OEM Chrysler Crossfire Dipstick Tube

Chrysler Crossfire Dipstick Tube Parts and Q&A

• Tube
  5099318AA
  Q: How to Install a Dipstick Tube for Engine Oil on Chrysler Crossfire?

  A:

  First, replace the seal on the oil level indicator tube, put some engine oil inside the tube and ensure it is properly pushed in to avoid oil leaks. The next step is to situate the oil level indicator tube correctly and then fit it inside the crankcase. Make sure the bolt in the cylinder head cover is firmly tightened by turning it to a torque of 10 Nm (89 in. lbs.). After that, secure the wire harness loom above the oil level indicator tube using a fresh cable tie. Once you've completed those steps, put in the air cleaner housing. After the check, start the car's engine and see if there are any leaks.
• Tube
  5143050AA
  Q: How to Service and Repair a Dipstick Tube on Chrysler Crossfire?

  A:

  Before servicing or repairing the oil level indicator tube, take off the air cleaner housing. Now, pull out the bolt in the cylinder head cover of the oil level indicator tube and next remove the cable tie strap securing the wire loom on that tube. Slide back the car and take out the oil level indicator tube from the engine. When putting in a new tube, fit it correctly, seal it and oil it so the engine oil will not spill out or leak from the seals. Attach the oil level indicator tube to the crankcase, secure it with the bolt located in the cylinder head cover and screw it on firmly to 10 Nm (89 in. lbs.). Attach the wire harness loom to the oil level indicator tube and attach it with a new cable tie. After that, affix the air cleaner housing, turn on the engine and watch for leaks.