How to Install the Drive Shaft on Dodge Caliber?

Make sure the transaxle is in Neutral (N) and, if you find it hard to lift, ask a helper to help you place the propeller shaft assembly in position, inserting the propeller shaft spline into the Power Transfer Unit (PTU). Match the marks on the propeller shaft to the ones at the rear axle flange and place the shaft over the studs attached to the flange. Next, set in place the center support and secure it with the center support bolts which should be tightened to 41 Nm (30 ft. lbs). After that, fasten the propeller shaft nuts and tighten them to 58 Nm (43 ft. lbs.) and then tighten the heat shield nuts to 21 Nm (15 ft. lbs.). At last, check the PTU fluid level first.

OEM Dodge Caliber Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Drive Shaft found

View related parts
Dodge Caliber Drive Shaft Part Number: 5273310AB
$1149.20 MSRP: $1745.00
You Save: $595.80 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Drive; Driveshaft; Shaft Drive Rear
- Replaces: 5273310AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Caliber | R/T, SE, SRT-4, SXT | 2.4L L4, 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

Dodge Caliber Drive Shaft

Choose OEM Drive Shaft that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Drive Shaft follows strict manufacturing steps to lock in quality and fit. If your Dodge Caliber matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Caliber parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

To be more precise, the subject known as Dodge Caliber Drive Shaft relates to one of the aspects that can be considered to be rather emblematic of the Dodge Caliber line that was in production from 2007 to 2012. This important component delivers energy and turning force to the driving wheels; therefore, the Caliber works well and securely. The Dodge Caliber Drive Shaft comes with different models of Caliber, namely the SE and SXT, and is designed with competitive torsion and sheer stress besides the weight of the shaft. A solid body contributes to an increase of efficiency of the car and therefore the Dodge Caliber stands out from the rest of the car models in the market. In the Drive Shaft, there are important applications in both front-wheel drive and all-wheel drive systems, which link elements that need to be flexible since they are far apart or move. However, it must be pointed out that the Dodge Caliber Drive Shaft is also related to the crash worthiness of the car because it is designed to work at optimal efficiency in stressed conditions. Some of the aspects include multiple configurations available for various drive systems to enable the drivers to have superior and stable handling. Also, the Insurance Institute for Highway Safety gave the Dodge Caliber high safety ratings; moreover, it boasts a reliable Drive Shaft. Altogether, the Dodge Caliber Drive Shaft is seen as a combination of quality that is characteristic of the product, which makes it an essential part of the vehicle providing a direct impact on the driving characteristics.

Dodge Caliber Drive Shaft Parts and Q&A

Drive Shaft
5273310AB
Q: How to Install the Drive Shaft on Dodge Caliber?
A:
Make sure the transaxle is in Neutral (N) and, if you find it hard to lift, ask a helper to help you place the propeller shaft assembly in position, inserting the propeller shaft spline into the Power Transfer Unit (PTU). Match the marks on the propeller shaft to the ones at the rear axle flange and place the shaft over the studs attached to the flange. Next, set in place the center support and secure it with the center support bolts which should be tightened to 41 Nm (30 ft. lbs). After that, fasten the propeller shaft nuts and tighten them to 58 Nm (43 ft. lbs.) and then tighten the heat shield nuts to 21 Nm (15 ft. lbs.). At last, check the PTU fluid level first.