How is the tension strut removed and installed with the Radius Arm on Chrysler Concorde?

The tension strut is removed from the vehicle along with the lower control arm, after which they are separated. For installation, the tension strut is attached to the lower control arm, and then both components are installed together.

How to service the Radius Arm on Chrysler Concorde?

To service the radius arm, remove the tension strut with the lower control arm as an assembly from the car, then separate them. Remove the tension strut cradle bushing halve and sleeve from the tension strut; remove the remaining tension strut cradle bushing halve from the engine cradle assembly. To install, attach the tension strut to the lower control arm and install the two together. Start with inserting the tension strut cradle isolator bushing halve into the front face of the cradle mounting hole, until it is squarely located against the cradle. Next, push the isolator bushing halve onto the tension strut until it presses against the retaining washer. Eventually, an assembly of the tension strut and the lower control arm is reinstalled back in the car.

OEM Chrysler Concorde Radius Arm

Front Suspension Radius Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Radius Arms found

View related parts
Chrysler Concorde Trailing Arm Part Number: 4582534
Product Specifications
- Other Name: Link - Trailing; Link, Trailing Body To Knuckle; Arm Trailing
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1997 Chrysler Concorde | Base, LX, LXi | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Trailing Arm, Rear Part Number: 4782275AB
Product Specifications
- Other Name: Link - Trailing; Suspension Trailing Arm, Rear; Link Trailing; Suspension Trailing Arm
- Position: Rear
- Replaces: 4782275AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chrysler Concorde | Limited, LX, LXi | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Trailing Arm, Rear Part Number: 4782274AB
Product Specifications
- Other Name: Link - Trailing; Suspension Trailing Arm, Rear; Link Trailing; Suspension Trailing Arm
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chrysler Concorde | LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS

Chrysler Concorde Radius Arm

Choose OEM Radius Arm that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Radius Arm follows strict manufacturing steps to lock in quality and fit. If your Chrysler Concorde matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Concorde parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Concorde Radius Arm Parts and Q&A

Trailing Arm, Rear
4782275AB
Q:
How is the tension strut removed and installed with the Radius Arm on Chrysler Concorde?
A:
The tension strut is removed from the vehicle along with the lower control arm, after which they are separated. For installation, the tension strut is attached to the lower control arm, and then both components are installed together.
Trailing Arm, Rear
4782274AB
Q:
How to service the Radius Arm on Chrysler Concorde?
A:
To service the radius arm, remove the tension strut with the lower control arm as an assembly from the car, then separate them. Remove the tension strut cradle bushing halve and sleeve from the tension strut; remove the remaining tension strut cradle bushing halve from the engine cradle assembly. To install, attach the tension strut to the lower control arm and install the two together. Start with inserting the tension strut cradle isolator bushing halve into the front face of the cradle mounting hole, until it is squarely located against the cradle. Next, push the isolator bushing halve onto the tension strut until it presses against the retaining washer. Eventually, an assembly of the tension strut and the lower control arm is reinstalled back in the car.