How Are Air Ducts Installed for Floor Distribution on Chrysler PT Cruiser?

Slide the floor distribution duct into place and engage it with the intermediate floor duct near the rear and then with the outlet in the top HVAC housing. After placing screw 4 and tightening it to 2 Nm (17 in. lbs.), attach the instrument panel. On the left duct, guide it to the left hand side of the housing, lock it with the opening at the top and then put in the steering column covering. If you take out the intermediate floor duct, put the right rear one into the car and connect it to the right floor distribution duct. Subsequently, have the right rear floor duct placed over the vehicle, insert the end of the duct into the rear carpet and attach it with the right rear intermediate floor duct and the left rear floor duct. Attach the right rear floor duct to the floor panel with two screws, tightened to 2 Nm and set the push-pin retainer in place that will keep the rear carpet attached to the duct before you add the center console. Before engaging with the right rear floor duct, place the left rear floor duct on the vehicle, secure its rear into the carpet opening and do the same for the right back duct. Connect the left rear floor duct to the floor panel with two screws at 2 Nm (17 in. lbs.) and install the rear carpet push-pin retainer before fitting the center floor console.

How to Connect Air Ducts to Defroster and Demister Systems on Chrysler PT Cruiser?

At the back of the instrument panel, position the defroster duct 4, attach it with four screws 2 and tighten them to 2 Nm (3.09 ft. lbs.). Following this, link demister duct 1 with the right and duct 3 with the left and then put in the instrument panel assembly.

OEM Chrysler PT Cruiser Air Duct

Air Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Air Ducts found

View related parts
Chrysler PT Cruiser Hose Part Number: 4891406AD
$90.09 MSRP: $135.00
You Save: $44.91 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Clean Air; Engine Air Intake Hose; Intake Coupling; Hose Clean Air; Air Intake Hose
- Replaces: 4891406AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Chrysler PT Cruiser | Base, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Hose Part Number: 4891558AA
$55.97 MSRP: $83.95
You Save: $27.98 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Air Cleaner To Throttle Body; Engine Air Intake Hose; Intake Coupling; Hose Air Cleaner To Throttle Body; Air Intake Hose
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2010 Chrysler PT Cruiser | Base, Classic, Couture Edition, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Adapter Part Number: 5291447AA
$2.58 MSRP: $16.35
You Save: $13.77 (85%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Duct - Elbow; HVAC Duct Adapter; Duct Elbow
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler PT Cruiser | Base, Dream, Dream Cruiser, GT, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Air Duct, Lower Driver Side Part Number: 5179477AA
Product Specifications
- Other Name: Duct - A/C And Heater; Instrument Panel Air Duct, Left Lower; Cabin Air Intake Duct, Left; Instrument Panel Air Duct; Heater Duct; Floor Duct; Lower Duct; Duct A/C And Heater Left; Duct A/C And Heater
- Position: Lower Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chrysler PT Cruiser | Base, Classic, Couture Edition, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Adapter Part Number: 5058476AB
Product Specifications
- Other Name: Duct - Elbow; HVAC Duct Adapter; Duct Elbow
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chrysler PT Cruiser | Base, Classic, Couture Edition, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Center Duct Part Number: 5058339AB
Product Specifications
- Other Name: Duct - Air Distribution; Instrument Panel Air Duct, Center, Center Upper; Duct Air Distribution; Duct Air Outlet
- Position: Center
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chrysler PT Cruiser | Base, Classic, Couture Edition, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Air Duct, Lower Part Number: 5179483AA
Product Specifications
- Other Name: A/C And Heater; Right Lower Instrument Panel Air Duct; Cabin Air Intake Duct; Heater Duct; Floor Duct; Lower Duct; Duct A/C And Heater Right; Duct A/C And Heater
- Position: Lower
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chrysler PT Cruiser | Base, Classic, Couture Edition, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Air Duct, Passenger Side Part Number: 5058337AB
Product Specifications
- Other Name: Duct - Air Distribution; Instrument Panel Air Duct, Left, Right, Upper; Duct Air Distribution; Duct Air Outlet
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chrysler PT Cruiser | Base, Classic, Couture Edition, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler PT Cruiser Hose Part Number: 4891136AD
Product Specifications
- Other Name: Hose - Air Cleaner To Throttle Body; Engine Air Intake Hose; Intake Coupling; Hose Air Cleaner To Throttle Body; Air Intake Hose
- Replaces: 4891136AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler PT Cruiser | Base, Dream, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS

Chrysler PT Cruiser Air Duct

Choose OEM Air Duct that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Air Duct follows strict manufacturing steps to lock in quality and fit. If your Chrysler PT Cruiser matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine PT Cruiser parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler PT Cruiser Air Duct functions as an important system which enhances both the reliability features and operational performance of the Chrysler PT Cruiser. The Air Duct supports airflow intake alongside its air filter system by trapping harmful substances that protect the engine from damage during operation. The performance quality of the Air Duct stands as vital because any improper functioning allows unfiltered air into the engine which causes wear and degrades engine performance. The Air Duct operates together with various Chrysler PT Cruiser vehicles and activates a Mass Air Flow (MAF) sensor to measure entering air which enables the engine control system to optimize air/fuel mix properties that enhance operational performance. Engine performance reliability depends on this vital feature which ensures protection against lean operation conditions that would negatively impact the system. The Chrysler PT Cruiser Air Duct extends the lifetime of the engine and provides essential safety benefits through its operation of maintaining proper engine functions. The innovative design spirit of Chrysler enabled the creation of an air duct that balances advanced functionality with vintage styling elements which make it appealing to passionate drivers. The Chrysler PT Cruiser earned its dedicated following through its one million units production while its Air Duct component has emerged as a key factor behind its well-known reliability and performance traits in the automotive sector.

Chrysler PT Cruiser Air Duct Parts and Q&A

Hose
4891558AA
Q: How Are Air Ducts Installed for Floor Distribution on Chrysler PT Cruiser?
A:
Slide the floor distribution duct into place and engage it with the intermediate floor duct near the rear and then with the outlet in the top HVAC housing. After placing screw 4 and tightening it to 2 Nm (17 in. lbs.), attach the instrument panel. On the left duct, guide it to the left hand side of the housing, lock it with the opening at the top and then put in the Steering Column Covering. If you take out the intermediate floor duct, put the right rear one into the car and connect it to the right floor distribution duct. Subsequently, have the right rear floor duct placed over the vehicle, insert the end of the duct into the rear carpet and attach it with the right rear intermediate floor duct and the left rear floor duct. Attach the right rear floor duct to the floor panel with two screws, tightened to 2 Nm and set the push-pin retainer in place that will keep the rear carpet attached to the duct before you add the center console. Before engaging with the right rear floor duct, place the left rear floor duct on the vehicle, secure its rear into the carpet opening and do the same for the right back duct. Connect the left rear floor duct to the floor panel with two screws at 2 Nm (17 in. lbs.) and install the rear carpet push-pin retainer before fitting the center floor console.
Hose
4891406AD
Q: How to Connect Air Ducts to Defroster and Demister Systems on Chrysler PT Cruiser?
A:
At the back of the instrument panel, position the defroster duct 4, attach it with four screws 2 and tighten them to 2 Nm (3.09 ft. lbs.). Following this, link demister duct 1 with the right and duct 3 with the left and then put in the instrument panel assembly.