How to remove and install the headlight housing on Chrysler PT Cruiser?

Loosen the front wheel lug nuts, then raise the front of the vehicle and support it securely on jackstands. Remove the front wheel and the fender well splash shield, followed by the radiator grille. Take out the three bumper cover-to-fender fasteners on the side being worked on to create space for the headlight housing removal, and it may also be necessary to remove one or more bumper cover-to-radiator crossmember bolts. In the fenderwell, remove the retaining nuts that hold the headlight housing in place, detach the housing, and withdraw it from the vehicle. Disconnect the headlight and park/turn signal bulb electrical connectors. Installation is the reverse of removal, and be sure to check headlight adjustment afterward.

How to properly adjust the fog light bulb and headlight assemblies on the Chrysler Cirrus?

Many horizontal and vertical position headlights incorporated in assemblies have graduations that are factory set. Corrections should be carried out on a flat surface and better still, the fuel tank should be full and the vehicle should neither be over loaded nor under loaded. To set the suspension, jump up and down three times side to side, and bounce the front end three times up and down. Pop the hood to check the vertical indicators, the little bubble inside the vial must be over zero and it is permissible to be 0.75 degrees up or down. If needed, spin the vertical aim screw to come to the middle of the bubble without fiddling with the screw that is on the vial. Next, look on the horizontal indicators where at the adjuster you will find a arrow that must be pointing at zero in the gauge wheel. If it does not, turn the horizontal aiming screw the other way as a detrection to correct the problem. For alignment using a screen the ground should be level and the wall on which the screen will be set should be flat, the parking distance should be 25 feet. Slightly align a vertical masking tape line to the wall to the centerline and headlights of the vehicle and this can only be easily done if the vehicle is parked closely to the wall. Once again stabilise the suspension and record the distance from the floor to the center line of each headlight lens and scribe these dimensions on the wall using horizontal masking tape lines. Take a measuring tape and using the headlight lens as a point of reference, draw a vertical masking tape line along the wall up to a particular point. For the left head light the 2-inch square piece of tape should be located 8 inches below the horizontal that was drawn and 5 inches, to the right of the vertical line. For the right head light the 2-inch square piece of tape should be located 7 inches below the horizontal that was drawn and 9 inches to the right of the vertical line. If getting to turn on the low beam make adjustment up on the screws in a way that get to focus the hot spot of every headlight to its likely aims spot. If alignment problems remain or if the beam pattern looks wrong, consult the service section of a dealer or an authorized repair shop. Again, for fog light adjustment one has to park the vehicle 25 feet from a flat wall, suspend the fog light and measure the distance from the floor to the horizontal center line of each fog light lens and use a 3 feet horizontal tape along each of the fog lights. With the fog lights engaged, turn the screws until the extreme points of the projected fog light beam are about 4 inches below the horizontal tapes line.

