How to Ensure Proper Maintenance and Installation of a Drive Belt on a Poly-V Belt System on Chrysler Town & Country?

Make sure to clean all foreign items out of the belt pulley grooves before installing the drive belt and make sure the pulleys are free of oil, grease and coolants. If wear on the belt is severe, the cords are damaged or there is a lot of glazing, the belt must be replaced. While minor cracking of the ribbed side on a Poly-V Belt is normal, any crack running parallel to the ribbed side should not be there. Belt dressing or restorer should never be used on your Poly-V Belts.

How to Maintain and Fix a Drive Belt on Chrysler Town & Country?

Begin by supporting the vehicle on a hoist, after which remove the drive belt shield before carrying out any service work. Making sure the drive belt tensioner does not snap back could prevent any affect on the belt tensioner or hurt you. Slide a wrench onto the tensioner little and rotate the tensioner counterclockwise to lose tension. Lift the drive belt and gently lower the tensioner as though it had never been touched. Before placing the new belt, remove all gunk including grease, coolant and dirt from the pulley grooves. You should replace the belt if the wear made by the cord is too noticeable, the cords are frayed at the edges or if the belt is severely glazed. Small cracks found along the ribbed side of a Poly-V Belt system are usual when resulting from reverse bending, while parallel cracks should not be present. Do not put any dressing or restorer on Poly-V Belts. Guide the drive belt onto all pulleys; don't put it on the crankshaft yet. After tightening the tensioner, rotate it back a few times counterclockwise so the belt can fit over the crankshaft pulley and then gently release the tensioner. Make sure the belt goes through all the pulleys correctly, install the shield and then bring the car down.

OEM Chrysler Town & Country Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Drive Belts found

View related parts
Chrysler Town & Country Serpentine Belt Part Number: 5184442AC
$48.21 MSRP: $71.45
You Save: $23.24 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chrysler Town & Country | 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Town & Country Serpentine Belt Part Number: 4891875AA
$54.51 MSRP: $81.10
You Save: $26.59 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Town & Country | Limited, Touring, Touring Plus | 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Serpentine Belt Part Number: 4593852AB
$42.92 MSRP: $61.70
You Save: $18.78 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
- Replaces: 4593852AA, 4593665AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Town & Country | LX, Touring, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Serpentine Belt Part Number: 4612828
$28.85 MSRP: $37.14
You Save: $8.29 (23%)
ADD TO CART
Product Specifications
- Other Name: Belt; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt, Drive, 3.3L-3.8L Engine; Belt Accessory Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Town & Country | Base, LX, LXi, Limited, SX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Serpentine Belt Part Number: 55111074AC
$24.19 MSRP: $48.85
You Save: $24.66 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap - Coolant Recovery Bottle; Engine, Washer, Radiator Caps; Serpentine & V-Belts; Reservoir Cap; Filler Cap; Reservoir Tank Cap; Recovery Tank Cap; Cap
- Replaces: 55111074AA, 4682828, 5017468AA, 55111074AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-2016 Chrysler Town & Country | 30th Anniversary Edition, Base, EL, EX, Limited, Limited Platinum, LX, LXi, S, SX, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.5L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Serpentine Belt Part Number: 4798386
$31.30 MSRP: $39.67
You Save: $8.37 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Drive With A/C; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Belt
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-1992 Chrysler Town & Country | Base | 6 Cyl 3.3 L GAS
View related parts
Chrysler Town & Country Serpentine Belt Part Number: 4593684AA
$57.39 MSRP: $84.40
You Save: $27.01 (32%)
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Replaces: 4861322AC, 68060352AA, 4892840AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2007 Chrysler Town & Country | Base, EL, EX, Limited, LX, LXi, Touring | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Serpentine Belt Part Number: 5086140AB
$22.56 MSRP: $32.40
You Save: $9.84 (31%)
Product Specifications
- Other Name: Belt - Accessory Drive; Drive Belt
- Replaces: 5086140AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Town & Country | Base, Limited, LX, LXi, SX | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Serpentine Belt Part Number: Q4060987
Product Specifications
- Other Name: Belt - Qd1 Ribbed Belt; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Belt, Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1995 Chrysler Town & Country | Base | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Serpentine Belt Part Number: Q4060978
Product Specifications
- Other Name: Belt - Accessory Drive; Belt, Drive, 3.3L-3.8L Engine; Belt, Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-1995 Chrysler Town & Country | Base | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country A/C Belt Part Number: B0015491
Product Specifications
- Other Name: Belt; Serpentine Belt Drive Kit; Serpentine Belt; Drive Belt; V-Belt; Belt, Air Condition Drive; Belt, A/C Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1987-1988 Chrysler Town & Country | Base | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
View related parts
Chrysler Town & Country A/C Belt Part Number: B0015475
Product Specifications
- Other Name: Belt, A/C. Compressor Drive W/2.2L Engine; Belt; Belt, A/C Drive 47.80" Oversize Length (B0015475); Belt, Air Condition Drive; Belt, A/C Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1986 Chrysler Town & Country | Base, Mark Cross | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
View related parts
Chrysler Town & Country Power Steering Belt Part Number: B0013421
Product Specifications
- Other Name: Belt - Drive; Belt; Belt, Power Steering Drive
- Replaces: JY013421
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chrysler Town & Country | Base, Mark Cross | 4 Cyl 2.6 L GAS
View related parts
Chrysler Town & Country Drive Belt Part Number: B0013431AB
Product Specifications
- Other Name: Belt - Power Steering; Serpentine Belt Drive Kit; Serpentine Belt; V-Belt; Alternator Belt; Fan Belt; Power Steering Belt; Belt
- Replaces: JY013431, JY013432, B0013431
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-1995 Chrysler Town & Country | 3.0L V6, 3.3L V6, 3.8L V6
- 1984-1988 Chrysler Town & Country | Base, Mark Cross | 2.2L L4, 2.5L L4, 2.6L L4, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS
View related parts
Chrysler Town & Country Serpentine Belt Part Number: Q4060987AB
Product Specifications
- Other Name: Belt - Qd1 Ribbed Belt; Serpentine Belt Drive Kit; Drive Belt; V-Belt
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1995 Chrysler Town & Country | Base | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

