How to Service and Repair a Front Door Hinge on Chrysler LHS?

Before starting, mark where the hinge is located on the hinge pillar. First remove the bolt and nut connecting the hinge to the front door, next take out the hinge bolts and finally free the hinge from the vehicle. First, take out the door hinge if you have a double ended stud mechanism. Double up the nut on the stud and take it out of the door frame; if it's broken, use locking pliers at the shoulder to back it out. For installation, put the hinge bracket on the car and tighten the bolt and nut after it's in place, so the bolt reaches a torque of 28 N.m (250 in.lbs.). After that, connect the hinge to the front door with the included bolt and nut, Allowing for a torque of 28 N.m (250 in.lbs.). If you have changed the double ended stud, be sure to tighten it to 14 N.m (120 in.lbs.). When the door is installed, inspect it to ensure it is both aligned and working properly; improve alignment as needed. If using a double ended stud, make sure replacement studs have been coated in thread sealer. If you are using the original studs, apply Mopar® Lock and Seal Adhesive or something similar to the threads before installing. Hold the double ended stud against the frame, tighten it to 14 N.m (120 in.lbs.) and then mount the hinge and tighten the hinge bolt and nut to 28 N.m (250 in.lbs.). Confirm the door operates well and makes no strange sounds and if it does, readjust it.

How to Service and Repair a Rear Door Hinge on Chrysler LHS?

To service and repair the rear door hinge mark fist the outline of the hinge on the B-pillar and door end frame. Remove the nut and bolt that holds hinge to B pillar then remove the nut and bolt that attach hinge to door end frame. Once the hinge has been removed from the door realign the new hinge to the marks on the end of the door frame and position it in place. Install all the nuts and bolts which attach the hinge to the door end frame, aligning the hinge to the marks on the B pillar then finally installing all the nuts and bolts which attach the hinge to the B pillar. Finally, check the door alignment and operation and make any adjustments.

OEM Chrysler LHS Door Hinge

Interior Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Door Hinges found

View related parts
Chrysler LHS Hinge, Lower Part Number: 4756269
$3.21 MSRP: $4.07
You Save: $0.86 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Front Door Lower Door Half; Hinge Front Door Half With Bushings; Hinge, Door Half
- Position: Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Lower Hinge, Rear Passenger Side Part Number: 4574436
$6.21 MSRP: $7.87
You Save: $1.66 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Rear Door Lower; Door Hinge, Rear Right Lower; Hinge Rear Door Lower; Door Hinge
- Position: Rear Lower Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Hinge, Lower Part Number: 4756268
Product Specifications
- Other Name: Hinge Front Door Lower Door Half; Hinge Front Door Half With Bushings; Hinge, Door Half
- Position: Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Upper Hinge, Front Passenger Side Part Number: 4574274AB
Product Specifications
- Other Name: Hinge - Front Door Upper; Door Hinge, Front Right Upper; Hinge Front Door Upper; Door Hinge
- Position: Front Upper Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Lower Hinge, Front Passenger Side Part Number: 4574300AB
Product Specifications
- Other Name: Hinge - Front Door Lower; Door Hinge, Front Right Lower; Hinge Front Door Lower; Door Hinge
- Position: Front Lower Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Hinge, Rear Lower Part Number: 4756278
Product Specifications
- Other Name: Hinge Ft Lower Rear Up Body Ha; Hinge Front Door Body Half; Hinge, Body Half
- Position: Rear Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Hinge Part Number: 4756265
Product Specifications
- Other Name: Hinge Front Door Upper Door Half; Door Hinge; Hinge Front Door Door Half With Bushings; Hinge, Door Half
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-1997 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Lower Hinge, Rear Driver Side Part Number: 4574437
Product Specifications
- Other Name: Hinge - Rear Door Lower; Door Hinge, Rear Left Lower; Hinge Rear Door Lower; Door Hinge
- Position: Rear Lower Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Upper Hinge, Rear Driver Side Part Number: 4574429
Product Specifications
- Other Name: Hinge - Rear Door Upper; Door Hinge, Rear Left Upper; Hinge Rear Door Upper; Door Hinge
- Position: Rear Upper Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Upper Hinge, Rear Passenger Side Part Number: 4574428
Product Specifications
- Other Name: Hinge - Rear Door Upper; Door Hinge, Rear Right Upper; Hinge Rear Door Upper; Door Hinge
- Position: Rear Upper Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Upper Hinge, Front Driver Side Part Number: 4574275AB
Product Specifications
- Other Name: Hinge - Front Door Upper; Door Hinge, Front Left Upper; Hinge Front Door Upper; Door Hinge
- Position: Front Upper Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Hinge Part Number: 4756980
Product Specifications
- Other Name: Hinge - Front Upper Body Half Right; Door Hinge; Hinge Front Door Body Half
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Lower Hinge, Front Driver Side Part Number: 4574301AB
Product Specifications
- Other Name: Hinge - Front Door Lower; Door Hinge, Front Left Lower; Hinge Front Door Lower; Door Hinge
- Position: Front Lower Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Hinge, Rear Passenger Side Part Number: 4575144AG
Product Specifications
- Other Name: Hinge - Deck Lid; Deck Lid Hinge, Rear Right; Door Hinge
- Position: Rear Passenger Side
- Replaces: 4575144AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Hinge, Rear Driver Side Part Number: 4575145AG
Product Specifications
- Other Name: Hinge - Deck Lid; Deck Lid Hinge, Rear Left; Door Hinge
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 6 Cyl 3.5 L GAS

