How to Service and Repair Exterior Emblems on Chrysler Concorde?

You should first note the points you will use for reference just before taking out the exterior name plates. For double-sided tape, pass the heat gun around the emblem in a slow, careful circle to break the bond and then lift and remove the emblem using a nonmetallic pry tool. Clean up any leftover adhesive or tape from the panel by using a typical rubber cement removal product. When removing the badge or tape glue with heat, again mark fixed spots, heat and use your fingernail to peel away with ongoing heat. Gently remove any sticky marks left by the adhesive with a general adhesive remover. For panels attached with double-sided tape, rub isopropyl alcohol on the panel, place the badge according to the marks shown, press everything onto the surface and wash away all reference marks. To install adhesive, clean the panel with isopropyl alcohol, take off the paper carrier, place the badge or tape so it lines up with your reference points or nearby panel, push it on securely using a plastic spreader, remove the top covering and get rid of any reference marks.

OEM Chrysler Concorde Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Emblems found

View related parts
Chrysler Concorde Emblem, Rear Part Number: 4805065AB
$55.30 MSRP: $63.45
You Save: $8.15 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ornament - Decklid; Deck Lid Emblem, Rear; Nameplate; Emblem Decklid Winged Victory
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chrysler Concorde | LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Medallion, Front Part Number: 5288940AA
$33.77 MSRP: $71.35
You Save: $37.58 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ornament - Fascia; Bumper Cover Emblem, Front; Medallion Fascia Wing; Medallion Fascia
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2000 Chrysler Concorde | LX, LXi | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS
View related parts
Chrysler Concorde Nameplate, Rear Part Number: 4805880AB
$39.66 MSRP: $62.85
You Save: $23.19 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nameplate, Concorde Limited; Deck Lid Emblem, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2004 Chrysler Concorde | LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Nameplate, Rear Part Number: 4805878AB
$46.87 MSRP: $53.80
You Save: $6.93 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nameplate, Concorde Lx; Deck Lid Emblem, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Chrysler Concorde | LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Nameplate, Rear Part Number: 4805879AB
Product Specifications
- Other Name: Nameplate, Concorde Lxi; Deck Lid Emblem, Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Chrysler Concorde | LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Medallion Part Number: 4630279
Product Specifications
- Other Name: Emblem; Emblem, Fascia, Pentastar; Medallion, Fascia
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1994 Chrysler Concorde | Base | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Emblem, Front Part Number: 5011615AA
Product Specifications
- Other Name: Ornament - Winged Medallion; Bumper Cover Emblem, Front; Grille Emblem, Front; Medallion; Plinth Winged Medallion Serviced In Grille Assembly; With Medallion; Plinth Winged Medallion
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chrysler Concorde | LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS

Chrysler Concorde Emblem

Choose OEM Emblem that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Emblem follows strict manufacturing steps to lock in quality and fit. If your Chrysler Concorde matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Concorde parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Concorde emblem stands as a fundamental indicator of brand reliability and performance which distinguishes the vehicle by its manufacturer. The emblem adds visual recognition to the Chrysler Concorde vehicle production line between 1993 and 2004 in a hood decoration or hood and trunk flat design form. The Chrysler LH platform underpins the Concorde which provides an outstanding combination of design excellence along with safe operation features. The Chrysler Concorde emblem serves as a vital brand identifier for all base LX, LXi and Limited trim versions of the vehicle. Design engineers integrated the Chrysler Concorde emblem to depict both style and innovation through its cab-forward architecture which creates a sloping hood as well as advanced aerodynamic capability. The Chrysler Concorde emblem stands as a quality marker because it includes integrated side impact protection together with double-shear suspension mounts which improve vehicle performance and safety. Customers can acquire replacement emblems for their vehicles at reasonable prices that range from $10 to $200 so the emblem serves as an affordable necessity to preserve vehicle identity. The the automaker model part distinguishes itself among automobile emblems through its representation of enduring reliability together with top performance and forward-thinking design elements which attract modern enthusiasts as well as current drivers.

Chrysler Concorde Emblem Parts and Q&A

Emblem, Rear
4805065AB
Q: How to Service and Repair Exterior Emblems on Chrysler Concorde?
A:
You should first note the points you will use for reference just before taking out the exterior name plates. For double-sided tape, pass the heat gun around the emblem in a slow, careful circle to break the bond and then lift and remove the emblem using a nonmetallic pry tool. Clean up any leftover adhesive or tape from the panel by using a typical rubber cement removal product. When removing the badge or tape glue with heat, again mark fixed spots, heat and use your fingernail to peel away with ongoing heat. Gently remove any sticky marks left by the adhesive with a general adhesive remover. For panels attached with double-sided tape, rub isopropyl alcohol on the panel, place the badge according to the marks shown, press everything onto the surface and wash away all reference marks. To install adhesive, clean the panel with isopropyl alcohol, take off the paper carrier, place the badge or tape so it lines up with your reference points or nearby panel, push it on securely using a plastic spreader, remove the top covering and get rid of any reference marks.