How to Maintain and Repair Adhesive-Attached Emblems on Chrysler Pacifica?

For adhesive-attached exterior name plates, mark reference spots before taking the name plate off. Softly heat the area with a heat gun in small circles to break the bond. While using the heat gun, lift the name plates or tape off with your nails and continue where needed. After taking off the film, remove all traces of sticky residue from the panel with a simple adhesive remover. To install the panel correctly, clean its surface first with isopropyl alcohol. Take off the paper carrier and join the name plates to the points marked or next to the panels. Stick the name plates down firmly, spread them out with a plastic spreader followed by cleaning away any trace marks.

How to Remove an Emblem from the Body on Chrysler Pacifica?

In order to remove the body emblem it is first necessary to mark reference points. Once the glue is slicked on a heat gun is then gently applied in a circular motion to loosen the adhesive bond in the glue. Next use a nonmetallic prying device like a piece of plastic or wood trim stick in order to gently pry up in the corners and pull off the emblem. Last of all, rub off the last traces of adhesive or double sided tape from the panel with a general purpose adhesive remover.

OEM Chrysler Pacifica Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

25 Emblems found

View related parts
Chrysler Pacifica Emblem, Black Part Number: 68370946AA
$85.99 MSRP: $128.00
You Save: $42.01 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem Winged Victory Complete Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2020 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Touring, Touring L, Touring L Plus, Touring Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Center Cap Part Number: 6ES82SZ0AA
$30.55 MSRP: $44.70
You Save: $14.15 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Cap Wheel Center
- Position: Center
- Replaces: 1LB74SZ0AB, 1LB74SZ0AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2020 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Platinum, Hybrid Premium, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Center Cap Part Number: 1LB74SZ7AB
$49.31 MSRP: $72.15
You Save: $22.84 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap - Wheel Center; Wheel Cap; Wheel Center Cap; Hub Cap; Cap Wheel Center
- Position: Center
- Replaces: 1LB74SZ7AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2020 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Platinum, Hybrid Premium, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Touring, Touring L, Touring L Plus, Touring Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Emblem Leaf E Part Number: 55112857AB
$87.69 MSRP: $130.00
You Save: $42.31 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem
- Replaces: 55112857AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus | 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Insert, Blue Part Number: 68240977AA
$57.25 MSRP: $98.30
You Save: $41.05 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem; Nameplate; Emblem Winged Victory Chrysler Insert Only
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2022, 2017-2019 Chrysler Pacifica | Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Touring, Touring L, Touring L Plus, Touring Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Emblem, Black Part Number: 68088468AA
$59.94 MSRP: $88.25
You Save: $28.31 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Insert; Nameplate; Emblem Winged Victory Included With Item #1; Insert and Inlay Options Available.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2024 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Touring, Touring L, Touring L Plus, Touring Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Insert, Black Part Number: 68081542AB
$64.58 MSRP: $95.00
You Save: $30.42 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem; Emblem Winged Victory Included With Item #1; Emblem Winged Victory
- Replaces: 68081542AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2019 Chrysler Pacifica | Hybrid Platinum, Hybrid Premium, LX, Limited, Touring, Touring L, Touring L Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Emblem, Black/Blue Part Number: 68464895AA
$67.41 MSRP: $99.20
You Save: $31.79 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Nameplate
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2022 Chrysler Pacifica | Hybrid Limited, Hybrid Pinnacle, Hybrid Touring, Hybrid Touring L, Limited, Pinnacle, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Emblem Part Number: 68464894AA
$67.75 MSRP: $99.70
You Save: $31.95 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Nameplate
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2025 Chrysler Pacifica | Hybrid Limited, Hybrid Pinnacle, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Limited, Pinnacle, Select, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Nameplate, Chrysler Wing Part Number: 68477737AA
$68.49 MSRP: $101.00
You Save: $32.51 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: NAMEPLATE-CHRYSLER WING
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2021-2025 Chrysler Pacifica | Hybrid Limited, Hybrid Pinnacle, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Limited, Pinnacle, Select, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Emblem, Front Part Number: 68465305AA
$78.80 MSRP: $117.00
You Save: $38.20 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Ornament; Grille Emblem, Front; Emblem Winged Victory Complete Assembly
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2023-2025 Chrysler Pacifica | Hybrid Limited, Hybrid Pinnacle, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring L, Limited, Pinnacle, Select, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Emblem, Black Part Number: 68415308AA
$82.48 MSRP: $123.00
You Save: $40.52 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem Winged Victory Complete Assembly
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2019-2020 Chrysler Pacifica | Hybrid Limited, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus | 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Nameplate, Rear Part Number: 68320934AB
$82.94 MSRP: $123.00
You Save: $40.06 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Nameplate - Liftgate; Hatch Emblem, Rear
- Position: Rear
- Replaces: 68227600AA, 68320934AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Pinnacle, Select, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Nameplate Part Number: 68370945AA
$89.79 MSRP: $133.00
You Save: $43.21 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Nameplate - Liftgate; Nameplate Liftgate Pacifica Pacifica S
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2018-2020 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Touring, Touring L, Touring L Plus, Touring Plus | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Nameplate, Rear Part Number: 68323699AA
$89.79 MSRP: $133.00
You Save: $43.21 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Nameplate, Ehybrid; Hatch Emblem, Rear; Nameplate Liftgate Ehybrid; Nameplate Hybrid
- Position: Rear
- Replaces: 68240017AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2025 Chrysler Pacifica | Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Road Tripper, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus | 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Emblem, Front Part Number: 68240976AA
$89.79 MSRP: $133.00
You Save: $43.21 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Grille Emblem, Front; Emblem Winged Victory Complete Assembly
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2022 Chrysler Pacifica | Hybrid Limited, Hybrid Pinnacle, Hybrid Platinum, Hybrid Premium, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, Limited, Pinnacle, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Emblem, Front Part Number: 68227453AB
$89.79 MSRP: $133.00
You Save: $43.21 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Grille Emblem, Front; Emblem Winged Victory Complete Assembly
- Position: Front
- Replaces: 68227453AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2020 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Platinum, Hybrid Premium, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Nameplate, Rear Part Number: 68477734AA
$110.52 MSRP: $164.00
You Save: $53.48 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wing Assembly - Chrysler Wing; Hatch Emblem, Rear
- Position: Rear
- Replaces: 55112847AA, 68446931AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2020 Chrysler Pacifica | AWD Launch Edition, Hybrid Limited, Hybrid Platinum, Hybrid Premium, Hybrid Touring, Hybrid Touring L, Hybrid Touring Plus, L, LX, Limited, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Cap - Wheel Center Part Number: 68630137AA
$26.22 MSRP: $38.40
You Save: $12.18 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CAP-WHEEL CENTER
- Position: Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2023-2024 Chrysler Pacifica | Hybrid Limited, Hybrid Pinnacle, Hybrid Premium S Appearance, Hybrid Road Tripper, Hybrid S Appearance, Hybrid Select, Hybrid Touring L, Limited, Pinnacle, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.6 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Chrysler Pacifica Emblem Part Number: 4857662AE
Product Specifications
- Other Name: Emblem - Hood
- Replaces: 4857662AC, 4857662AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chrysler Pacifica | Base, LX, Limited, Touring | 3.5L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

