How to Maintain and Fix a Wiper Arm on Chrysler Concorde?

To work on the wiper arm, cycle the wiper arm into PARK mode and shut off the ignition. Pick up a trim stick (special tool C-4755) or an alternative one and gently lift the cap that holds the retaining nut to remove it. After that, loosen and remove the retaining nut from the part where the wiper arm pivot attaches. Lift the arm up so the wiper blade is clear of the windshield, rock it left and right while it's on the pivot and then take it out of the car. When installing, secure the wiper arm to the wiper pivot and attach the retaining nut to the arm pivot. Later, fit the wiper arm retaining nut cap as directed by the manual. Next, move the wiper blades back and forth a few times so the arms are in the right place; make changes if needed.

How to Replace a Wiper Arm on Chrysler Concorde?

Before changing the front wiper arms, open the hood and take out the negative connection from the remote battery post. Take out the wiper module from your vehicle and detach the slave link from the pivot levers by loosening the ball and socket. Following that, remove the wiper module master link from the pivot lever and motor crank as you did before. Mentally note that out of the seven mounting grommets, the ones on the rear inboard and forward outboard may need to have their eyelet removed from the rubber isolator when taking them out. Should it be needed, remove the "U" nut from the body. When putting the master link or slave link in place, remove the special tools after wrapping them in cloth to protect the ball joint from damage and add light force as you join the ball with the socket. Any time a module is taken off, check and replace any damaged, cracked or broken mounting grommets too.

OEM Chrysler Concorde Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Wiper Arms found

View related parts
Chrysler Concorde Wiper Arm Part Number: 4769016
$44.55 MSRP: $128.00
You Save: $83.45 (66%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Wiper - Windshield Wiper - Right; Arm, Wiper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1996 Chrysler Concorde | Base, LX, LXi | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Wiper Motor Part Number: 4769121
$122.41 MSRP: $201.00
You Save: $78.59 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor - Windshield Wiper; Motor; Motor Windshield Wiper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1997 Chrysler Concorde | Base, LX, LXi | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Wiper Motor Part Number: 5011199AB
Product Specifications
- Other Name: Motor - Windshield Wiper; Windshield Wiper Motor; Motor; Motor Windshield Wiper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chrysler Concorde | LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Wiper Arm Part Number: 4874409
Product Specifications
- Other Name: Arm Wiper - Windshield Wiper - Left; Arm Wiper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997 Chrysler Concorde | LX, LXi | 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Wiper Arm, Driver Side Part Number: 5011205AB
Product Specifications
- Other Name: Arm Wiper - Wiper; Windshield Wiper Arm, Left; Arm Wiper
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chrysler Concorde | LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Concorde Wiper Arm, Passenger Side Part Number: 5011204AB
Product Specifications
- Other Name: Arm Wiper - Wiper; Windshield Wiper Arm, Right; Arm Wiper
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-2004 Chrysler Concorde | LX, LXi, Limited | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS

Chrysler Concorde Wiper Arm

Choose OEM Wiper Arm that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Wiper Arm follows strict manufacturing steps to lock in quality and fit. If your Chrysler Concorde matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Concorde parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Concorde Wiper Arm is one of many such priceless components through which Chrysler solidifies its marriage of luxury and performance. Specifically used to link the micro switch to the windshield wiper motor, the Wiper Arm is hugely significant in removing water, rain or even sleet from the windshield hence increasing the visibility of the road hence safe driving. Another Wiper Arm that fits different Chrysler Concorde models within the years 1993-2004, this particular one is a component of the wiper system that helps convert the rotational force from the motor into a sweeping action for improvement. The Chrysler Concorde Wiper Arm is highly recommended for its sturdy frame and consistency of performance and for these reasons it stands out in the market. As for, the Wiper Arm aspect is also important involving safety in a certain extend as it helps drivers to provide a clear view of the road in case of adverse weather conditions. Furthermore, the Chrysler Concorde Wiper Arm is manufactured to be durable and perform as expected in a car, thus, it is long lasting. This is of great importance especially when it is incorporated in the stylish design of Chrysler Concorde where it comes with features such as a low hood line and an apparent style. In conclusion, Chrysler Concorde Wiper Arm is not only a technological solution of the car, but it is the indication of the product quality and security features of Chrysler car and must be an important part of driving.

Chrysler Concorde Wiper Arm Parts and Q&A

Wiper Motor
5011199AB
Q: How to Maintain and Fix a Wiper Arm on Chrysler Concorde?
A:
To work on the wiper arm, cycle the wiper arm into PARK mode and shut off the ignition. Pick up a trim stick (special tool C-4755) or an alternative one and gently lift the cap that holds the retaining nut to remove it. After that, loosen and remove the retaining nut from the part where the wiper arm pivot attaches. Lift the arm up so the Wiper Blade is clear of the windshield, rock it left and right while it's on the pivot and then take it out of the car. When installing, secure the wiper arm to the wiper pivot and attach the retaining nut to the arm pivot. Later, fit the wiper arm retaining nut cap as directed by the manual. Next, move the wiper blades back and forth a few times so the arms are in the right place; make changes if needed.
Wiper Arm, Passenger Side
5011204AB
Q: How to Replace a Wiper Arm on Chrysler Concorde?
A:
Before changing the front wiper arms, open the hood and take out the negative connection from the remote battery post. Take out the wiper module from your vehicle and detach the slave link from the pivot levers by loosening the ball and socket. Following that, remove the wiper module master link from the pivot lever and motor crank as you did before. Mentally note that out of the seven mounting grommets, the ones on the rear inboard and forward outboard may need to have their eyelet removed from the rubber isolator when taking them out. Should it be needed, remove the "U" nut from the body. When putting the master link or slave link in place, remove the special tools after wrapping them in cloth to protect the ball joint from damage and add light force as you join the ball with the socket. Any time a module is taken off, check and replace any damaged, cracked or broken mounting grommets too.