How to Service and Repair an Engine Mount for the Rear Mount on Chrysler Voyager?

Before you get started, lift the vehicle on a hoist and take out the rear mount heat shield. After that, remove the through bolt from the mount and the rear mount bracket, then the mount bolts and finally, the rear mount. Start by removing the bolts that hold on the rear mount bracket to the transaxle, then take out the bracket. If you removed the rear mount bracket, mount it first, next install the rear mount and its bolts, making sure to tighten them to 54 Nm (40 ft. lbs.). Afterward, set the mount in the same place and tighten it to the bolts on the bracket using a torque of 54 Nm (40 ft. lbs.). After that, attach the rear mount heat shield once more and slowly bring the vehicle down to the ground.

How to Service and Repair a Front Engine Mount on Chrysler Voyager?

You should first put the car on a hoist before starting the front engine mount service. Work on the bolts connected to the engine first; unbolt the front bolt from the insulator, then take out the front mount bolts to remove the whole insulator assembly. Should you need to, take out the front mounting bracket from the engine. If the front mount bracket was taken off, attach it first to the engine during installation. Then, fit the insulator mount assembly and bolt the front engine mount to it through the bolt. Finish the work by lowering the vehicle.

OEM Chrysler Voyager Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

26 Engine Mounts found

View related parts
Chrysler Voyager Front Support Part Number: 4861430AB
$144.64 MSRP: $229.00
You Save: $84.36 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Mount; Support Engine Mount
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Voyager | Base, Ec, LX | 4 Cyl 2.4 L GAS
View related parts
Chrysler Voyager Mount Bracket Part Number: 4612427AB
$64.00 MSRP: $96.05
You Save: $32.05 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Automatic Transmission Mount Bushing; Engine Mount Bracket; Engine Mount; Motor Mount; Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base, SE | 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Front Support Part Number: 4861295AB
$108.54 MSRP: $165.00
You Save: $56.46 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Engine Mount, Front; Engine Mount Bracket; Motor Mount; Mount; Support Engine Mount
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Voyager | Base, LX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Side Support, Passenger Side Part Number: 4861271AD
$117.92 MSRP: $177.00
You Save: $59.08 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Engine Mount, Right; Engine Mount Bracket; Motor Mount; Mount; Support Engine Mount
- Position: Passenger Side
- Replaces: 4861271AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Voyager | Base, LX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Strut Mount Part Number: 68485537AA
$46.07 MSRP: $68.60
You Save: $22.53 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine; Engine Torque Strut; Engine Mount Torque Strut; Motor Mount; Rear Support
- Replaces: 68224737AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2025 Chrysler Voyager | L, LX, LXi | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Voyager Side Support Part Number: 4861342AA
$20.01 MSRP: $115.00
You Save: $94.99 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Engine Mount Bracket; Motor Mount; Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base | 4 Cyl 2.4 L GAS
View related parts
Chrysler Voyager Side Support, Passenger Side Part Number: 4861272AE
$70.85 MSRP: $121.00
You Save: $50.15 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Engine Mount, Right; Engine Mount Bracket; Motor Mount; Mount; Support Engine Mount
- Position: Passenger Side
- Replaces: 4861272AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Voyager | Base, LX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Bracket - Transmission Mount Part Number: 68470172AA
$71.30 MSRP: $109.00
You Save: $37.70 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: TRANSMISSION MOUNT
- Replaces: 68224740AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2025 Chrysler Voyager | L, LX, LXi | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Voyager Side Support, Driver Side Part Number: 4861269AD
$88.27 MSRP: $133.00
You Save: $44.73 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Engine Mount, Left, Rear; Engine Mount Bracket; Transmission Mount; Motor Mount; Mount
- Position: Driver Side
- Replaces: 4861269AB, 4861269AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Voyager | Base, LX | 3.3L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Transmission Mount Isolator Part Number: 68224742AD
$159.47 MSRP: $242.00
You Save: $82.53 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Isolator-Transmission Mount; Isolator Transmission Mount
- Position: Driver Side
- Replaces: 68224742AC, 68224742AA, 68224742AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2025 Chrysler Voyager | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Voyager Front Support Part Number: 68224744AC
$57.98 MSRP: $86.95
You Save: $28.97 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount
- Replaces: 68224744AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2025 Chrysler Voyager | L, LX, LXi | 3.6L V6, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Voyager Mount Part Number: 68224746AD
$256.36 MSRP: $391.00
You Save: $134.64 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator; Engine Mount Bracket; Motor Mount; Isolator Engine Mount; Isolator
- Replaces: 68224746AB, 68224746AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2025 Chrysler Voyager | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Voyager Side Support, Driver Side Part Number: 4861270AC
$53.01 MSRP: $76.00
You Save: $22.99 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Engine Mount, Left, Rear; Engine Mount Bracket; Motor Mount; Mount
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Voyager | Base, LX | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Mount Bracket Part Number: 4893414AD
$56.43 MSRP: $82.95
You Save: $26.52 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine; Engine Mount Support Bracket; Engine Mount Bracket; Motor Mount; Support Engine Timing Cover
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2020-2025 Chrysler Voyager | L, LX, LXi | 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chrysler Voyager Side Support, Passenger Side Part Number: 4861395AC
$87.11 MSRP: $122.00
You Save: $34.89 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Engine Mount, Right; Engine Mount Bracket; Motor Mount; Mount
- Position: Passenger Side
- Replaces: 5110076AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2003 Chrysler Voyager | Base, Ec, LX | 4 Cyl 2.4 L GAS
View related parts
Chrysler Voyager Side Support, Driver Side Part Number: 4861478AD
$198.55 MSRP: $255.00
You Save: $56.45 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Engine Mount, Left; Engine Mount Bracket; Motor Mount; Mount
- Position: Driver Side
- Replaces: 4861478AC, 4861478AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2003 Chrysler Voyager | LX | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler Voyager Mount Bracket Part Number: 4861255AB
$14.11 MSRP: $17.89
You Save: $3.78 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket; Motor Mount; Bracket Engine Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base | 4 Cyl 2.4 L GAS
View related parts
Chrysler Voyager Mount Bracket Part Number: 4612914
Product Specifications
- Other Name: Bracket Engine Mount Right Ma; Engine Mount Bracket; Motor Mount; Bracket, Engine Mount - Right; Bracket Engine Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base | 4 Cyl 2.4 L GAS
View related parts
Chrysler Voyager Mount Bracket Part Number: 4612412
Product Specifications
- Other Name: Bracket - Engine Mount; Bracket, Collar Plate Engine Mount - Right; Bracket Engine Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base, SE | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Chrysler Voyager Side Support Part Number: 4612367
Product Specifications
- Other Name: Support - Right; Engine Mount Bracket; Engine Mount Bushing; Motor Mount; Support Assembly, Engine Mount - Right; Includes Isolator, Bracket, Support, Bolt, Nut.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000 Chrysler Voyager | Base, SE | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS

