How to Maintain and Fix a Voltage Regulator on Chrysler Crossfire?

Before servicing the voltage regulator, take out the generator (1). After that, undo the clips and remove the voltage regulator cover (4). After that, get rid of the screws (3) that connect the voltage regulator (2) to the generator and remove the voltage regulator. During installation, connect the voltage regulator (2) with its ground lug in contact with it. Put the screws (3) in place to hold the voltage regulator on the generator, then fit the plastic cover (4) with the clips and finally attach the generator (1).

OEM Chrysler Crossfire Voltage Regulator

Adjustable Voltage Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Voltage Regulator found

View related parts
Chrysler Crossfire Regulator Part Number: 5127665AD
Product Specifications
- Other Name: Regulator - Alternator
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chrysler Crossfire | Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

Chrysler Crossfire Voltage Regulator

Choose OEM Voltage Regulator that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Voltage Regulator follows strict manufacturing steps to lock in quality and fit. If your Chrysler Crossfire matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Crossfire parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Crossfire Voltage Regulator Parts and Q&A

Regulator
5127665AD
Q: How to Maintain and Fix a Voltage Regulator on Chrysler Crossfire?
A:
Before servicing the voltage regulator, take out the generator (1). After that, undo the clips and remove the voltage regulator cover (4). After that, get rid of the screws (3) that connect the voltage regulator (2) to the generator and remove the voltage regulator. During installation, connect the voltage regulator (2) with its ground lug in contact with it. Put the screws (3) in place to hold the voltage regulator on the generator, then fit the plastic cover (4) with the clips and finally attach the generator (1).