How to service and repair the Front Door Striker latch on Chrysler Sebring?

To service and repair the front door latch striker, start by marking the outline of door latch striker on the B-pillar to aid reinforcement installation. Take off the screws that fasten the door latch striker to the B-pillar. Remove the door latch striker from the vehicle. Inspect for any shims in between the door latch striker and the B-pillar. If shims are found, the same must be installed in the new door latch striker for proper functioning of the door. For installation, locate on the vehicle the door latch striker and any shims, then loosely install the screws attaching the latch striker to the B-pillar. Position the latch striker in accordance with the previous marking on the B-pillar and tighten the fasteners. Essentially, check the door fit and operation whilst adjusting the door latch striker as required.

OEM Chrysler Sebring Front Door Striker

Front Door Lock Striker

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Front Door Strikers found

View related parts
Chrysler Sebring Striker, Front Part Number: 4520288
Product Specifications
- Other Name: Striker - Door Latch; Door Lock Striker Plate, Front; Striker Assembly, Door Latch; Front, Rear, and Door Strikers; Latch options available.
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1998 Chrysler Sebring | JX, JXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Striker, Front Part Number: 4878826AC
Product Specifications
- Other Name: Striker - Door; Liftgate Lock Striker Plate, Rear; Front & Rear Door Lock Striker Plates; Rear Tailgate Striker Plate; Striker Door
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Striker, Front Part Number: MB867059
Product Specifications
- Other Name: Striker - Door; Door Lock Striker Plate, Front; Door Lock Striker Pin, Front; Striker, Front Door Latch; Striker Door
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chrysler Sebring | Base, LX, LXi, Limited | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS

Chrysler Sebring Front Door Striker

Choose OEM Front Door Striker that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Front Door Striker follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Sebring Front Door Striker Parts and Q&A

Striker, Front
4878826AC
Q:
How to service and repair the Front Door Striker latch on Chrysler Sebring?
A:
To service and repair the front door latch striker, start by marking the outline of door latch striker on the B-pillar to aid reinforcement installation. Take off the screws that fasten the door latch striker to the B-pillar. Remove the door latch striker from the vehicle. Inspect for any shims in between the door latch striker and the B-pillar. If shims are found, the same must be installed in the new door latch striker for proper functioning of the door. For installation, locate on the vehicle the door latch striker and any shims, then loosely install the screws attaching the latch striker to the B-pillar. Position the latch striker in accordance with the previous marking on the B-pillar and tighten the fasteners. Essentially, check the door fit and operation whilst adjusting the door latch striker as required.