How to Service and Repair a Sway Bar Bushing on Chrysler Concorde?

Before working on the front sway bar bushing, first raise the car using jack stands or a frame contact hoist. Before removing the next pieces, loosen the 2 bolts that hold every sway bar bushing retainer and bushing to the cradle assembly and take out the sway bar isolator bushing retainers from the isolator bushings. Check the retainers and bushings; if any of them are broken or distorted, remove the bushings, open the slit in the new bushings and slide them around the sway bar so the slit is toward the front of the car. Install the bushings onto the sway bar, with their slits at the front and the flat side down and then put the isolator bushing retainers back onto them. It is important to place the sway bar so its lower end is exactly midway on the cradle to avoid contact with other suspension parts. Place each sway bar bushing retainer into its mounting hole in the cradle assembly, attach it using the bolts to the assembly and secure them by torquing them to 61 Nm (45 ft. lbs.). Set the vehicle down onto the ground at the end.

OEM Chrysler Concorde Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Sway Bar Bushings found

View related parts
Chrysler Concorde Stabilizer Link Retainer Part Number: 4582820
$4.97 MSRP: $6.30
You Save: $1.33 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Sway Eliminator Link; Suspension Stabilizer Bar Link; Retainer; Isolator, Sway Eliminator Link; Bushing Stabilizer Bar
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997 Chrysler Concorde | LX, LXi | 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Stabilizer Bar Bushing Part Number: 4695838
$14.57 MSRP: $18.75
You Save: $4.18 (23%)
ADD TO CART
Product Specifications
- Other Name: Bushing - Front Suspension Sway Eliminator; Shaft, Sway Eliminating (See Note); Cushion Sway Eliminator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1997 Chrysler Concorde | Base, LX, LXi | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Stabilizer Bar Bushing, Rear Part Number: 4581161
Product Specifications
- Other Name: Bushing - Sway Bar; Suspension Stabilizer Bar Bushing, Rear; Sway Bar Bushing; Bushings; Bushing Stabilizer Bar
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chrysler Concorde | LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Stabilizer Bar Bushing Part Number: 4601873
Product Specifications
- Other Name: Bushing - Rear Suspension Sway Bar; Sway Bar Bushing; Bushing; Bushings; Bushing Stabilizer Bar; Bushing, Sway Bar
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1997 Chrysler Concorde | Base, LX, LXi | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS

Chrysler Concorde Sway Bar Bushing

Choose OEM Sway Bar Bushing that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Sway Bar Bushing follows strict manufacturing steps to lock in quality and fit. If your Chrysler Concorde matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Concorde parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Concorde Sway Bar Bushing is a part which holds enormous importance and makes a lot of difference in stabilizing Chrylser Concorde vehicles. Intended for dampening any vibrations caused by roads as well as to reduce noises, these sway bar bushings have the added roles of supporting the sway bar - which maintains the car's body from rolling during cornering. This is especially crucial in achieving the car's stability and the quality of the ride in all the trims of the Chrysler Concorde, namely the LX, LXi and the limited. After a long time of using a car the sway bar bushings may get worn out and thus decrease the response of the car, or even make the car unsafe to use on the roads. Maintenance and lubrication of Chrysler Concorde Sway Bar Bushing should be done often to improve the ease of using the vehicle and for long service. These bushings are not simple parts in the car, but so important that they directly affect the performance of the suspension system of the car thus the driving experience. Consequently, the Chrysler Concorde Sway Bar Bushing is specifically designed to survive the test of the road and therefore stands out in the market. It, therefore, expands its compatibility with different Concorde models and proves its prowess to preserve the automobiles' integrity under different circumstances. To sum it all up, for any car owner who wants his/her Chrysler Concorde to have a better performance and safety, the Chrysler Concorde Sway Bar Bushing should be a must have.

Chrysler Concorde Sway Bar Bushing Parts and Q&A

Stabilizer Bar Bushing, Rear
4581161
Q: How to Service and Repair a Sway Bar Bushing on Chrysler Concorde?
A:
Before working on the front sway bar bushing, first raise the car using jack stands or a frame contact hoist. Before removing the next pieces, loosen the 2 bolts that hold every sway bar bushing retainer and bushing to the cradle assembly and take out the sway bar isolator bushing retainers from the isolator bushings. Check the retainers and bushings; if any of them are broken or distorted, remove the bushings, open the slit in the new bushings and slide them around the sway bar so the slit is toward the front of the car. Install the bushings onto the sway bar, with their slits at the front and the flat side down and then put the isolator bushing retainers back onto them. It is important to place the sway bar so its lower end is exactly midway on the cradle to avoid contact with other suspension parts. Place each sway bar bushing retainer into its mounting hole in the cradle assembly, attach it using the bolts to the assembly and secure them by torquing them to 61 Nm (45 ft. lbs.). Set the vehicle down onto the ground at the end.