on the stud and take it out of the door frame; if it's broken, use locking pliers at the shoulder to back it out. For installation, put the hinge bracket on the car and tighten the bolt and nut after it's in place, so the bolt reaches a torque of 28 N.m (250 in.lbs.). After that, connect the hinge to the front door with the included bolt and nut, Allowing for a torque of 28 N.m (250 in.lbs.). If you have changed the double ended stud, be sure to tighten it to 14 N.m (120 in.lbs.). When the door is installed, inspect it to ensure it is both aligned and working properly; improve alignment as needed. If using a double ended stud, make sure replacement studs have been coated in thread sealer. If you are using the original studs, apply Mopar® Lock and Seal Adhesive or something similar to the threads before installing. Hold the double ended stud against the frame, tighten it to 14 N.m (120 in.lbs.) and then mount the hinge and tighten the hinge bolt and nut to 28 N.m (250 in.lbs.). Confirm the door operates well and makes no strange sounds and if it does, readjust it.
Upper Hinge, Rear Driver Side
4574429
Q: How to Service and Repair a Rear Door Hinge on Chrysler Concorde?
A:
To service and repair the rear door hinge mark fist the outline of the hinge on the B-pillar and door end frame. Remove the nut and bolt that holds hinge to B pillar then remove the nut and bolt that attach hinge to door end frame. Once the hinge has been removed from the door realign the new hinge to the marks on the end of the door frame and position it in place. Install all the nuts and bolts which attach the hinge to the door end frame, aligning the hinge to the marks on the B pillar then finally installing all the nuts and bolts which attach the hinge to the B pillar. Finally, check the door alignment and operation and make any adjustments.