JeepParts
My Garage
My Account
Cart
OEM Chrysler Pacifica Spark Plug
Ignition Spark Plug- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Spark Plugs found
Chrysler Pacifica Spark Plug Part Number: SZFR5LP13G
$10.26 MSRP: $15.00You Save: $4.74 (32%)Ships in 1-2 Business Days
Chrysler Pacifica Spark Plug Part Number: SP303917AC
$11.40 MSRP: $16.70You Save: $5.30 (32%)Ships in 1-2 Business Days
Chrysler Pacifica Spark Plug Part Number: SP225755AB
$22.80 MSRP: $33.35You Save: $10.55 (32%)
Chrysler Pacifica Spark Plug
Choose OEM Spark Plug that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Spark Plug follows strict manufacturing steps to lock in quality and fit. If your Chrysler Pacifica matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Pacifica parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.
Chrysler Pacifica Spark Plug Parts and Q&A
- Q:How should you install Spark Plug(s) and spark plug cables in a 3.8L engine on Chrysler Pacifica?A:When exchanging the spark plugs and spark plug cables in the 3.8L engine, it is important to ensure the proper routing of the cables and placement in the retainers. Improper routing and placement can cause ignition noise, cross ignitions and shorts. Stand the spark plug vertically on the ground and apply the anti-seize on the top threads of the spark plug only. a little will be okay. Insert the spark plug into the cylinder head at first by hand to avoid cross threading and then tighten it to a torque of 17.5 Nm (13 ft. lbs.). The spark plug cables can now be installed once they have clicked firmly in place on the top of the spark plugs.
- Q:How to properly remove Spark Plug(s) and spark plug cables in a 3.8L engine on Chrysler Pacifica?A:While replacing the spark plugs and spark plug cables in a 3.8L engine, be sure the cables are routed properly and in the right retainers to prevent ignition noise, cross ignition, or shorting out. Always remove an individual cable by grasping the boot, rotating it 1/2 turn, and pulling straight back in a steady motion. Before removing the spark plug, use compressed air around the spark plug hole and surroundings. Using a good-quality socket with a foam insert, remove the spark plug and inspect its condition.
Related Chrysler Pacifica Parts
Chrysler Pacifica Camshaft Position Sensor
Chrysler Pacifica Crankshaft Position Sensor
Chrysler Pacifica Ignition Coil
Chrysler Pacifica Coolant Temperature Sensor
Chrysler Pacifica Engine Control Module
Chrysler Pacifica Igniter
Chrysler Pacifica Ignition Control Module
Chrysler Pacifica Intake Manifold Temperature Sensor
Chrysler Pacifica Knock Sensor
Chrysler Pacifica MAP Sensor
Chrysler Pacifica Oxygen Sensor
Chrysler Pacifica Throttle Position Sensor