| Page 1 of 2 |Next >

1-20 of 25 Results

Chrysler Pacifica Emblem

Choose OEM Emblem that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Emblem follows strict manufacturing steps to lock in quality and fit. If your Chrysler Pacifica matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Pacifica parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Pacifica displays its renowned Emblem that embodies both robust reliability features and motivational performance capabilities within the automotive sector. The Chrysler Pacifica Emblem stands out as a vital manufacturer identification tool and it presents itself either as a front hood ornament or a flat attachment located on the hood and trunk which adds unique style to the Pacifica's appearance. Through the years the Pacifica Emblem developed distinct variations of design elements that showcase the vehicle's modern innovation. The Emblem exists for multiple Pacifica models to enhance both driving safety and efficiency features that combine superior looks with practical operation for drivers. The Chrysler Pacifica maintains a strong market reputation as it received optimal Minivan of 2016 award in addition to winning 2020 optimal Family Car award. Like all Chrysler products the Emblem both represents outstanding performance and engineering achievements through its association with car's 3.6 L Pentastar V6 engine and plug-in hybrid options. The Chrysler model presents itself as a multi-purpose family vehicle through its generous space configuration while its Emblem delivers recognition of Chrysler's commitment to designing safe transportation. The car Emblem surpasses its logo status because it represents the core values of the automaker's creative engineering alongside commitment to quality excellence.

Chrysler Pacifica Emblem Parts and Q&A

Nameplate, Rear
55157216AB
Q: How to Maintain and Repair Adhesive-Attached Emblems on Chrysler Pacifica?
A:
For adhesive-attached exterior name plates, mark reference spots before taking the name plate off. Softly heat the area with a heat gun in small circles to break the bond. While using the heat gun, lift the name plates or tape off with your nails and continue where needed. After taking off the film, remove all traces of sticky residue from the panel with a simple adhesive remover. To install the panel correctly, clean its surface first with isopropyl alcohol. Take off the paper carrier and join the name plates to the points marked or next to the panels. Stick the name plates down firmly, spread them out with a plastic spreader followed by cleaning away any trace marks.
Emblem
4857662AE
Q: How to Remove an Emblem from the Body on Chrysler Pacifica?
A:
In order to remove the body emblem it is first necessary to mark reference points. Once the glue is slicked on a heat gun is then gently applied in a circular motion to loosen the adhesive bond in the glue. Next use a nonmetallic prying device like a piece of plastic or wood trim stick in order to gently pry up in the corners and pull off the emblem. Last of all, rub off the last traces of adhesive or double sided tape from the panel with a general purpose adhesive remover.