OEM Chrysler Headlight

Headlamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

190 Headlights found

View related parts
Chrysler Composite Headlamp Part Number: 68284786AA
$439.79 MSRP: $664.00
You Save: $224.21 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight
Fits the following Chrysler Models:
- 200 | 2016-2017 | C, LX, Limited, S | 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Chrysler Composite Headlamp Part Number: 68284787AA
$441.97 MSRP: $644.00
You Save: $202.03 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight
Fits the following Chrysler Models:
- 200 | 2016-2017 | C, LX, Limited, S | 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Chrysler Headlamp Assembly, Black, Front Driver Side Part Number: 68284784AA
$541.45 MSRP: $817.00
You Save: $275.55 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight Assembly, Front Left; Composite Headlamp; Headlight
- Position: Front Driver Side
Fits the following Chrysler Models:
- 200 | 2015-2017 | C, LX, Limited, S | 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Chrysler Composite Headlamp Part Number: 68284782AA
$436.48 MSRP: $659.00
You Save: $222.52 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight
Fits the following Chrysler Models:
- 200 | 2016-2017 | C, LX, Limited, S | 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Chrysler Headlamp Assembly, Front Passenger Side Part Number: 57010760AA
$627.46 MSRP: $915.00
You Save: $287.54 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight, Front Right; Headlight
- Position: Front Passenger Side
- Replaces: 4805760AE, 4805760AH, 4805760AL, 4805760AD, 4805760AG, 4805760AJ, 4805760AF, 4805760AI, 4805760AK
Fits the following Chrysler Models:
- 300 | 2005-2006 | C, C SRT8 | 5.7L V8, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler Headlamp Assembly, Front Driver Side Part Number: 4857851AE
$299.14 MSRP: $543.00
You Save: $243.86 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight, Front Left; Headlamp - Driver Side; Headlight Assembly; Composite Assembly; Headlight
- Position: Front Driver Side
- Replaces: 4857851AD, 4857851AC
Fits the following Chrysler Models:
- Pacifica | 2005-2006 | Base, Limited, Touring | 3.5L V6, 3.8L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Composite Headlamp Part Number: 68285844AA
$950.95 MSRP: $1290.00
You Save: $339.05 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight
- Replaces: 68110249AD, 68110249AC, 68110249AE
Fits the following Chrysler Models:
- 200 | 2015-2016 | C, LX, Limited, S | 2.4L L4, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Chrysler Headlamp Assembly, Black Bezel, Front Driver Side Part Number: 68402943AB
$971.30 MSRP: $1475.00
You Save: $503.70 (35%)
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight, Front Left; Composite Assembly; Headlight
- Position: Front Driver Side
- Replaces: 68214385AD, 68214385AC, 68214385AF, 68402943AA, 68214385AB
Fits the following Chrysler Models:
- 300 | 2015-2023 | C, C Platinum, Limited, S, Touring, Touring L | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Headlamp Assembly, Black Bezel, Front Passenger Side Part Number: 68285847AA
$906.10 MSRP: $1370.00
You Save: $463.90 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight Assembly, Front Right; Composite Headlamp; Headlight
- Position: Front Passenger Side
- Replaces: 68145684AE, 68145684AD, 68145684AC
Fits the following Chrysler Models:
- 200 | 2015 | C, LX, Limited, S | 2.4L L4, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Chrysler Headlamp Assembly, Black, Front Passenger Side Part Number: 68285845AA
$802.23 MSRP: $1220.00
You Save: $417.77 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight Assembly, Front Right; Composite Headlamp; Headlight
- Position: Front Passenger Side
- Replaces: 68110250AE, 68110250AC, 68110250AD
Fits the following Chrysler Models:
- 200 | 2015-2016 | C, LX, Limited, S | 2.4L L4, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Chrysler Headlamp Assembly, Black Bezel Part Number: 68402942AB
$941.46 MSRP: $1425.00
You Save: $483.54 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight; Composite Assembly
