OEM Chrysler PT Cruiser Convertible Top Motor

Chrysler PT Cruiser Convertible Top Motor Parts and Q&A

• Motor & Pump
  5127344AB
  Q: How to Install a Convertible Top Motor on Chrysler PT Cruiser?

  A:

  For the convertible top motor installation, put the hydraulic pump/motor into place in the vehicle and mount the hydraulic cylinders onto the main pivot brackets using two bolts per cylinder. After marking the holes on the bracket, position it at your previous marks and install three bolts and two nuts. Fasten the hydraulic pump/motor assembly to the top of the shelf panel using two nuts and assure they are tightly secured. Clamp the hydraulic hoses and wire harness to the chassis with six retaining clips and link the convertible top harness to the main body harness. Boards are 6-3/4" x 9-1/4" x 10-1/2". Firmly place the convertible top well liner in the car and pin it to the back of the seat and to the shell. Put in the rear seat back, interior quarter trim panels and rear Seat Cushion. Last, attach the negative Battery Cable again.