How to Properly Install an Exhaust Manifold on Chrysler Pacifica?

With the exhaust manifold, put it in place on the cylinder head and add the bolts to the center runner (cylinder #4). Tighten the bolts to 2.8 Nm (25 in. lbs.) at first. Place a new gasket around the crossover pipe as you attach it to the exhaust manifold and tighten the bolts to 41 Nm (30 ft. lbs.). Then, carefully check the crossover pipe fasteners for heat and corrosion damage, since the bolts are a special type of stainless steel. After that, place the heat shield onto the manifold and attach and tighten the remaining manifold bolts to 28 Nm (250 in. lbs.) Nonetheless, the element you place needs to be safely secured on the manifold. Put on the heat shield attaching nut with 12 Nm (105 in. lbs.) of force and after that, join the negative cable from the battery.

How to Remove and Replace an Exhaust Manifold for Left on Chrysler Pacifica?

Start by resting the exhaust manifold (2) onto the cylinder head and screw in the bolts to the middle runner (cylinder #4), tightening them to only 2.8 Newton meteres (25 inch-pounds). Next, set a new gasket on the manifold and attach the crossover pipe (1). Tighten the bolts to 41 Nm (30 ft. lbs.), inspect the crossover pipe fasteners closely for damage from heat and corrosion, since the crossover bolts are made of specially treated stainless steel and use only OEM bolts when making replacements. After that, fit the heat shield onto the manifold and fasten the rest of the manifold bolts, turning them to 28 Nm (250 in. lbs.). After that, add the heat shield attaching nut and torque it to 12 Nm (105 in. lbs.) and lock everything in by plugging the battery negative cable.

OEM Chrysler Pacifica Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Exhaust Manifolds found

View related parts
Chrysler Pacifica Crossover Pipe Part Number: 4781042AF
$480.68 MSRP: $731.00
You Save: $250.32 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust Manifold; Exhaust Crossover Pipe; Exhaust Pipe; Cross Over Pipe; Crossover Exhaust Manifold
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Pacifica | Base, LX | 6 Cyl 3.8 L GAS
View related parts
Chrysler Pacifica Catalytic Converter, Driver Side Part Number: 5171141AC
$2065.20 MSRP: $3030.00
You Save: $964.80 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust And Catalytic Conve; Catalytic Converter with Integrated Exhaust Manifold, Left; Exhaust Manifold; Manifold; Manifold Exhaust And Catalytic Converter
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Chrysler Pacifica | LX, Limited, Touring | 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Catalytic Converter, Passenger Side Part Number: 5171140AC
$2340.00 MSRP: $3425.00
You Save: $1085.00 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust and Catalytic Converter; Right Catalytic Converter with Integrated Manifold.; Manifold
- Position: Passenger Side
- Replaces: 5171140AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Chrysler Pacifica | LX, Limited, Touring | 4.0L V6, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Catalytic Converter, Driver Side Part Number: 5171143AD
$943.68 MSRP: $1360.00
You Save: $416.32 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Catalytic; Catalytic Converter with Integrated Exhaust Manifold, Left; Exhaust Manifold; Manifold
- Position: Driver Side
- Replaces: 5171143AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Chrysler Pacifica | LX, Limited, Touring | 4.0L V6, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Exhaust Manifold, Driver Side Part Number: 4781041AC
$300.56 MSRP: $459.00
You Save: $158.44 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold; Manifold Exhaust
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Chrysler Pacifica | LX | 6 Cyl 3.8 L GAS
View related parts
Chrysler Pacifica Exhaust Manifold Part Number: 68184161AG
$1418.28 MSRP: $2080.00
You Save: $661.72 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter - Exhaust And Catalytic Converter; Catalytic Converter; Manifold W/Converter
- Replaces: 68184161AE, 68184161AB, 68184161AC, 68184161AD, 68184161AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2018 Chrysler Pacifica | L, LX, Limited, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Pacifica Exhaust Manifold Part Number: 68184158AD
$1418.28 MSRP: $2080.00
You Save: $661.72 (32%)
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust And Catalytic Conve; Catalytic Converter; Manifold W/Converter
- Replaces: 68184158AA, 68184158AB, 68184158AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2017-2018 Chrysler Pacifica | L, LX, Limited, Touring, Touring L, Touring L Plus, Touring Plus | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Pacifica Exhaust Manifold, Driver Side Part Number: 4781041AA
$197.24 MSRP: $255.00
You Save: $57.76 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Cross Over Pipe Gasket; Manifold; Manifold Exhaust Left; Manifold Exhaust
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chrysler Pacifica | Base, Limited, Touring | 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Pacifica Exhaust Manifold, Passenger Side Part Number: 4648954AB
$34.68 MSRP: $43.96
You Save: $9.28 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold Exhaust
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008 Chrysler Pacifica | LX | 6 Cyl 3.8 L GAS
View related parts
Chrysler Pacifica Exhaust Manifold, Passenger Side Part Number: 4648909AB
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold Exhaust
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chrysler Pacifica | Base, Limited, Touring | 6 Cyl 3.5 L GAS
View related parts
Chrysler Pacifica Exhaust Manifold, Driver Side Part Number: 4648908AC
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Left; Manifold Exhaust
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chrysler Pacifica | Base, Limited, Touring | 6 Cyl 3.5 L GAS
View related parts
Chrysler Pacifica Exhaust Manifold, Passenger Side Part Number: 4648954AA
Product Specifications
- Other Name: Manifold - Exhaust; Exhaust Manifold, Right; Manifold Exhaust Right; Manifold Exhaust
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chrysler Pacifica | Base | 6 Cyl 3.8 L GAS
View related parts
Chrysler Pacifica Crossover Pipe Part Number: 4648912AD
Product Specifications
- Other Name: Manifold - Exhaust Manifold; Exhaust Pipe; Cross Over Pipe; Crossover Exhaust Manifold
- Replaces: 4648912AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chrysler Pacifica | Base, Limited, Touring | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler Pacifica Crossover Pipe Part Number: 4781042AE
Product Specifications
- Other Name: Manifold - Exhaust Crossover; Exhaust Crossover Pipe; Exhaust Pipe; Cross Over Pipe; Crossover Exhaust Manifold; Pipe Exhaust Crossover
- Replaces: 4781042AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chrysler Pacifica | Base | 6 Cyl 3.8 L GAS