- Replaces: 68402942AA, 68214384AD, 68214384AB, 68214384AF, 68214384AC
Fits the following Chrysler Models:
- 300 | 2015-2023 | C, C Platinum, Limited, S, Touring, Touring L | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Headlamp Assembly, Black Bezel, Front Driver Side Part Number: 5182591AE
$587.64 MSRP: $788.00
You Save: $200.36 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight, Front Left; Headlight Assembly; Head Lamps; Composite Headlamp; Headlight
- Position: Front Driver Side
- Replaces: 5182591AB, 5182591AD, 5182591AC, 5182591AA
Fits the following Chrysler Models:
- 200 | 2011-2014 | LX, Limited, S, Touring | 2.4L L4, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Chrysler Headlamp Assembly, Black Bezel, Front Driver Side Part Number: 68088067AG
$571.29 MSRP: $864.00
You Save: $292.71 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight, Front Left; Headlight Assembly; Head Lamps; Composite Headlamp; Headlight
- Position: Front Driver Side
- Replaces: 68088067AF
Fits the following Chrysler Models:
- 200 | 2011-2014 | LX, Limited, S, Touring | 2.4L L4, 3.6L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.6 L FLEX
View related parts
Chrysler Headlamp Assembly, Front Passenger Side Part Number: 57010862AA
$160.59 MSRP: $238.00
You Save: $77.41 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight, Front Right; Headlight Assembly; Head Lamps; Composite Headlamp; Headlight
- Position: Front Passenger Side
- Replaces: 4805862AD, 4805862AI, 4805862AF, 4805862AK, 4805862AE, 4805862AH, 4805862AJ, 4805862AG
Fits the following Chrysler Models:
- 300 | 2005-2010 | C, C SRT8, LX, Limited, S, Touring | 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler Composite Headlamp Part Number: 5113341AG
$436.48 MSRP: $659.00
You Save: $222.52 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp - Headlamp Parking And Turn; Headlight; Lamp Headlamp Parking And Turn
- Replaces: 5113341AD, 5113341AE, 5113341AF, 5113341AC
Fits the following Chrysler Models:
- Town & Country | 2008-2015 | LX, Limited, Touring, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Headlamp Assembly, Front Driver Side Part Number: 57010761AA
$571.36 MSRP: $832.00
You Save: $260.64 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight, Front Left; Headlight
- Position: Front Driver Side
- Replaces: 4805761AG, 4805761AJ, 4805761AL, 4805761AK, 4805761AF, 4805761AH, 4805761AE, 4805761AD, 4805761AI
Fits the following Chrysler Models:
- 300 | 2005-2006 | C, C SRT8 | 5.7L V8, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler Composite Assembly, Black Bezel Part Number: 68402944AB
$687.24 MSRP: $920.00
You Save: $232.76 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight
- Replaces: 68402944AA
Fits the following Chrysler Models:
- 300 | 2019-2023 | C, Limited, S, Touring, Touring L | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Headlamp Assembly, Front Driver Side Part Number: 57010863AA
$478.47 MSRP: $723.00
You Save: $244.53 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight, Front Left; Headlight Assembly; Head Lamps; Composite Headlamp; Headlight
- Position: Front Driver Side
- Replaces: 4805863AI, 4805863AJ, 4805863AK, 4805863AH, 4805863AD, 4805863AG, 4805863AE, 4805863AF
Fits the following Chrysler Models:
- 300 | 2005-2010 | C, C SRT8, LX, Limited, S, Touring | 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
Chrysler Composite Assembly, Black Bezel Part Number: 68402945AB
$628.75 MSRP: $949.00
You Save: $320.25 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Headlamp; Headlight
- Replaces: 68402945AA
Fits the following Chrysler Models:
- 300 | 2019-2023 | C, Limited, S, Touring, Touring L | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.4 L GAS
View related parts
Chrysler Composite Assembly, Black Bezel Part Number: 68214388AF
$705.32 MSRP: $1035.00
You Save: $329.68 (32%)
Product Specifications
- Other Name: Headlamp; Headlight
- Replaces: 68214388AD, 68214388AC, 68214388AE, 68214388AB
Fits the following Chrysler Models:
- 300 | 2015-2018 | C, C Platinum, Limited, S, Touring, Touring L | 3.6L V6, 5.7L V8, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.4L V8, 8 Cyl 5.7 L GAS

