How to Service and Repair Exterior Emblems on Chrysler LHS?

You should first note the points you will use for reference just before taking out the exterior name plates. For double-sided tape, pass the heat gun around the emblem in a slow, careful circle to break the bond and then lift and remove the emblem using a nonmetallic pry tool. Clean up any leftover adhesive or tape from the panel by using a typical rubber cement removal product. When removing the badge or tape glue with heat, again mark fixed spots, heat and use your fingernail to peel away with ongoing heat. Gently remove any sticky marks left by the adhesive with a general adhesive remover. For panels attached with double-sided tape, rub isopropyl alcohol on the panel, place the badge according to the marks shown, press everything onto the surface and wash away all reference marks. To install adhesive, clean the panel with isopropyl alcohol, take off the paper carrier, place the badge or tape so it lines up with your reference points or nearby panel, push it on securely using a plastic spreader, remove the top covering and get rid of any reference marks.

OEM Chrysler LHS Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Emblems found

View related parts
Chrysler LHS Emblem, Rear Part Number: 4805065AB
$55.30 MSRP: $63.45
You Save: $8.15 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ornament - Decklid; Deck Lid Emblem, Rear; Nameplate; Emblem Decklid Winged Victory
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Medallion Part Number: 4769260
Product Specifications
- Other Name: Ornament; Medallion Radiator Grill; Medallion, Grille; Emblem, Grille
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Emblem, Rear Part Number: 4805455AB
Product Specifications
- Other Name: Ornament - Rear Door; Medallion Rear Door Seal
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 6 Cyl 3.5 L GAS
View related parts
Chrysler LHS Emblem, Front Part Number: 5011615AA
Product Specifications
- Other Name: Ornament - Winged Medallion; Bumper Cover Emblem, Front; Grille Emblem, Front; Medallion; Plinth Winged Medallion Serviced In Grille Assembly; With Medallion; Plinth Winged Medallion
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2001 Chrysler LHS | Base | 6 Cyl 3.5 L GAS

Chrysler LHS Emblem

Choose OEM Emblem that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Emblem follows strict manufacturing steps to lock in quality and fit. If your Chrysler LHS matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine LHS parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler LHS emblem stands as the brand's signature element for reliability alongside performance so it identifies this full-size luxury sedan without compromise. The Chrysler LHS entered production in 1994 and ran until 2001 along with features that made it the respected flagship model for the brand and included premium handling performance and first-class interiors. The LHS emblem which can be found as a hood ornament or flat attachment improves Chrysler brand visibility and represents the high-quality brand reputation of their vehicles. Each vehicle maintains its original styling identity thanks to this(identifiable) emblem which works with different LHS models for increased safety through efficient design elements. Various materials and design styles have been applied to create the LHS emblem which makes the vehicle more attractive to consumers. During the initial LHS production run Chrysler integrated a 3.5 L V6 engine within their vehicle but they brought significant improvements to the second generation which added stronger engine power and a new feature of in-dash CD capabilities. The Chrysler automobile emblem creates a significant impression in the automotive domain because it embodies the vehicle's track record of reliability as well as performance capabilities. The car emblem functions as a crucial element for vehicle maintenance with a price range from $10 to $200 since it preserves both functional and branding integrity of the model luxury sedan model.

Chrysler LHS Emblem Parts and Q&A

Emblem, Rear
4805065AB
Q: How to Service and Repair Exterior Emblems on Chrysler LHS?
A:
You should first note the points you will use for reference just before taking out the exterior name plates. For double-sided tape, pass the heat gun around the emblem in a slow, careful circle to break the bond and then lift and remove the emblem using a nonmetallic pry tool. Clean up any leftover adhesive or tape from the panel by using a typical rubber cement removal product. When removing the badge or tape glue with heat, again mark fixed spots, heat and use your fingernail to peel away with ongoing heat. Gently remove any sticky marks left by the adhesive with a general adhesive remover. For panels attached with double-sided tape, rub isopropyl alcohol on the panel, place the badge according to the marks shown, press everything onto the surface and wash away all reference marks. To install adhesive, clean the panel with isopropyl alcohol, take off the paper carrier, place the badge or tape so it lines up with your reference points or nearby panel, push it on securely using a plastic spreader, remove the top covering and get rid of any reference marks.