How to Install a Radiator Support on Chrysler Town & Country?

Make sure you attach the Vehicle Emission Control Information (VECI) label to the component if replacing a crossmember. Install the hood latch cable onto the crossmember at the beginning. The radiator crossmember (2) should be placed on the car so that the paint breaks above the bolt heads are matched up. Use bolts (1) to connect the crossmember to the body, then tighten them to 19 Nm (14 ft. lbs.) of torque. Attachment the hood latch cable (2) to the hood latch (1). Align the hood latch with the holes and paint breaks around the bolts, then fasten the bolts to 13.5 Nm (10 ft. lbs.) torque. After that, attach the two crossmember brace bolts (2) and tighten them to 19 Nm (14 ft. lbs.) torque. After that, put in the grille push pins (2) and fastener bolts (3) and make sure the hood latch is working and the hood is level.

How to Remove the Radiator Support on Chrysler Town & Country?

To take out the radiator upper crossmember, first pull open the hood latch and raise the hood. After that, loosen the radiator sight shield and remove the engine air inlet resonator. Detach the hood cable from the upper radiator crossmember and then take out the bolts connecting the latch to that place. Pull out the hood prop rod and unscrew the screw locating the coolant recovery bottle to the crossmember. After removing the bolts holding the radiator isolators to the crossmember, pull out the bolts attaching the ends of the crossmember to the radiator closure panel. Pull the crossmember upward and away from the resealed radiator panel, then take it out of the vehicle.

OEM Chrysler Town & Country Radiator Support

Center Radiator Support

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Radiator Supports found

View related parts
Chrysler Town & Country Support Brace Part Number: 68023328AA
$47.98 MSRP: $82.35
You Save: $34.37 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brace - Radiator Closure Panel; Radiator Support Panel Brace; Brace Radiator Closure Panel Right Or Left; Brace Radiator Closure Panel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2016 Chrysler Town & Country | 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Radiator Support, Front Part Number: 68023326AE
$541.59 MSRP: $789.00
You Save: $247.41 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel - Radiator Closure; Radiator Support Panel, Front; Panel Radiator Closure
- Position: Front
- Replaces: 68023326AC, 68023326AB, 68023326AD, 68023326AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2016 Chrysler Town & Country | 30th Anniversary Edition, Limited, Limited Platinum, LX, S, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Isolator Mount Bracket, Front Driver Side Part Number: 68373035AA
$38.22 MSRP: $54.95
You Save: $16.73 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Crossmember; Suspension Subframe Reinforcement Bracket, Front Left, Front Right; Bracket Crossmember
- Position: Front Driver Side
- Replaces: 4721619AF, 4721619AC, 4721619AD, 4721619AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2016 Chrysler Town & Country | 30th Anniversary Edition, Limited, Limited Platinum, LX, S, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Isolator Mount Bracket, Front Passenger Side Part Number: 68373034AA
$38.22 MSRP: $54.95
You Save: $16.73 (31%)
ADD TO CART
Product Specifications
- Other Name: Bracket - Crossmember; Suspension Subframe Reinforcement Bracket, Front Left, Front Right; Bracket Crossmember
- Position: Front Passenger Side
- Replaces: 4721618AC, 4721618AE, 4721618AD, 4721618AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2016 Chrysler Town & Country | 30th Anniversary Edition, Limited, Limited Platinum, LX, S, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Support, Passenger Side Part Number: 4809274AC
$106.74 MSRP: $135.31
You Save: $28.57 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Radiator; Radiator Support Side Panel, Right; Support Radiator Condenser Mounting with Isolators and Lower Isolators.
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Support, Driver Side Part Number: 4809273AC
$108.57 MSRP: $137.63
You Save: $29.06 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Radiator; Radiator Support Side Panel, Left; Support Radiator Condenser Mounting; With Lower Isolators; With Isolators.
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Support Part Number: 4677698AA
Product Specifications
- Other Name: Bracket - Radiator; Bracket Radiator Upper
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chrysler Town & Country | Base, LX, Limited, Touring | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Vertical Support Part Number: 4674123
Product Specifications
- Other Name: Bracket - Radiator Closure Panel
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1995 Chrysler Town & Country | Base | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

Chrysler Town & Country Radiator Support

Choose OEM Radiator Support that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Radiator Support follows strict manufacturing steps to lock in quality and fit. If your Chrysler Town & Country matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Town & Country parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Town & Country Radiator Support Parts and Q&A

Support Brace
68023328AA
Q: How to Install a Radiator Support on Chrysler Town & Country?
A:
Make sure you attach the Vehicle Emission Control Information (VECI) label to the component if replacing a crossmember. Install the Hood Latch cable onto the crossmember at the beginning. The radiator crossmember (2) should be placed on the car so that the paint breaks above the bolt heads are matched up. Use bolts (1) to connect the crossmember to the body, then tighten them to 19 Nm (14 ft. lbs.) of torque. Attachment the hood latch cable (2) to the hood latch (1). Align the hood latch with the holes and paint breaks around the bolts, then fasten the bolts to 13.5 Nm (10 ft. lbs.) torque. After that, attach the two crossmember brace bolts (2) and tighten them to 19 Nm (14 ft. lbs.) torque. After that, put in the grille push pins (2) and fastener bolts (3) and make sure the hood latch is working and the hood is level.
Support
4677698AA
Q: How to Remove the Radiator Support on Chrysler Town & Country?
A:
To take out the radiator upper crossmember, first pull open the Hood Latch and raise the hood. After that, loosen the radiator sight shield and remove the engine air inlet resonator. Detach the hood cable from the upper radiator crossmember and then take out the bolts connecting the latch to that place. Pull out the hood prop rod and unscrew the screw locating the coolant recovery bottle to the crossmember. After removing the bolts holding the radiator isolators to the crossmember, pull out the bolts attaching the ends of the crossmember to the radiator closure panel. Pull the crossmember upward and away from the resealed radiator panel, then take it out of the vehicle.