The D-pillar speaker can be removed by first unlinking and isolating the negative battery cable, taking out the right side's rear header trim, the jack cover from the left panel, the liftgate scuff plate and the top seat belt bolt. Remove part of the quarter trim to get to the speaker, slide the speaker free of its retainer and remove the connector on the wire harness. First, remove the negative cable from the battery, remove the front door panel, unscrew the speaker and take the connector from its wire harness before you take out the speaker. Start by disconnecting the negative battery cable, removing the A-pillar covers, instrument panel pad and screwing the speaker. After that, remove the wire harness from the speaker and remove it. Before handling the quarter panel speaker, remove the battery negative cable, take off the quarter panel trim piece, remove the screws holding the speaker, unplug the wire harness from the speaker and pull out the speaker.