How to Remove and Replace a Drive Belt on Dodge Avenger?

The first step is to raise and support the car before taking off and putting on the drive belt. Following this, take the right front inner wheel splash shield off the car. Meaningfully turn the crankshaft in the clockwise direction. As you are doing this, move the power steering drive belt 2 clear of the power steering pulley 1. The last step is to take out the power steering drive belt.

How to Install a Drive Belt for Power Steering on Dodge Avenger?

First, fit the power steering drive belt onto the crankshaft pulley and make sure it is completelyfs seated in the grooves. Then, make sure the bottom of the drive belt goes on the bottom of the power steering pulley, using just wire ties with nylon locks. On the opposite side of the power steering pulley, slip in a nylon wire tie, 7.75X1/8x0.50 in., through one hole in the pulley and fix it by tightening it to hold the drive belt. Maintaining the belt's location, turn the engine clockwise until the belt is fixed properly onto the pulley; then, rotate further until the wire tie snaps. After that, untie the wire from the car and attach the right front inner wheel splash shield.

OEM Dodge Avenger Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Drive Belts found

View related parts
Dodge Avenger Serpentine Belt Part Number: 4891721AB
$39.38 MSRP: $58.35
You Save: $18.97 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2014 Dodge Avenger | Express, Lux, Mainstreet, R/T, SE, SXT | 4 Cyl 2.4 L GAS
View related parts
Dodge Avenger Serpentine Belt Part Number: 5184442AC
$45.56 MSRP: $67.50
You Save: $21.94 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2011-2014 Dodge Avenger | Express, Heat, Lux, Mainstreet, R/T, SE, SXT, SXT Plus | 6 Cyl 3.6 L FLEX
View related parts
Dodge Avenger Serpentine Belt Part Number: 4891875AA
$54.51 MSRP: $81.10
You Save: $26.59 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Avenger | R/T | 6 Cyl 3.5 L GAS
View related parts
Dodge Avenger Serpentine Belt Part Number: 4668240
$2.04 MSRP: $2.58
You Save: $0.54 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Alternator Drive; Alternator Belt; Belt, Alternator Drive; Belt Alternator Drive
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Dodge Avenger | Base, ES | 4 Cyl 2.0 L GAS
View related parts
Dodge Avenger Serpentine Belt Part Number: 5096323AA
$5.76 MSRP: $36.50
You Save: $30.74 (85%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Alternator Drive; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Power Steering Belt
- Replaces: MD308989
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2000 Dodge Avenger | Base, ES | 2.0L L4, 2.5L V6, 6 Cyl 2.5 L GAS
View related parts
Dodge Avenger Serpentine Belt Part Number: 4891704AA
$33.86 MSRP: $50.40
You Save: $16.54 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt - Serpentine; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt Accessory Drive; Belt Serpentine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Dodge Avenger | R/T, SE, SXT | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Dodge Avenger Serpentine Belt Part Number: 55111074AC
$32.96 MSRP: $48.85
You Save: $15.89 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cap - Coolant Recovery Bottle; Engine, Washer, Radiator Caps; Serpentine & V-Belts; Reservoir Cap; Filler Cap; Reservoir Tank Cap; Recovery Tank Cap; Cap
- Replaces: 55111074AA, 4682828, 5017468AA, 55111074AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2014 Dodge Avenger | SE, SXT | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Dodge Avenger Power Steering Belt Part Number: 4668223
Product Specifications
- Other Name: Belt; Serpentine Belt Drive Kit; Accessory Drive Belt; Serpentine Belt; Drive Belt; V-Belt; A/C Belt; V - Belt, Power Steering Oil Pump W/O A/C; Belt Power Steering Without A/C; Belt Power Steering
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Dodge Avenger | Base, ES | 4 Cyl 2.0 L GAS
View related parts
Dodge Avenger Drive Belt Part Number: 5096317AB
Product Specifications
- Other Name: Belt - A/C Compressor; Serpentine Belt Drive Kit; Serpentine Belt; V-Belt; Alternator Belt; A/C Belt; Water Pump Belt
- Replaces: 5096317AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Dodge Avenger | Base, ES | 6 Cyl 2.5 L GAS
View related parts
Dodge Avenger A/C Belt Part Number: 5096326AA
Product Specifications
- Other Name: Belt - A/C; Serpentine Belt Drive Kit; Serpentine Belt; Drive Belt; V-Belt
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1999-2000 Dodge Avenger | Base, ES | 6 Cyl 2.5 L GAS
View related parts
Dodge Avenger A/C Belt Part Number: 5096315AA
Product Specifications
- Other Name: Belt - A/C
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Dodge Avenger | Base, ES | 4 Cyl 2.0 L GAS

Dodge Avenger Drive Belt

Choose OEM Drive Belt that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Drive Belt follows strict manufacturing steps to lock in quality and fit. If your Dodge Avenger matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Avenger parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Drive belt in Dodge Avenger is a component that links the engine to many different addenda including the alternator and the A/C compressor. Serpentine belt is commonly used and it goes around these parts and connects them to crankshaft pulley. This arrangement facilitates the power transmission and most of the Drive Belts have a life expectancy of a hundred thousand miles, though one has to replace them if they get destroyed. Throughout the years, there have been different types of Drive Belts used in Dodge Avenger models, namely V-belts and multi-groove belts as well as their benefits. Another type of belt is the V-belts which offer excellent traction and are very durable and the other type is the multi-groove belts, which offer flexibility and great efficiency. This paper also sees the type of Drive Belt affect the performance of the vehicle and the amount of attention they would require for maintenance by the owner.

Dodge Avenger Drive Belt Parts and Q&A

Serpentine Belt
4891721AB
Q: How to Remove and Replace a Drive Belt on Dodge Avenger?
A:
The first step is to raise and support the car before taking off and putting on the drive belt. Following this, take the right front inner wheel splash shield off the car. Meaningfully turn the Crankshaft in the clockwise direction. As you are doing this, move the power steering drive belt 2 clear of the power steering pulley 1. The last step is to take out the power steering drive belt.
Serpentine Belt
4891875AA
Q: How to Install a Drive Belt for Power Steering on Dodge Avenger?
A:
First, fit the power steering drive belt onto the crankshaft pulley and make sure it is completelyfs seated in the grooves. Then, make sure the bottom of the drive belt goes on the bottom of the power steering pulley, using just wire ties with nylon locks. On the opposite side of the power steering pulley, slip in a nylon wire tie, 7.75X1/8x0.50 in., through one hole in the pulley and fix it by tightening it to hold the drive belt. Maintaining the belt's location, turn the engine clockwise until the belt is fixed properly onto the pulley; then, rotate further until the wire tie snaps. After that, untie the wire from the car and attach the right front inner wheel splash shield.