| Page 1 of 10 |Next >

1-20 of 190 Results

Chrysler Headlight

OEM parts sourced directly from Chrysler deliver superior quality, long lasting strength, and a precise fit you can trust. Each item goes through strict quality checks to ensure safety, toughness, and performance that matches your factory equipment. At JeepPartsDeal online shop, you'll get top-quality, budget-friendly OEM Chrysler Headlight for your vehicle. We focus on giving you a high standard without pushing up the price. Our full selection of genuine factory products comes backed by the original manufacturer's warranty. You'll love our fast delivery, seamless shopping experience, and convenient return policy, saving you all the hassle.

Chrysler Headlight casts certain light in front to ensure that night driving is peaceful and assured. Chrysler had made its reputation on cars that felt good, sold at reasonable prices, and had not given shoppers any of the fancy half-trick gimmicks to use, so the teenager, parents, and even the retired found it easy to be as confident on the road as any other day of the week. Chrysler engine vibration was confined with Floating Power, which allowed cabins to remain smooth, even when the roads became ugly, allowing cups of coffee to rest and conversations to be effortless. Chrysler followed with radical Airflow styling that cut wind, silenced noise, and raised interior comfort for all on board, an indication that there was genuine respect for airflow science rather than chrome fluff. The spacious minivan was subsequently introduced by Chrysler, showing that the brand could combine roomy space and stable ride quality in a single vehicle. The development of Headlight today has introduced LED projectors, tight packs, and intelligent beam patterns that light up the road without blistering Headlight of the passing cars and has made the position of the bulb easy to switch to make the unit accommodative to driveway repairs. The Headlight are adjusted with simple tilt screws on the fascia, meaning that the drivers can pull aggressive glare off the trees and fine-tune the beams to the exact spot the lane starts. The lifespan of Headlight can be increased by wiping lenses, applying UV filters, and replacing the aging glass before it fogs and takes away night vision.

Chrysler Headlight Parts and Q&A

Headlamp Assembly, Front Driver Side
5288765AI
Q: How to remove and install the headlight housing on Chrysler PT Cruiser?
A:
Loosen the front wheel lug nuts, then raise the front of the vehicle and support it securely on jackstands. Remove the front wheel and the fender well splash shield, followed by the radiator grille. Take out the three bumper cover-to-fender fasteners on the side being worked on to create space for the headlight housing removal, and it may also be necessary to remove one or more bumper cover-to-radiator crossmember bolts. In the fenderwell, remove the retaining nuts that hold the headlight housing in place, detach the housing, and withdraw it from the vehicle. Disconnect the headlight and park/turn signal bulb electrical connectors. Installation is the reverse of removal, and be sure to check headlight adjustment afterward.
Composite Assembly
4630872AB
Q: How to properly adjust the fog light bulb and headlight assemblies on the Chrysler Cirrus?
A:
Many horizontal and vertical position headlights incorporated in assemblies have graduations that are factory set. Corrections should be carried out on a flat surface and better still, the fuel tank should be full and the vehicle should neither be over loaded nor under loaded. To set the suspension, jump up and down three times side to side, and bounce the front end three times up and down. Pop the hood to check the vertical indicators, the little bubble inside the vial must be over zero and it is permissible to be 0.75 degrees up or down. If needed, spin the vertical aim screw to come to the middle of the bubble without fiddling with the screw that is on the vial. Next, look on the horizontal indicators where at the adjuster you will find a arrow that must be pointing at zero in the gauge wheel. If it does not, turn the horizontal aiming screw the other way as a detrection to correct the problem. For alignment using a screen the ground should be level and the wall on which the screen will be set should be flat, the parking distance should be 25 feet. Slightly align a vertical masking tape line to the wall to the centerline and headlights of the vehicle and this can only be easily done if the vehicle is parked closely to the wall. Once again stabilise the suspension and record the distance from the floor to the center line of each headlight lens and scribe these dimensions on the wall using horizontal masking tape lines. Take a measuring tape and using the headlight lens as a point of reference, draw a vertical masking tape line along the wall up to a particular point. For the left head light the 2-inch square piece of tape should be located 8 inches below the horizontal that was drawn and 5 inches, to the right of the vertical line. For the right head light the 2-inch square piece of tape should be located 7 inches below the horizontal that was drawn and 9 inches to the right of the vertical line. If getting to turn on the low beam make adjustment up on the screws in a way that get to focus the hot spot of every headlight to its likely aims spot. If alignment problems remain or if the beam pattern looks wrong, consult the service section of a dealer or an authorized repair shop. Again, for fog light adjustment one has to park the vehicle 25 feet from a flat wall, suspend the fog light and measure the distance from the floor to the horizontal center line of each fog light lens and use a 3 feet horizontal tape along each of the fog lights. With the fog lights engaged, turn the screws until the extreme points of the projected fog light beam are about 4 inches below the horizontal tapes line.