How to install the rear Bumper Cover on a Sedan on Chrysler Sebring?

To install the rear bumper fascia on a Sebring Sedan, first make sure that the energy management foam is properly installed in the rear fascia. Place the fascia on the vehicle and push it forward to seat the hooks attaching the fascia to the bottom of the quarter panel. After that, push-in fasteners to fasten the center of the fascia to the trunk opening. Followed by screws fastening the fascia to the quarter panel at the wheelhouse opening. The final step is to install the lower fascia fasteners and the fasteners that attach to the wheelhouse.

How to remove the rear Bumper Cover (fascia) on Chrysler Sebring?

To begin removing the rear bumper cover, first unlock the decklid latch and open the decklid. Remove the three push-in fasteners located at the center of the fascia secured to the rear closure panel. Next, remove the two wheelhouse fasteners and pull back the splash shields to expose the hidden fastener which attaches the fascia to the fender. Subsequently, detach the lower fascia fasteners in pairs. To remove the fascia, pull it toward the rear of the vehicle, releasing the hooks that hold it against the bottom of the quarter panel.

OEM Chrysler Sebring Bumper Cover

Bumper Shell

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

32 Bumper Covers found

View related parts
Chrysler Sebring Bumper Cover, Front Part Number: 68004586AE
$477.47 MSRP: $696.00
You Save: $218.53 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front Includes Absorber
- Position: Front
- Replaces: 68004586AD, 68004586AC, 68004586AB, 68004586AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, Limited, LX, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Bumper Cover, Rear Part Number: 4805449AC
$420.22 MSRP: $612.00
You Save: $191.78 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Rear; Bumper Cover, Rear; Fascia Rear Primed
- Position: Rear
- Replaces: 4805449AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base, GTC, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Bumper Cover, Front Part Number: 68004594AD
$484.34 MSRP: $707.00
You Save: $222.66 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front Includes Absorber
- Position: Front
- Replaces: 68004594AB, 68004594AA, 68004594AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, Limited, LX, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Bumper Cover, Front Part Number: MR296446
$206.31 MSRP: $261.54
You Save: $55.23 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia - Front Bumper; Face Package Front Bumper
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Chrysler Sebring | LX, LXi | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Bumper Cover, Front Part Number: MR516340
Product Specifications
- Other Name: Fascia; Bumper Cover, Front; Bumper Fascia Front
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Sebring | LX, LXi | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Bumper Cover Part Number: 4695148
Product Specifications
- Other Name: Cup - Jounce Bumper Stop; Cup; Cup Shock Absorber Stop; Cup, Jounce Bumper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Sebring | JX, JXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Bumper Cover, Front Part Number: MR208265
Product Specifications
- Other Name: Face, Front Bumper (Primary Coat)
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chrysler Sebring | LX, LXi | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Bumper Cover, Rear Part Number: MR990730
Product Specifications
- Other Name: Fascia - Rear Bumper; Bumper Cover, Rear; Face Rear Bumper
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Chrysler Sebring | Base, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Bumper Cover, Front Part Number: MR990728
Product Specifications
- Other Name: Fascia - Front Bumper; Bumper Cover, Front; Face Front Bumper
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2005 Chrysler Sebring | Base, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Bumper Cover, Rear Part Number: MR516342
Product Specifications
- Other Name: Fascia; Bumper Cover, Rear; Bumper Fascia Rear
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Sebring | LX, LXi | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Bumper Cover, Black, Front Part Number: MR511999
Product Specifications
- Other Name: Cover - Fascia; Jack Plug Cover, Front; Cover Fascia Black; Cover Fascia
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Sebring | LX, LXi | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Bumper Cover Part Number: MR296450
Product Specifications
- Other Name: Fascia; Face Package Rear Bumper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Chrysler Sebring | LX, LXi | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Bumper Cover, Rear Part Number: MR208266
Product Specifications
- Other Name: Fascia Rear Bumper; Face, Rear Bumper (Primary Coat)
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chrysler Sebring | LX, LXi | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Bumper Cover, Front Part Number: 5288084
Product Specifications
- Other Name: Front Bumper Cover; Fascia Front Primed
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Sebring | JX, JXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Bumper Cover, Rear Part Number: 5152057AB
Product Specifications
- Other Name: Fascia - Rear; Bumper Cover, Rear; Fascia Rear Primed
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006 Chrysler Sebring | Base, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Bumper Cover, Front Part Number: 4805255AB
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front Primed
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Sebring | LX, LXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Bumper Cover, Front Part Number: 4805906AB
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front Primed
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chrysler Sebring | Base, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Bumper Cover, Front Part Number: 4805904AB
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front Primed
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chrysler Sebring | Base, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Bumper Cover, Front Part Number: 4805438AB
Product Specifications
- Other Name: Fascia - Front; Bumper Cover, Front; Fascia Front Primed
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Sebring | GTC, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Bumper Cover, Rear Part Number: 5073329AA
Product Specifications
- Other Name: Fascia - Rear; Bumper Cover, Rear; Fascia Rear Primed
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS

| Page 1 of 2 |Next >

1-20 of 32 Results

Chrysler Sebring Bumper Cover

Choose OEM Bumper Cover that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Bumper Cover follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Chrysler Sebring Bumper Cover is basically a soft outer panel that covers the hard bumper. Besides enhancing the appearance of a vehicle, a Bumper Cover can also help in aerodynamics, which in turn improves speed and fuel efficiency. The Bumper Cover makes up part of a multi-piece assembly that may also include grilles, light bezels, inserts, and trim pieces. However, the Bumper Cover is the outermost shield preventing the components behind it from being seen. It may have openings for airflow to the radiator, oil coolers, power steering coolers, or brakes. It may also have bumper-mounted lighting that is fog, parking, turn signal, or cornering. To ensure a smooth surface, decorative covers are installed to conceal any unused light or tow hook opening. When a collision or road debris strikes, the component often takes the brunt of the visible damage. Weather may cause the part to fade or crack, which means it will need replacing to keep your car looking tidy and still doing its job. Inserts and covers, although affixed to the same zone, are usually supplied separately from the Chrysler Sebring's main Bumper Cover. A Chrysler original style insert or cover helps the Sebring body lines stay consistent. Each Bumper Cover provides matching mounting points. Each Chrysler Sebring is improved by this alignment.

Chrysler Sebring Bumper Cover Parts and Q&A

Bumper Cover, Rear
68004623AB
Q:
How to install the rear Bumper Cover on a Sedan on Chrysler Sebring?
A:
To install the rear bumper fascia on a Sebring Sedan, first make sure that the energy management foam is properly installed in the rear fascia. Place the fascia on the vehicle and push it forward to seat the hooks attaching the fascia to the bottom of the quarter panel. After that, push-in fasteners to fasten the center of the fascia to the trunk opening. Followed by screws fastening the fascia to the quarter panel at the wheelhouse opening. The final step is to install the lower fascia fasteners and the fasteners that attach to the wheelhouse.
Bumper Cover, Rear
68004596AD
Q:
How to remove the rear Bumper Cover (fascia) on Chrysler Sebring?
A:
To begin removing the rear bumper cover, first unlock the decklid latch and open the decklid. Remove the three push-in fasteners located at the center of the fascia secured to the rear closure panel. Next, remove the two wheelhouse fasteners and pull back the splash shields to expose the hidden fastener which attaches the fascia to the fender. Subsequently, detach the lower fascia fasteners in pairs. To remove the fascia, pull it toward the rear of the vehicle, releasing the hooks that hold it against the bottom of the quarter panel.