Chrysler Town & Country Drive Belt

Choose OEM Drive Belt that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Drive Belt follows strict manufacturing steps to lock in quality and fit. If your Chrysler Town & Country matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Town & Country parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The drive belt in Chrysler town and country is important for linking the 'parts' to the engine amongst them being alternator and A/C compressor. Usually a serpentine belt is used on the above parts and connects the crankshaft pulley towards all the other parts. This Drive Belt normally lasts approximately 105000 Km, however, if signs of premature wear out are detected, it needs to be changed immediately to prevent serious problems in the engine and parts. Throughout the years, Chrysler Town & Country has had a variety of Drive Belts such that V-belts and multi-groove belts which improve on the level of traction and efficiency and reduce slippage. These Drive Belts have undergone some improvements over the years and these improvements due to technology have to do with the way these Drive Belts would perform and be compatible to the different mechanical systems that are in place.

Chrysler Town & Country Drive Belt Parts and Q&A

Serpentine Belt
4593684AA
Q:
How to Ensure Proper Maintenance and Installation of a Drive Belt on a Poly-V Belt System on Chrysler Town & Country?
A:
Make sure to clean all foreign items out of the belt pulley grooves before installing the drive belt and make sure the pulleys are free of oil, grease and coolants. If wear on the belt is severe, the cords are damaged or there is a lot of glazing, the belt must be replaced. While minor cracking of the ribbed side on a Poly-V Belt is normal, any crack running parallel to the ribbed side should not be there. Belt dressing or restorer should never be used on your Poly-V Belts.
Serpentine Belt
55111074AC
Q:
How to Maintain and Fix a Drive Belt on Chrysler Town & Country?
A:
Begin by supporting the vehicle on a hoist, after which remove the drive belt shield before carrying out any service work. Making sure the drive Belt Tensioner does not snap back could prevent any affect on the belt tensioner or hurt you. Slide a wrench onto the tensioner little and rotate the tensioner counterclockwise to lose tension. Lift the drive belt and gently lower the tensioner as though it had never been touched. Before placing the new belt, remove all gunk including grease, coolant and dirt from the pulley grooves. You should replace the belt if the wear made by the cord is too noticeable, the cords are frayed at the edges or if the belt is severely glazed. Small cracks found along the ribbed side of a Poly-V Belt system are usual when resulting from reverse bending, while parallel cracks should not be present. Do not put any dressing or restorer on Poly-V Belts. Guide the drive belt onto all pulleys; don't put it on the crankshaft yet. After tightening the tensioner, rotate it back a few times counterclockwise so the belt can fit over the crankshaft pulley and then gently release the tensioner. Make sure the belt goes through all the pulleys correctly, install the shield and then bring the car down.

Related Chrysler Town & Country Parts

Browse Chrysler Town & Country Drive Belt by Years

2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1988 1987 1986 1985 1984

OEM Chrysler Town & Country Drive Belt

15 Drive Belts found

Chrysler Town & Country Serpentine Belt Part Number: 5184442AC

Chrysler Town & Country Serpentine Belt Part Number: 4891875AA

Chrysler Town & Country Serpentine Belt Part Number: 4593852AB

Chrysler Town & Country Serpentine Belt Part Number: 4612828

Chrysler Town & Country Serpentine Belt Part Number: 55111074AC

Chrysler Town & Country Serpentine Belt Part Number: 4798386

Chrysler Town & Country Serpentine Belt Part Number: 4593684AA

Chrysler Town & Country Serpentine Belt Part Number: 5086140AB

Chrysler Town & Country Serpentine Belt Part Number: Q4060987

Chrysler Town & Country Serpentine Belt Part Number: Q4060978

Chrysler Town & Country A/C Belt Part Number: B0015491

Chrysler Town & Country A/C Belt Part Number: B0015475

Chrysler Town & Country Power Steering Belt Part Number: B0013421

Chrysler Town & Country Drive Belt Part Number: B0013431AB

Chrysler Town & Country Serpentine Belt Part Number: Q4060987AB

Chrysler Town & Country Drive Belt

Chrysler Town & Country Drive Belt Parts and Q&A

Related Chrysler Town & Country Parts

Browse Chrysler Town & Country Drive Belt by Years