OEM Chrysler Crossfire Seat Switch

Chrysler Crossfire Seat Switch Parts and Q&A

• Seat Switch, Passenger Side
  1BF40XDVAA
  Q: How to Ensure Proper Functionality of a Seat Switch on a Chrysler Crossfire?

  A:

  Remove the front seat from your vehicle and take out the bolt that keeps the side panel attached to the seat base to service and repair the power seat switch. To separate the side panel with switches, push it both forward and downward off the moonroof tracks and disconnect the power seat switch harness. Remove the side panel on the seat base by starting from the back and disconnecting the cable straps at the front to open the wiring harness. Don't move the harness after installation; secure it in the exact position it came in, so it doesn't get in the way. Connect the wires from the power seat switch harness to their original sockets and link the connectors from the harness. Put the panel with the switches at the front where you want and fit the attaching screw into the side panel. Next, put back the front seat and then attach the end of the negative battery cable.
• Seat Switch, Driver Side
  1BF41XDVAA
  Q: How to Install a Seat Switch on Chrysler Crossfire?

  A:

  It is important to err from any disturbance with the seat's moving parts by making certain the harness is first put in its original position. Connect the two ends of connector 1 to power seat switch harness pin 9, using the original location for the harness. Attach the part with switches to the seat base in the side panel's location and then install side panel attaching screw 1. After that, place the front seat and hook up the negative cable to the battery.