How to Service an Oil Cooler on Chrysler Sebring?

An engine oil cooler should be serviced by putting the vehicle on a hoist and emptying out the cooling system. Subsequently, take off the oil cooler hoses from the coolant hotels, pull off the oil filter with number 3 and remove the oil cooler bolt which has number 2. Removing the oil cooler with part number 1, you should note that oil coolers cannot be cleaned and must be replaced if the engine needs rebuilding or a replacement.

How to Install an Oil Cooler on Chrysler Sebring?

Before installing the engine oil cooler, make sure to change the oil cooler seal. Add lubricant to the seal and slide the oil cooler onto the oil filter adapter, so that the notch matches the tab. Now, put in the oil cooler connector bolt and tighten it until it reaches 49 Nm (36 ft. lbs.). Then, set the oil filter in place and link the oil cooler coolant hose. After that, bring the vehicle back down to earth and add coolant to the system.

OEM Chrysler Sebring Oil Cooler

Engine Oil Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Oil Coolers found

View related parts
Chrysler Sebring Oil Cooler Part Number: 4884757AE
$103.32 MSRP: $155.00
You Save: $51.68 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler - Engine Oil; Engine Oil Cooler; Cooler Engine Oil
- Replaces: 4884757AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Transmission Cooler Part Number: 4856561
Product Specifications
- Other Name: Cooler - Auxiliary Oil; Oil Cooler Line; Cooler; Cooler, Oil, Auxiliary; Cooler Auxiliary Oil
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Sebring | JX, JXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Oil Cooler Part Number: 4892377AA
Product Specifications
- Other Name: Cooler - Engine Oil; Engine Oil Cooler
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Sebring | Base, LX, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Oil Cooler Part Number: 4892377AB
Product Specifications
- Other Name: Cooler - Engine Oil; Cooler Engine Oil
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chrysler Sebring | LX, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

Chrysler Sebring Oil Cooler

Choose OEM Oil Cooler that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Oil Cooler follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Spoiler of Chrysler Sebring and Dodge Avenger vehicles serves to cool the engine oil where its temperature is supposed to be monitored to help it's maintain the proper viscosity and hence run properly. These coolers are in fact an oil-to-water cooler, which means it becomes a part of the car's cooling system and is thus able to bring the oil up to the maximum temperature while avoiding excessive heat. Throughout the lifetime of Chrysler Sebring, numerous types and designs of Oil Coolers have been used with the primary focus of stating factory fitted systems. However, when put under pressure such as when towing or driving under high temperatures and the like the OE coolers may be inadequate. Problems like blockage and rusting can reduce their efficiency and result to instance oil contamination. Those that are struggling with coolers failure or do not have an oil cooler can always opt for the kits and parts which will help improve the cooling capability and increase the durability of the engine.

Chrysler Sebring Oil Cooler Parts and Q&A

Oil Cooler
4884757AE
Q: How to Service an Oil Cooler on Chrysler Sebring?
A:
An engine oil cooler should be serviced by putting the vehicle on a hoist and emptying out the cooling system. Subsequently, take off the oil cooler hoses from the coolant hotels, pull off the Oil Filter with number 3 and remove the oil cooler bolt which has number 2. Removing the oil cooler with part number 1, you should note that oil coolers cannot be cleaned and must be replaced if the engine needs rebuilding or a replacement.
Oil Cooler
4892377AA
Q: How to Install an Oil Cooler on Chrysler Sebring?
A:
Before installing the engine oil cooler, make sure to change the oil cooler seal. Add lubricant to the seal and slide the oil cooler onto the Oil Filter adapter, so that the notch matches the tab. Now, put in the oil cooler connector bolt and tighten it until it reaches 49 Nm (36 ft. lbs.). Then, set the oil filter in place and link the oil cooler coolant hose. After that, bring the vehicle back down to earth and add coolant to the system.