How to install a Hood Hinge on Chrysler Sebring?

If required, paint the hood's new hinge first. Insert the hinge into position on the vehicle and attach it to the load beam inner with two bolts. Then, attach the hood to the hinge by putting in three bolts. Set the marks on all the bolts and tighten them to 15 Nm (11 ft. lbs.). Connect the hood so that there is a 4 mm (0.160 in.) gap to the front fenders and the hood is straight on the top of the fenders. Shims can help you reach the correct gapping. Once done, attach the cowl cover and ensure the hood closes and locks correctly.

How to Service and Repair a Hood Hinge on Chrysler Sebring?

To do the service and repair, first lift the hood on the side with the broken hinge. Guide marks can be placed at the corner of each hinge with a grease pencil or a different marking device. After that, detach the cowl cover and then unbolt the three that secure the hood to the hinges. After that, withdraw the bolt securing the hood hinge to the load beam inside and remove the hinge from the car.

OEM Chrysler Sebring Hood Hinge

Hood Bracket Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Hood Hinges found

View related parts
Chrysler Sebring Hinge, Front Lower Driver Side Part Number: 5155813AA
$52.26 MSRP: $76.25
You Save: $23.99 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Left, Front Left Lower; Hinge Hood Body Half
- Position: Front Lower Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Hinge, Front Passenger Side Part Number: 5155812AA
$54.09 MSRP: $76.25
You Save: $22.16 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Right, Front Right Lower; Hinge Hood Body Half
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Hinge, Front Passenger Side Part Number: 5074058AD
$47.70 MSRP: $70.75
You Save: $23.05 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Right, Front Right Upper; Hinge Hood Hood Half
- Position: Front Passenger Side
- Replaces: 5074058AC, 5074058AA, 5074058AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Hinge, Front Driver Side Part Number: 5074059AD
$39.89 MSRP: $80.60
You Save: $40.71 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Left, Front Left Upper; Hinge Hood Hood Half
- Position: Front Driver Side
- Replaces: 5074059AC, 5074059AA, 5074059AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Hinge Part Number: 4724321
$42.21 MSRP: $53.51
You Save: $11.30 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hinge, Hood, Right; Hinge Hood
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Sebring | JX, JXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Hinge, Front Passenger Side Part Number: 5905A028
$0.87 MSRP: $6.10
You Save: $5.23 (86%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Right
- Position: Front Passenger Side
- Replaces: MR358576
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, LX, LXi, Limited | 2.4L L4, 3.0L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Hinge, Front Driver Side Part Number: 5905A027
$7.44 MSRP: $52.50
You Save: $45.06 (86%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Left
- Position: Front Driver Side
- Replaces: MR358575
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, LX, LXi, Limited | 2.4L L4, 3.0L V6, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Hinge, Front Passenger Side Part Number: 4814770AG
$27.94 MSRP: $51.30
You Save: $23.36 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Right; Hinge Hood
- Position: Front Passenger Side
- Replaces: 4814770AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Hinge Part Number: MB401305
$32.88 MSRP: $41.68
You Save: $8.80 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hinge, Hood; Hinge Hood
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chrysler Sebring | LX, LXi | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Hinge, Front Driver Side Part Number: 4814771AG
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Left; Hinge Hood
- Position: Front Driver Side
- Replaces: 4814771AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Hinge Part Number: MB401306
Product Specifications
- Other Name: Hinge - Hood; Hinge, Hood; Hinge Hood
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Chrysler Sebring | LX, LXi | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Hinge Part Number: 4724320
Product Specifications
- Other Name: Hinge - Hood; Hinge, Hood, Right; Hinge Hood
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Sebring | JX, JXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS

Chrysler Sebring Hood Hinge

Choose OEM Hood Hinge that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Hood Hinge follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Through its role in supporting the hood the Chrysler Sebring Hood Hinge demonstrates its ability to ensure reliability and performance within Chrysler mid-size vehicles. The design of the hood hinge on the Sebring includes two components which carry hood weight and provide convenient engine access during every Sebring iteration. The hood hinge of your Sebring will deteriorate because of normal wear so you need to maintain it frequently to keep the car operating safely. Constructions of the Hood Hinge fit multiple Chrysler Sebring versions because it ensures vehicle integrity. Customers can easily fix these simple components because their replacement costs range between $10 and $90 with a quick installation procedure that enhances the overall driving experience. The Chrysler Sebring Hood Hinge demonstrates exceptional popularity in the automotive sector because of its durable framework and design which both supports the hood structure and enhances vehicle aerodynamics. The hood staying locked in place helps both fuel efficiency and safety performance while the vehicle travels. The Chrysler automobile has existed for 16 years during which time it evolved continually as the reliable hood hinge demonstrates the manufacturer's dedication to product quality. The Chrysler car Hood Hinge serves as a vital element of the model's production because it strengthens both driving performance and safety performance while sustaining reliability standards.

Chrysler Sebring Hood Hinge Parts and Q&A

Hinge, Front Passenger Side
5074058AD
Q: How to install a Hood Hinge on Chrysler Sebring?
A:
If required, paint the hood's new hinge first. Insert the hinge into position on the vehicle and attach it to the load beam inner with two bolts. Then, attach the hood to the hinge by putting in three bolts. Set the marks on all the bolts and tighten them to 15 Nm (11 ft. lbs.). Connect the hood so that there is a 4 mm (0.160 in.) gap to the front fenders and the hood is straight on the top of the fenders. Shims can help you reach the correct gapping. Once done, attach the cowl cover and ensure the hood closes and locks correctly.
Hinge, Front Driver Side
5074059AD
Q: How to Service and Repair a Hood Hinge on Chrysler Sebring?
A:
To do the service and repair, first lift the hood on the side with the broken hinge. Guide marks can be placed at the corner of each hinge with a grease pencil or a different marking device. After that, detach the cowl cover and then unbolt the three that secure the hood to the hinges. After that, withdraw the bolt securing the hood hinge to the load beam inside and remove the hinge from the car.