| Page 1 of 2 |Next >

1-20 of 26 Results

Chrysler Voyager Engine Mount

Choose OEM Engine Mount that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Engine Mount follows strict manufacturing steps to lock in quality and fit. If your Chrysler Voyager matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Voyager parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Voyager Engine Mount is one of the many and unique parts known for its dependability and functionality for the Chrysler Voyager car models. Containing noise and vibration originating from engine operation, the Engine Mount has the function of providing stable support to the engine and transaxle within the car's chassis. This is especially so in the case of Chrysler Voyager as it adds efficiency to the vehicle and safety to the engine by positioning it and safeguarding it from harm. Being an Engine Mount of Chrysler Voyager, it has under gone many changes over the period of time ranging from simple rubber mounts, to the fluid- filled hydraulic mounts and the modern electronic active mounts which changes stiffness according to the engine speed. Thus, the very flexibility of operation not only enhances effective power, but prolongs the service life of the car as well. The Chrysler Voyager Engine Mount occupies a rather unique position within the context of the automotive market regarding construction, as well as, the capability to deliver optimal vibration damping, which is important to driving comfort. Chrysler Voyager has sold more than 12 million units and is successfully setting its niche; the Engine Mount further testifies to the company's quality and tendency towards innovations. The Chrysler Voyager Engine Mount is very crucial, whether it's being used to drive through city roads or long distances, as it guarantees that users will have safe and enjoyable drive, which proves that it is perfect fit for the Chrysler Voyager series.

Chrysler Voyager Engine Mount Parts and Q&A

Side Support, Passenger Side
4861272AE
Q: How to Service and Repair an Engine Mount for the Rear Mount on Chrysler Voyager?
A:
Before you get started, lift the vehicle on a hoist and take out the rear mount heat shield. After that, remove the through bolt from the mount and the rear mount bracket, then the mount bolts and finally, the rear mount. Start by removing the bolts that hold on the rear mount bracket to the transaxle, then take out the bracket. If you removed the rear mount bracket, mount it first, next install the rear mount and its bolts, making sure to tighten them to 54 Nm (40 ft. lbs.). Afterward, set the mount in the same place and tighten it to the bolts on the bracket using a torque of 54 Nm (40 ft. lbs.). After that, attach the rear mount heat shield once more and slowly bring the vehicle down to the ground.
Side Support, Passenger Side
4861271AD
Q: How to Service and Repair a Front Engine Mount on Chrysler Voyager?
A:
You should first put the car on a hoist before starting the front engine mount service. Work on the bolts connected to the engine first; unbolt the front bolt from the insulator, then take out the front mount bolts to remove the whole insulator assembly. Should you need to, take out the front mounting bracket from the engine. If the front mount bracket was taken off, attach it first to the engine during installation. Then, fit the insulator mount assembly and bolt the front engine mount to it through the bolt. Finish the work by lowering the vehicle.