Chrysler Pacifica Exhaust Manifold

Choose OEM Exhaust Manifold that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Exhaust Manifold follows strict manufacturing steps to lock in quality and fit. If your Chrysler Pacifica matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Pacifica parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Pacifica Exhaust Manifold is a core part that greatly impacts its performance and smoothness of the car. This part is completely responsible for channelling hot exhaust gases from the engine to the exhaust system, all in the aim of enhancing performance while at the same time reducing emission levels. Chrysler Pacifica Exhaust Manifold is made from cast iron or stainless steel components that are heat and pressure resistant for superior durability. It can be seen in the compatibility with different Pacifica models ranging from the gasoline variant to the plug- in hybrid variant making the Chrysler brand very complete. Beside enhancing the flow of the exhaust gas the design of the Exhaust Manifold is also helpful to the welfare of the vehicle and its occupants by minimizing the tendency of the vehicle to overheat. Other nuances, including the number of tubes equal to the number of cylinders of the engine, contribute to increasing the velocity of exhaust gases, which also improves the engine's characteristics. Chrysler Pacific is one of the most acknowledged vehicles, therefore, it has been awarded, for example, as the "premier Minivan of 2016" and "2020 premier Family Car" on the grounds of quality and a number of performance characteristics. The Chrysler Pacifica Exhaust Manifold is an admirable version amongst the variety of automobiles in the market providing efficiency and a comfortable drive. In conclusion, the Exhaust Manifold is crucial for the continuous efficiency and safety of the Chrysler Pacifica that boosts it's reputation as one of the superior automobiles.

Chrysler Pacifica Exhaust Manifold Parts and Q&A

Crossover Pipe
4781042AF
Q: How to Properly Install an Exhaust Manifold on Chrysler Pacifica?
A:
With the exhaust manifold, put it in place on the cylinder head and add the bolts to the center runner (cylinder #4). Tighten the bolts to 2.8 Nm (25 in. lbs.) at first. Place a new gasket around the crossover pipe as you attach it to the exhaust manifold and tighten the bolts to 41 Nm (30 ft. lbs.). Then, carefully check the crossover pipe fasteners for heat and corrosion damage, since the bolts are a special type of stainless steel. After that, place the heat shield onto the manifold and attach and tighten the remaining manifold bolts to 28 Nm (250 in. lbs.) Nonetheless, the element you place needs to be safely secured on the manifold. Put on the heat shield attaching nut with 12 Nm (105 in. lbs.) of force and after that, join the negative cable from the battery.
Catalytic Converter, Driver Side
5171143AD
Q: How to Remove and Replace an Exhaust Manifold for Left on Chrysler Pacifica?
A:
Start by resting the exhaust manifold (2) onto the cylinder head and screw in the bolts to the middle runner (cylinder #4), tightening them to only 2.8 Newton meteres (25 inch-pounds). Next, set a new gasket on the manifold and attach the crossover pipe (1). Tighten the bolts to 41 Nm (30 ft. lbs.), inspect the crossover pipe fasteners closely for damage from heat and corrosion, since the crossover bolts are made of specially treated stainless steel and use only OEM bolts when making replacements. After that, fit the heat shield onto the manifold and fasten the rest of the manifold bolts, turning them to 28 Nm (250 in. lbs.). After that, add the heat shield attaching nut and torque it to 12 Nm (105 in. lbs.) and lock everything in by plugging the battery negative cable.