How to remove a Vapor Canister on Chrysler Town & Country?

The first thing to do is raise and support the vehicle before removing the rear EVAP canister. After that, unconnect 3 hoses and remove the bolt. Slide the canister backwards to finish the removal process.

How to Install a Vapor Canister for Emission Control on Chrysler Town & Country?

The first step is to attach the vapor canister (2) and afterward, connect the vapor canister quick connector (3) to the fuel tank control valve. Later, attach the vapor canister quick connector (1) to the vapor line. When pulling out the fuel tank, it should be lifted with a transmission jack or similar device and fastened with straps so it won't tip over or leak. When the fuel tank is in place, bolt on the vapor canister bracket bolt (1) and tighten it to 54 Nm (40 ft. lbs.), then secure all fuel tank strap bolts (3) to the given torque specification. After that, connect the fresh air hose (3) to the evaporative system integrity monitor (ESIM) switch (2) and link the electrical connector (1) to the ESIM switch (2). Now, link the fuel line quick connect fitting (1) to the evaporator hose quick connect fitting (2), after which you should link the body harness connector. Attach the fuel fill hose and hose clamp (1) to the fuel tank so that the clamp is secure and use the fuel cap to seal the tank. In the end, use the scan tool ASD Fuel System Test to increase fuel pressure and see if there are any leaks.

OEM Chrysler Town & Country Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Vapor Canisters found

View related parts
Chrysler Town & Country Vapor Canister Part Number: 4891624AB
$390.45 MSRP: $570.00
You Save: $179.55 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor
- Replaces: 4891624AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2007 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited, Touring | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Vapor Canister Part Number: 5147384AL
$256.06 MSRP: $377.00
You Save: $120.94 (33%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor
- Replaces: 68000382AD, 5147384AF, 5147384AI, 5147384AB, 5147384AJ, 5147384AD, 68000382AF, 5147384AE, 5147384AC, 5147384AG, 5147384AH, 5147384AK, 68000382AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2016 Chrysler Town & Country | 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Vapor Canister Part Number: 4861440AA
$159.10 MSRP: $201.69
You Save: $42.59 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister - Vapor; Canister Vapor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Town & Country | EL, EX, LX, LXi, Limited | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Vapor Canister Part Number: 5281263
Product Specifications
- Other Name: Canister - Vapor; Canister, Evaporator; Canister, Vapor; Canister Vapor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Town & Country | Base, LX, LXi, Limited, SX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Vapor Canister Part Number: 4601673
Product Specifications
- Other Name: Canister - Vapor; Canister, Vacuum; Canister, Vapor; Canister Vapor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1995 Chrysler Town & Country | Base | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Vapor Canister Part Number: 4861436AA
Product Specifications
- Other Name: Canister - Vapor; Canister Vapor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chrysler Town & Country | EL, EX, LX, LXi, Limited | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Vapor Canister Part Number: 4723550
Product Specifications
- Other Name: Canister Package - Vapor; Canister, Vapor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1990-1993 Chrysler Town & Country | Base | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
View related parts
Chrysler Town & Country Vapor Canister Part Number: 4271982
Product Specifications
- Other Name: Can Package - Vapor 3 Portion; Canister, Vapor-3 Portion - Stamped 4227028, 4241836; Canister, Vapor-3 Portion; Canister, Vapor
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1984-1985 Chrysler Town & Country | Base, Mark Cross | 4 Cyl 2.2 L GAS

Chrysler Town & Country Vapor Canister

Choose OEM Vapor Canister that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Vapor Canister follows strict manufacturing steps to lock in quality and fit. If your Chrysler Town & Country matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Town & Country parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Vapor Canister in Chrysler Town & Country vehicles are part of the evaporative emissions control (EVAP) system whose purpose is to minimize the emission of hydrocarbons to the atmosphere. It works through use of a carbon canister to store fuel vapors, where the carbon chars have a role of adsorbing the said fuel vapors. During the engine regulation, a purge valve opens and lets fresh air and stale fuel vapours into the engine for burning. Through the years, changes have been made on the type of Vapor Canister used in the model years of Town & Country though some models have come with a replaceable filter. Present generations have additional diagnostic features that include a canister vent solenoid as well as the fuel tank pressure sensor for leak detection. This transformation helps in improving emission control operation in the vehicle without compromising with the performance of the engine.

Chrysler Town & Country Vapor Canister Parts and Q&A

Vapor Canister
4891624AB
Q: How to remove a Vapor Canister on Chrysler Town & Country?
A:
The first thing to do is raise and support the vehicle before removing the rear EVAP canister. After that, unconnect 3 hoses and remove the bolt. Slide the canister backwards to finish the removal process.
Vapor Canister
5147384AL
Q: How to Install a Vapor Canister for Emission Control on Chrysler Town & Country?
A:
The first step is to attach the vapor canister (2) and afterward, connect the vapor canister quick connector (3) to the Fuel Tank control valve. Later, attach the vapor canister quick connector (1) to the vapor line. When pulling out the fuel tank, it should be lifted with a transmission jack or similar device and fastened with straps so it won't tip over or leak. When the fuel tank is in place, bolt on the vapor canister bracket bolt (1) and tighten it to 54 Nm (40 ft. lbs.), then secure all fuel tank strap bolts (3) to the given torque specification. After that, connect the fresh air hose (3) to the evaporative system integrity monitor (ESIM) switch (2) and link the electrical connector (1) to the ESIM switch (2). Now, link the fuel line quick connect fitting (1) to the evaporator hose quick connect fitting (2), after which you should link the body harness connector. Attach the fuel fill hose and hose clamp (1) to the fuel tank so that the clamp is secure and use the fuel cap to seal the tank. In the end, use the scan tool ASD Fuel System Test to increase fuel pressure and see if there are any leaks.