How to Maintain and Fix a Belt Tensioner on Chrysler Crossfire?

Begin the process of servicing the belt tensioner by grasping both sides of the engine cover and pulling it up. Subsequently, slide the accessory drive belt off and take the pulley off the accessory drive belt tensioner. Then, remove the retaining bolts and remove both the tensioner as well as the belt itself from the car. Put the belt tensioner in place on the timing chain cover and fit and tighten the bolts using a torque of 20 Nm (15 ft. lbs.). Connect a wrench with the head of the tensioner to take out the tensioner locking pin. After that, fit the accessory drive belt and replace the engine cover by fitting the little clips into the rubber mounts and pushing them into place. Before putting on the engine cover, put lubricant on the rubber mounts to make it easier. After that, start the engine and check that the accessory drive belt is held correctly.

How to Install a Belt Tensioner on Chrysler Crossfire?

Place the drive belt tensioner on the timing chain cover, secure it with the tensioner bolts and tighten them to 20 Nm (15 ft. lbs.). Then, fasten the tensioner and loosen the locking pin it has. Attach the accessory drive belt, proceed with the engine cover, aligning the rubber mounts with the retaining clips and then push the cover down to fasten it. If you use a little oil on the rubber mounts, you should find the engine cover a lot easier to install. After everything is connected, start the car and make sure the accessory drive belt is away from moving parts properly.

OEM Chrysler Crossfire Belt Tensioner

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Belt Tensioners found

View related parts
Chrysler Crossfire Belt Tensioner Part Number: 5096525AA
$415.41 MSRP: $592.00
You Save: $176.59 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tensioner - Belt; Accessory Drive Belt Tensioner Assembly; Serpentine Belt Tensioner; Automatic Belt Tensioner.; Tensioner; Tensioner Belt; Accessory Drive Belt Tensioner; Drive Belt Tensioner
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Tensioner Part Number: 5143092AA
$111.84 MSRP: $151.00
You Save: $39.16 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tensioner - Supercharger Drive Belt; Tensioner Supercharger Drive Belt
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005 Chrysler Crossfire | SRT-6 | 6 Cyl 3.2 L GAS
View related parts
Chrysler Crossfire Tensioner Part Number: 5159903AA
Product Specifications
- Other Name: Tensioner - Supercharger Drive Belt
- Replaces: 5143108AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Chrysler Crossfire | SRT-6 | 6 Cyl 3.2 L GAS

Chrysler Crossfire Belt Tensioner

Choose OEM Belt Tensioner that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Belt Tensioner follows strict manufacturing steps to lock in quality and fit. If your Chrysler Crossfire matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Crossfire parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Belt Tensioner is vital part that has a great impact on the general performance and durability of Chrysler crossfire models. This part is responsible for ensuring the correct tension of the drive belt that links the engine to the alternator and the water pump among other related parts. The Belt Tensioner also has a strong spring well fitted to keep the drive belt tight for efficient force transmission giving the engine its most advantageous performing position. With usage, there can be sounds like squeaking and at times there are symptoms that show the necessity of looking at the belt and see if it requires replacing since the edges may be frayed. In particular, the Belt Tensioner is suitable for Crossfire belt tensioner models, so motorists can maintain their Crossfire car's efficiency and safety. Compared to other models, performance focused on rather significant differences that were not subject to yearly updates: for instance, a highly durable pulley and tensioner arm. Belt Tensioner uphold performance and safeness of the car by avoiding any failure of belt when the vehicle is in operation. Thus, Belt Tensioner is recognized by car owners as a component that ensures the car's proper functioning, its reliability, and smooth running, which is all that an enthusiast of Chrysler Crossfire needs in order to enjoy driving.

Chrysler Crossfire Belt Tensioner Parts and Q&A

Tensioner
5143092AA
Q: How to Maintain and Fix a Belt Tensioner on Chrysler Crossfire?
A:
Begin the process of servicing the belt tensioner by grasping both sides of the engine cover and pulling it up. Subsequently, slide the accessory Drive Belt off and take the pulley off the accessory drive belt tensioner. Then, remove the retaining bolts and remove both the tensioner as well as the belt itself from the car. Put the belt tensioner in place on the timing chain cover and fit and tighten the bolts using a torque of 20 Nm (15 ft. lbs.). Connect a wrench with the head of the tensioner to take out the tensioner locking pin. After that, fit the accessory drive belt and replace the engine cover by fitting the little clips into the rubber mounts and pushing them into place. Before putting on the engine cover, put lubricant on the rubber mounts to make it easier. After that, start the engine and check that the accessory drive belt is held correctly.
Belt Tensioner
5096525AA
Q: How to Install a Belt Tensioner on Chrysler Crossfire?
A:
Place the Drive Belt tensioner on the timing chain cover, secure it with the tensioner bolts and tighten them to 20 Nm (15 ft. lbs.). Then, fasten the tensioner and loosen the locking pin it has. Attach the accessory drive belt, proceed with the engine cover, aligning the rubber mounts with the retaining clips and then push the cover down to fasten it. If you use a little oil on the rubber mounts, you should find the engine cover a lot easier to install. After everything is connected, start the car and make sure the accessory drive belt is away from moving parts properly.