Chrysler LHS Door Hinge

Choose OEM Door Hinge that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Door Hinge follows strict manufacturing steps to lock in quality and fit. If your Chrysler LHS matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine LHS parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler LHS Door Hinge is a rather important element that speaks about the reliability and the performance of the Chrysler LHS, which is the luxury sedan model of the company. As the intermediate component in the door-vehicle body connection, the Door Hinge enables proper functioning of the doors, which in this case are to open and close in the correct manner. Eventually, this kind of hinges are subjected to wear and tear and this tends to hinder the proper functioning of the doors such as door sagging and misalignment which are dangerous to human life and time. The Chrysler LHS models are a series of vehicles manufactured from the years 1994 to 2001 and have a wide selection of Door Hinges styles, some of which are bolted for easy replacement while others are welded; it only underlines the aspect of compatibility more. These Door Hinges especially as they are constructed as strong parts like steel improves the performance of Chrysler LHS thus giving the car a reputation of being strong. Furthermore, contemporary architecture designs come with door check straps that minimizes the swing's movement, a major improvement in this aspect compared to earlier hinge systems. Chrysler LHS Door Hinge is both functional and has a safety significance because it guarantees correct positioning of the automobile doors. Due to these characteristics and universality of the model, Chrysler LHS Door Hinge can be highlighted in the car parts market, illustrating the company's attention to quality and development of their LHS models sedans.

Chrysler LHS Door Hinge Parts and Q&A

Lower Hinge, Front Passenger Side
4574300AB
Q: How to Service and Repair a Front Door Hinge on Chrysler LHS?
A:
Before starting, mark where the hinge is located on the hinge pillar. First remove the bolt and nut connecting the hinge to the front door, next take out the hinge bolts and finally free the hinge from the vehicle. First, take out the door hinge if you have a double ended stud mechanism. Double up the nut on the stud and take it out of the door frame; if it's broken, use locking pliers at the shoulder to back it out. For installation, put the hinge bracket on the car and tighten the bolt and nut after it's in place, so the bolt reaches a torque of 28 N.m (250 in.lbs.). After that, connect the hinge to the front door with the included bolt and nut, Allowing for a torque of 28 N.m (250 in.lbs.). If you have changed the double ended stud, be sure to tighten it to 14 N.m (120 in.lbs.). When the door is installed, inspect it to ensure it is both aligned and working properly; improve alignment as needed. If using a double ended stud, make sure replacement studs have been coated in thread sealer. If you are using the original studs, apply Mopar® Lock and Seal Adhesive or something similar to the threads before installing. Hold the double ended stud against the frame, tighten it to 14 N.m (120 in.lbs.) and then mount the hinge and tighten the hinge bolt and nut to 28 N.m (250 in.lbs.). Confirm the door operates well and makes no strange sounds and if it does, readjust it.
Upper Hinge, Rear Driver Side
4574429
Q: How to Service and Repair a Rear Door Hinge on Chrysler LHS?
A:
To service and repair the rear door hinge mark fist the outline of the hinge on the B-pillar and door end frame. Remove the nut and bolt that holds hinge to B pillar then remove the nut and bolt that attach hinge to door end frame. Once the hinge has been removed from the door realign the new hinge to the marks on the end of the door frame and position it in place. Install all the nuts and bolts which attach the hinge to the door end frame, aligning the hinge to the marks on the B pillar then finally installing all the nuts and bolts which attach the hinge to the B pillar. Finally, check the door alignment and operation and make any adjustments.